# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
-# Free Software Foundation, Inc.
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
+# 2014, 2015 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
m4_include([ltsugar.m4])
m4_include([ltversion.m4])
m4_include([lt~obsolete.m4])
-m4_include([config/cloog.m4])
+m4_include([config/isl.m4])
AC_INIT(move-if-change)
AC_PREREQ(2.64)
# these library is used by various programs built for the build
# environment
#
-build_libs="build-libiberty"
+build_libs="build-libiberty build-libcpp"
# these tools are built for the build environment
build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
-#
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+#f
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
# the host libraries and the host tools (which may be a cross compiler)
# Note that libiberty is not a target library.
target_libraries="target-libgcc \
+ target-libbacktrace \
target-libgloss \
target-newlib \
target-libgomp \
+ target-libcilkrts \
+ target-liboffloadmic \
+ target-libatomic \
target-libitm \
target-libstdc++-v3 \
- target-libmudflap \
+ target-libsanitizer \
+ target-libvtv \
+ target-libmpx \
target-libssp \
target-libquadmath \
target-libgfortran \
fi
use_included_zlib=
+AC_ARG_WITH(system-zlib,
+[AS_HELP_STRING([--with-system-zlib], [use installed libz])])
# Make sure we don't let ZLIB be added if we didn't want it.
if test x$with_system_zlib = xyes ; then
use_included_zlib=no
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
+AC_ARG_ENABLE(as-accelerator-for,
+[AS_HELP_STRING([--enable-as-accelerator-for=ARG],
+ [build as offload target compiler.
+ Specify offload host triple by ARG])])
+
+AC_ARG_ENABLE(offload-targets,
+[AS_HELP_STRING([--enable-offload-targets=LIST],
+ [enable offloading to devices from comma-separated LIST of
+ TARGET[=DIR]. Use optional path to find offload target compiler
+ during the build])],
+[
+ if test x"$enable_offload_targets" = x; then
+ AC_MSG_ERROR([no offload targets specified])
+ fi
+], [enable_offload_targets=])
+
# Handle --enable-gold, --enable-ld.
# --disable-gold [--enable-ld]
# Build only ld. Default option.
is_elf=no
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
- | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+ | *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
| *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
- | *-*-solaris2* | *-*-nto*)
+ | *-*-solaris2* | *-*-nto* | *-*-nacl*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
if test "$is_elf" = "yes"; then
# Check for target supported by gold.
case "${target}" in
- i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
+ | aarch64*-*-* | tilegx*-*-*)
configdirs="$configdirs gold"
if test x${ENABLE_GOLD} = xdefault; then
default_ld=gold
;;
esac
+# PR gas/19109
+# Decide the default method for compressing debug sections.
+# Provide a configure time option to override our default.
+AC_ARG_ENABLE(compressed_debug_sections,
+[AS_HELP_STRING([--enable-compressed-debug-sections={all,gas,gold,ld,none}],
+ [Enable compressed debug sections for gas, gold or ld by
+ default])],
+[
+ if test x"$enable_compressed_debug_sections" = xyes; then
+ AC_MSG_ERROR([no program with compressed debug sections specified])
+ fi
+], [enable_compressed_debug_sections=])
+
# Configure extra directories which are host specific
case "${host}" in
ENABLE_LIBSSP=$enableval,
ENABLE_LIBSSP=yes)
+AC_ARG_ENABLE(libstdcxx,
+AS_HELP_STRING([--disable-libstdcxx],
+ [do not build libstdc++-v3 directory]),
+ENABLE_LIBSTDCXX=$enableval,
+ENABLE_LIBSTDCXX=default)
+[if test "${ENABLE_LIBSTDCXX}" = "no" ; then
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+fi]
+
+# If this is accelerator compiler and its target is intelmic we enable
+# target liboffloadmic by default. If this is compiler with offloading
+# for intelmic we enable host liboffloadmic by default. Otherwise
+# liboffloadmic is disabled by default.
