/* Check DIMM data bus width */
if (spd.dataw_lsb == 0x20) {
- burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+ else
+ burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
printf("\n DDR DIMM: data bus width is 32 bit");
} else {
burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
#ifdef CFG_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */
ddr->sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
-#else
- /* SS_EN = 0, source synchronous disable
- * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
- */
- ddr->sdram_clk_cntl = 0x00000000;
#endif
debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
sdram_cfg |= 0x10000000;
/* The DIMM is 32bit width */
- if (spd.dataw_lsb == 0x20)
- sdram_cfg |= 0x000C0000;
+ if (spd.dataw_lsb == 0x20) {
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ sdram_cfg |= 0x000C0000;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2)
+ sdram_cfg |= 0x00080000;
+ }
ddrc_ecc_enable = 0;