_vectors:
.long 0x00000000 /* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_R5200)
-.long 0x400
-#elif defined(CONFIG_M5282)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
.long _start - TEXT_BASE
#else
.long _START
nop
move.w #0x2700,%sr
-#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
+#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253)
move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */
move.c %d0, %MBAR
move.l #(CFG_INIT_RAM_ADDR + 1), %d0
movec %d0, %RAMBAR0
-#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */
+#endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
/* Initialize IPSBAR */
_flashbar_setup:
/* Initialize FLASHBAR: locate internal Flash and validate it */
- move.l #(CFG_INT_FLASH_BASE + 0x21), %d0
- movec %d0, %RAMBAR0
+ move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0
+ movec %d0, %FLASHBAR
jmp _after_flashbar_copy.L /* Force jump to absolute address */
_flashbar_setup_end:
nop
_after_flashbar_copy:
#else
/* Setup code to initialize FLASHBAR, if start from external Memory */
- move.l #(CFG_INT_FLASH_BASE + 0x21), %d0
- movec %d0, %RAMBAR0
+ move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0
+ movec %d0, %FLASHBAR
#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
#endif
* therefore no VBR to set
*/
#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+ move.l #CFG_INT_FLASH_BASE, %d0
+#else
move.l #CFG_FLASH_BASE, %d0
+#endif
movec %d0, %VBR
#endif
-#ifdef CONFIG_R5200
- move.l #(_flash_setup-CFG_FLASH_BASE), %a0
- move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1
- move.l #(CFG_INIT_RAM_ADDR), %a2
-_copy_flash:
- move.l (%a0)+, (%a2)+
- cmp.l %a0, %a1
- bgt.s _copy_flash
- jmp CFG_INIT_RAM_ADDR
-_after_flash_copy:
+#ifdef CONFIG_M5275
+ /* Initialize IPSBAR */
+ move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
+ move.l %d0, 0x40000000
+/* movec %d0, %MBAR */
+
+ /* Initialize RAMBAR: locate SRAM and validate it */
+ move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0
+ movec %d0, %RAMBAR1
#endif
#if 0
/*------------------------------------------------------------------------------*/
-#ifdef CONFIG_R5200
-_flash_setup:
- /* CSAR0 */
- move.l #((CFG_FLASH_BASE & 0xffff0000) >> 16), %d0
- move.w %d0, 0x40000080
-
- /* CSCR0 */
- move.l #0x2180, %d0 /* 8 wait states, 16bit port, auto ack, */
- move.w %d0, 0x4000008A
-
- /* CSMR0 */
- move.l #0x001f0001, %d0 /* 2 MB, valid */
- move.l %d0, 0x40000084
-
- jmp _after_flash_copy.L
-_flash_setup_end:
-#endif
-
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- move.l %a0, %a1
+ move.l %a0, %a1
add.l #(in_ram - CFG_MONITOR_BASE), %a1
jmp (%a1)
in_ram:
clear_bss:
- /*
+ /*
* Now clear BSS segment
*/
move.l %a0, %a1
/* set parameters for board_init_r */
move.l %a0,-(%sp) /* dest_addr */
move.l %d0,-(%sp) /* gd */
- #if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \
- defined(CFG_HALT_BEFOR_RAM_JUMP)
- halt
- #endif
+#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \
+ defined(CFG_HALT_BEFOR_RAM_JUMP)
+ halt
+#endif
jsr (%a1)
/*------------------------------------------------------------------------------*/
/*------------------------------------------------------------------------------*/
/* cache functions */
+#ifdef CONFIG_M5271
+ .globl icache_enable
+icache_enable:
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+
+ move.l #0x80000200, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ nop
+
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+#endif
+
#ifdef CONFIG_M5272
.globl icache_enable
icache_enable:
rts
#endif
+#if defined(CONFIG_M5275)
+/*
+ * Instruction cache only
+ */
+ .globl icache_enable
+icache_enable:
+ move.l #0x01400000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0x0000c000, %d0 /* Setup SDRAM caching */
+ movec %d0, %ACR0 /* Enable cache */
+ move.l #0x00000000, %d0 /* No other caching */
+ movec %d0, %ACR1 /* Enable cache */
+ move.l #0x80400100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ moveq #1, %d0
+ move.l %d0, icache_state
+ rts
+#endif
+
#ifdef CONFIG_M5282
.globl icache_enable
icache_enable:
rts
#endif
-#ifdef CONFIG_M5249
+#if defined(CONFIG_M5249) || defined(CONFIG_M5253)
.globl icache_enable
icache_enable:
/*
* Note: The 5249 Documentation doesn't give a bit position for CINV!
* From the 5272 and the 5307 documentation, I have deduced that it is
* probably CACR[24]. Should someone say something to Motorola?
- * ~Jeremy
+ * ~Jeremy
*/
move.l #0x01000000, %d0 /* Invalidate whole cache */
move.c %d0,%CACR
.globl icache_status
icache_status:
icache_state_access_3:
- move.l icache_state, %d0
+ move.l #(icache_state), %a0
+ move.l (%a0), %d0
rts
.data
icache_state:
.long 0 /* cache is diabled on inirialization */
+ .globl dcache_enable
+dcache_enable:
+ /* dummy function */
+ rts
+
+ .globl dcache_disable
+dcache_disable:
+ /* dummy function */
+ rts
+
+ .globl dcache_status
+dcache_status:
+ /* dummy function */
+ rts
+
/*------------------------------------------------------------------------------*/
.globl version_string
.ascii U_BOOT_VERSION
.ascii " (", __DATE__, " - ", __TIME__, ")"
.ascii CONFIG_IDENT_STRING, "\0"
+ .align 4
projects / platform / kernel / u-boot.git / blobdiff