+AC_ARG_ENABLE([liboffloadmic],
+AC_HELP_STRING([[--enable-liboffloadmic[=ARG]]],
+ [build liboffloadmic @<:@ARG={no,host,target}@:>@]),
+[case "$enableval" in
+ no | host | target)
+ enable_liboffloadmic=$enableval ;;
+ *)
+ AC_MSG_ERROR([--enable-liboffloadmic=no/host/target]) ;;
+esac],
+[if test x"$enable_as_accelerator_for" != x; then
+ case "${target}" in
+ *-intelmic-* | *-intelmicemul-*)
+ enable_liboffloadmic=target
+ extra_liboffloadmic_configure_flags="--enable-liboffloadmic=target"
+ ;;
+ *)
+ enable_liboffloadmic=no
+ ;;
+ esac
+else
+ case "${enable_offload_targets}" in
+ *-intelmic-* | *-intelmicemul-*)
+ enable_liboffloadmic=host
+ extra_liboffloadmic_configure_flags="--enable-liboffloadmic=host"
+ ;;
+ *)
+ enable_liboffloadmic=no
+ ;;
+ esac
+fi])
+AC_SUBST(extra_liboffloadmic_configure_flags)
+
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
fi
AC_SUBST(EXTRA_CONFIGARGS_LIBJAVA)
-# Disable libmudflap on some systems.
-if test x$enable_libmudflap = x ; then
- case "${target}" in
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu)
- # Enable libmudflap by default in GNU and friends.
- ;;
- *-*-freebsd*)
- # Enable libmudflap by default in FreeBSD.
- ;;
- *)
- # Disable it by default everywhere else.
- noconfigdirs="$noconfigdirs target-libmudflap"
- ;;
- esac
-fi
-
-# Disable libgomp on non POSIX hosted systems.
+# Enable libgomp by default on hosted POSIX systems, and a few others.
if test x$enable_libgomp = x ; then
- # Enable libgomp by default on hosted POSIX systems.
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
*-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
;;
- *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+ *-*-solaris2* | *-*-hpux11*)
;;
*-*-darwin* | *-*-aix*)
;;
+ nvptx*-*-*)
+ ;;
*)
noconfigdirs="$noconfigdirs target-libgomp"
;;
esac
fi
+# Disable libatomic on unsupported systems.
+if test -d ${srcdir}/libatomic; then
+ if test x$enable_libatomic = x; then
+ AC_MSG_CHECKING([for libatomic support])
+ if (srcdir=${srcdir}/libatomic; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libatomic"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
+# Disable libcilkrts on unsupported systems.
+if test -d ${srcdir}/libcilkrts; then
+ if test x$enable_libcilkrts = x; then
+ AC_MSG_CHECKING([for libcilkrts support])
+ if (srcdir=${srcdir}/libcilkrts; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libcilkrts"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
+# Disable liboffloadmic on unsupported systems.
+if test -d ${srcdir}/liboffloadmic; then
+ if test x$enable_liboffloadmic != xno; then
+ AC_MSG_CHECKING([for liboffloadmic support])
+ if (srcdir=${srcdir}/liboffloadmic; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-liboffloadmic"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
# Disable libitm on unsupported systems.
if test -d ${srcdir}/libitm; then
if test x$enable_libitm = x; then
fi
fi
+# Disable libsanitizer on unsupported systems.
+if test -d ${srcdir}/libsanitizer; then
+ if test x$enable_libsanitizer = x; then
+ AC_MSG_CHECKING([for libsanitizer support])
+ if (srcdir=${srcdir}/libsanitizer; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libsanitizer"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
+# Disable libvtv on unsupported systems.
+if test -d ${srcdir}/libvtv; then
+ if test x$enable_libvtv = x; then
+ AC_MSG_CHECKING([for libvtv support])
+ if (srcdir=${srcdir}/libvtv; \
+ . ${srcdir}/configure.tgt; \
+ test "$VTV_SUPPORTED" != "yes")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libvtv"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
+
+# Enable libmpx on supported systems by request.
+if test -d ${srcdir}/libmpx; then
+ if test x$enable_libmpx = x; then
+ AC_MSG_CHECKING([for libmpx support])
+ if (srcdir=${srcdir}/libmpx; \
+ . ${srcdir}/configure.tgt; \
+ test "$LIBMPX_SUPPORTED" != "yes")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libmpx"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
+
+
+# Disable libquadmath for some systems.
+case "${target}" in
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libquadmath"
+ ;;
+ # libquadmath is unused on AIX and libquadmath build process use of
+ # LD_LIBRARY_PATH can break AIX bootstrap.
+ powerpc-*-aix* | rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs target-libquadmath"
+ ;;
+esac
+
# Disable libssp for some systems.
case "${target}" in
avr-*-*)
noconfigdirs="$noconfigdirs target-libssp"
;;
rl78-*-*)
- # Dereferencing -1 is a compile-time error
+ # libssp uses a misaligned load to trigger a fault, but the RL78
+ # doesn't fault for those - instead, it gives a build-time error
+ # for explicit misaligned loads.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ visium-*-*)
+ # No hosted I/O support.
noconfigdirs="$noconfigdirs target-libssp"
;;
esac
# Disable libstdc++-v3 for some systems.
-case "${target}" in
- *-*-vxworks*)
- # VxWorks uses the Dinkumware C++ library.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
- arm*-wince-pe*)
- # the C++ libraries don't build on top of CE's C libraries
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
- avr-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
-esac
+# Allow user to override this if they pass --enable-libstdc++-v3
+if test "${ENABLE_LIBSTDCXX}" = "default" ; then
+ case "${target}" in
+ *-*-vxworks*)
+ # VxWorks uses the Dinkumware C++ library.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ arm*-wince-pe*)
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ ft32-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ esac
+fi
# Disable Fortran for some systems.
case "${target}" in
# Disable Java if libffi is not supported.
case "${target}" in
+ aarch64-*-*)
+ ;;
alpha*-*-*)
;;
arm*-*-*)
;;
m68k-*-*)
;;
- mips-sgi-irix6.* | mips*-*-rtems*)
+ mips*-*-rtems*)
;;
mips*-*-linux*)
;;
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ arm*-*-freebsd*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- mips*-*-irix6*)
- # Linking libjava exceeds command-line length limits on at least
- # IRIX 6.2, but not on IRIX 6.5.
- # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
- # <oldham@codesourcery.com>
+ ft32-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
+ ;;
+esac
+
+# Disable the go frontend on systems where it is known to not work. Please keep
+# this in sync with contrib/config-list.mk.
+case "${target}" in
+*-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix*)
+ unsupported_languages="$unsupported_languages go"
+ ;;
esac
+# Disable libgo for some systems where it is known to not work.
+# For testing, you can easily override this with --enable-libgo.
+if test x$enable_libgo = x; then
+ case "${target}" in
+ *-*-darwin*)
+ # PR 46986
+ noconfigdirs="$noconfigdirs target-libgo"
+ ;;
+ *-*-cygwin* | *-*-mingw*)
+ noconfigdirs="$noconfigdirs target-libgo"
+ ;;
+ *-*-aix*)
+ noconfigdirs="$noconfigdirs target-libgo"
+ ;;
+ esac
+fi
+
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
libgloss_dir=wince
;;
+ aarch64*-*-* )
+ libgloss_dir=aarch64
+ ;;
arm*-*-*)
libgloss_dir=arm
;;
case "${target}" in
*-*-chorusos)
;;
+ aarch64-*-darwin*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ ;;
+ arm-*-darwin*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ ;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss"
+ # this is not caught below because this stanza matches earlier
+ case $target in
+ or1k*-*-*) noconfigdirs="$noconfigdirs gdb" ;;
+ esac
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
;;
- arc-*-*)
+ arc-*-*|arceb-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-pe*)
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
+ avr-*-rtems*)
+ ;;
+ avr-*-*)
+ if test x${with_avrlibc} != xno; then
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ fi
+ ;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
tic54x-*-*)
noconfigdirs="$noconfigdirs target-libgloss gdb"
;;
- cr16-*-*)
- noconfigdirs="$noconfigdirs gdb"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs gdb"
;;
+ ft32-*-*)
+ noconfigdirs="$noconfigdirs target-rda gprof"
+ ;;
moxie-*-*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs"
;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
+ hppa*64*-*-hpux*)
+ noconfigdirs="$noconfigdirs gdb"
+ ;;
+ hppa*-*-hpux11*)
+ noconfigdirs="$noconfigdirs gdb ld"
+ ;;
hppa*64*-*-linux*)
;;
hppa*-*-linux*)
hppa*-*-openbsd* | \
hppa*64*-*-*)
;;
- hppa*-hp-hpux11*)
- noconfigdirs="$noconfigdirs ld"
- ;;
hppa*-*-pro*)
;;
hppa*-*-*)
;;
ia64*-**-hpux*)
# No ld support yet.
- noconfigdirs="$noconfigdirs libgui itcl ld"
+ noconfigdirs="$noconfigdirs gdb libgui itcl ld"
;;
ia64*-*-*vms*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs readline libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs libgui itcl ld"
;;
i[[3456789]]86-w64-mingw*)
;;
microblaze*)
noconfigdirs="$noconfigdirs gprof"
;;
- mips*-sde-elf*)
+ mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
fi
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs ld gas gprof target-libgloss"
;;
mips*-*-linux*)
;;
+ mips*-*-ultrix* | mips*-*-osf* | mips*-*-ecoff* | mips*-*-pe* \
+ | mips*-*-irix* | mips*-*-lnews* | mips*-*-riscos*)
+ noconfigdirs="$noconfigdirs ld gas gprof"
+ ;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof"
;;
+ nds32*-*-*)
+ noconfigdirs="$noconfigdirs gdb"
+ ;;
+ nvptx*-*-*)
+ noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-libobjc"
+ ;;
+ or1k*-*-*)
+ noconfigdirs="$noconfigdirs gdb"
+ ;;
sh-*-* | sh64-*-*)
case "${target}" in
sh*-*-elf)
tic6x-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- tilepro-*-* | tilegx-*-*)
+ tilepro*-*-* | tilegx*-*-*)
noconfigdirs="$noconfigdirs sim"
;;
v810-*-*)
*-mingw*)
host_makefile_frag="config/mh-mingw"
;;
- *-interix*)
- host_makefile_frag="config/mh-interix"
+ alpha*-linux*)
+ host_makefile_frag="config/mh-alpha-linux"
;;
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
fi
fi
+# Check whether -static-libstdc++ -static-libgcc is supported.
+have_static_libs=no
+if test "$GCC" = yes; then
+ saved_LDFLAGS="$LDFLAGS"
+
+ LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
+ AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
+ AC_LANG_PUSH(C++)
+ AC_LINK_IFELSE([
+#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+#error -static-libstdc++ not implemented
+#endif
+int main() {}],
+ [AC_MSG_RESULT([yes]); have_static_libs=yes],
+ [AC_MSG_RESULT([no])])
+ AC_LANG_POP(C++)
+
+ LDFLAGS="$saved_LDFLAGS"
+fi
+
ACX_PROG_GNAT
ACX_PROG_CMP_IGNORE_INITIAL
;;
esac
-# See if we are building gcc with C++.
-AC_ARG_ENABLE(build-with-cxx,
-[AS_HELP_STRING([--enable-build-with-cxx],
- [build with C++ compiler instead of C compiler])],
-ENABLE_BUILD_WITH_CXX=$enableval,
-ENABLE_BUILD_WITH_CXX=no)
-
-# Build stage1 with C and build stages 2 and 3 with C++.
-AC_ARG_ENABLE(build-poststage1-with-cxx,
-[AS_HELP_STRING([--enable-build-poststage1-with-cxx],
- [build stages 2 and 3 with C++, not C])],
-ENABLE_BUILD_POSTSTAGE1_WITH_CXX=$enableval,
-ENABLE_BUILD_POSTSTAGE1_WITH_CXX=yes)
+# When bootstrapping with GCC, build stage 1 in C++98 mode to ensure that a
+# C++98 compiler can still start the bootstrap.
+if test "$enable_bootstrap:$GXX" = "yes:yes"; then
+ CXX="$CXX -std=gnu++98"
+fi
# Used for setting $lt_cv_objdir
_LT_CHECK_OBJDIR
gmplibs="-L$with_mpfr_lib $gmplibs"
fi
if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
- gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
- gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
- extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+ # MPFR v3.1.0 moved the sources into a src sub-directory.
+ if test -d ${srcdir}/mpfr/src; then
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir $gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr/src -I$$s/mpfr/src '"$gmpinc"
+ extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr/src --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir"
+ else
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
+ extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+ fi
# Do not test the mpfr version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
+ extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
AC_TRY_COMPILE([#include "gmp.h"],[
#define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
#define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
- #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,0)
+ #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,3)
choke me
#endif
], [AC_TRY_COMPILE([#include <gmp.h>],[
AC_MSG_CHECKING([for the correct version of mpfr.h])
AC_TRY_COMPILE([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
choke me
#endif
], [AC_TRY_COMPILE([#include <gmp.h>
# The library versions listed in the error message below should match
# the HARD-minimums enforced above.
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+.
+ AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
their locations. Source code for these libraries can be found at
their respective hosting sites as well as at
AC_SUBST(extra_mpfr_configure_flags)
AC_SUBST(extra_mpc_gmp_configure_flags)
AC_SUBST(extra_mpc_mpfr_configure_flags)
-
-# Allow host libstdc++ to be specified for static linking with PPL.
-AC_ARG_WITH(host-libstdcxx,
-[AS_HELP_STRING([--with-host-libstdcxx=L],
- [use linker arguments L to link with libstdc++
- when linking with PPL])])
-
-case $with_host_libstdcxx in
- no|yes)
- AC_MSG_ERROR([-with-host-libstdcxx needs an argument])
- ;;
-esac
-
-# Linker flags to use for stage1 or when not boostrapping.
-AC_ARG_WITH(stage1-ldflags,
-[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
-[if test "$withval" = "no" -o "$withval" = "yes"; then
- stage1_ldflags=
- else
- stage1_ldflags=$withval
- fi],
-[stage1_ldflags=])
-AC_SUBST(stage1_ldflags)
+AC_SUBST(extra_isl_gmp_configure_flags)
# Libraries to use for stage1 or when not bootstrapping.
AC_ARG_WITH(stage1-libs,
else
stage1_libs=$withval
fi],
-[stage1_libs=$with_host_libstdcxx])
+[stage1_libs=])
AC_SUBST(stage1_libs)
-# Libraries to use for stage2 and later builds. This defaults to the
-# argument passed to --with-host-libstdcxx.
+# Linker flags to use for stage1 or when not bootstrapping.
+AC_ARG_WITH(stage1-ldflags,
+[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
+[if test "$withval" = "no" -o "$withval" = "yes"; then
+ stage1_ldflags=
+ else
+ stage1_ldflags=$withval
+ fi],
+[stage1_ldflags=
+ # In stage 1, default to linking libstdc++ and libgcc statically with GCC
+ # if supported. But if the user explicitly specified the libraries to use,
+ # trust that they are doing what they want.
+ if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
+ stage1_ldflags="-static-libstdc++ -static-libgcc"
+ fi])
+AC_SUBST(stage1_ldflags)
+
+# Libraries to use for stage2 and later builds.
AC_ARG_WITH(boot-libs,
[AS_HELP_STRING([--with-boot-libs=LIBS], [libraries for stage2 and later])],
[if test "$withval" = "no" -o "$withval" = "yes"; then
else
poststage1_libs=$withval
fi],
-[poststage1_libs=$with_host_libstdcxx])
+[poststage1_libs=])
AC_SUBST(poststage1_libs)
# Linker flags to use for stage2 and later builds.
fi])
AC_SUBST(poststage1_ldflags)
-# Check for PPL
-ppllibs=
-pplinc=
-pwllib=
-
-AC_ARG_WITH(ppl,
-[AS_HELP_STRING([--with-ppl=PATH],
- [specify prefix directory for the installed PPL package.
- Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib])])
-AC_ARG_WITH(ppl-include,
-[AS_HELP_STRING([--with-ppl-include=PATH],
- [specify directory for installed PPL include files])])
-AC_ARG_WITH(ppl-lib,
-[AS_HELP_STRING([--with-ppl-lib=PATH],
- [specify directory for the installed PPL library])])
-
-AC_ARG_ENABLE(ppl-version-check,
-[AS_HELP_STRING([--disable-ppl-version-check],
- [disable check for PPL version])])
-
-case $with_ppl in
- yes | no | "")
- ;;
- *)
- ppllibs="-L$with_ppl/lib"
- pplinc="-I$with_ppl/include $pplinc"
- if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
- with_ppl=yes
- else
- AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"])
- fi
- ;;
-esac
-
-if test x"$with_ppl_include" != x; then
- pplinc="-I$with_ppl_include $pplinc"
- with_ppl=yes
-fi
+# GCC GRAPHITE dependency isl.
+# Basic setup is inlined here, actual checks are in config/isl.m4
-if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib"
- with_ppl=yes
-fi
+AC_ARG_WITH(isl,
+ [AS_HELP_STRING(
+ [--with-isl=PATH],
+ [Specify prefix directory for the installed isl package.
+ Equivalent to --with-isl-include=PATH/include
+ plus --with-isl-lib=PATH/lib])])
-if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- if test x"$enable_watchdog" = xyes; then
- pwllib="-lpwl"
- fi
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
- pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
- enable_ppl_version_check=no
- with_ppl=yes
+# Treat --without-isl as a request to disable
+# GRAPHITE support and skip all following checks.
+if test "x$with_isl" != "xno"; then
+ # Check for isl
+ dnl Provide configure switches and initialize islinc & isllibs
+ dnl with user input.
+ ISL_INIT_FLAGS
+ dnl The versions of isl that work for Graphite
+ ISL_CHECK_VERSION()
+ dnl Only execute fail-action, if isl has been requested.
+ ISL_IF_FAILED([
+ AC_MSG_ERROR([Unable to find a usable isl. See config.log for details.])])
fi
-if test "x$with_ppl" != xno; then
- if test "x$pwllib" = x; then
- saved_LIBS="$LIBS"
- LIBS="$LIBS $ppllibs -lstdc++ -lm"
- AC_CHECK_LIB(pwl, PWL_handle_timeout, [pwllib="-lpwl"])
- LIBS="$saved_LIBS"
- fi
-
- ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
-
- if test "$enable_ppl_version_check" != no; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL])
- AC_TRY_COMPILE([#include "ppl_c.h"],[
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
- choke me
- #endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
- CFLAGS="$saved_CFLAGS"
- fi
-fi
-
-# Flags needed for PPL
-AC_SUBST(ppllibs)
-AC_SUBST(pplinc)
-
-
-# Check for CLOOG
-
-dnl Provide configure switches and initialize clooginc & clooglibs
-dnl with user input.
-CLOOG_INIT_FLAGS
-if test "x$with_ppl" = "xno"; then
- dnl Only execute fail-action, if CLooG has been requested.
- CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no])
- if test "${graphite_requested}" = yes; then
- AC_MSG_ERROR([Unable to find a usable PPL. See config.log for details.])
- fi
- with_cloog=no
-fi
-if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
- && test "x${with_cloog_lib}" = x && test -d ${srcdir}/cloog; then
- clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' '
- clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
+# If the isl check failed, disable builds of in-tree variant of isl
+if test "x$with_isl" = xno ||
+ test "x$gcc_cv_isl" = xno; then
+ noconfigdirs="$noconfigdirs isl"
+ islinc=
fi
-if test "x$with_cloog" != "xno"; then
- dnl The minimal version of CLooG required for Graphite.
- dnl
- dnl If we use CLooG-Legacy, the provided version information is
- dnl ignored.
- CLOOG_CHECK_VERSION(0,16,1)
- dnl Only execute fail-action, if CLooG has been requested.
- CLOOG_IF_FAILED([
- AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
-fi
+AC_SUBST(isllibs)
+AC_SUBST(islinc)
# Check for LTO support.
AC_ARG_ENABLE(lto,
esac
])
-
-# By default, C is the only stage 1 language.
+AC_ARG_ENABLE(linker-plugin-configure-flags,
+ [AS_HELP_STRING([[--enable-linker-plugin-configure-flags=FLAGS]],
+ [additional flags for configuring linker plugins @<:@none@:>@])],
+ extra_linker_plugin_configure_flags=$enableval,
+ extra_linker_plugin_configure_flags=)
+AC_SUBST(extra_linker_plugin_configure_flags)
+AC_ARG_ENABLE(linker-plugin-flags,
+ [AS_HELP_STRING([[--enable-linker-plugin-flags=FLAGS]],
+ [additional flags for configuring and building linker plugins @<:@none@:>@])],
+ extra_linker_plugin_flags=$enableval,
+ extra_linker_plugin_flags=)
+AC_SUBST(extra_linker_plugin_flags)
+
+
+# By default, C and C++ are the only stage 1 languages.
stage1_languages=,c,
# Target libraries that we bootstrap.
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ echo configure.ac: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
else
enable_languages=all
fi
if test x"${enable_languages}" = x ||
test x"${enable_languages}" = xyes;
then
- echo configure.in: --enable-languages needs at least one language argument 1>&2
+ echo configure.ac: --enable-languages needs at least one language argument 1>&2
exit 1
fi
fi
# and make the substitution.
case ,${enable_languages}, in
*,f95,*)
- echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ echo configure.ac: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
;;
esac
- # If bootstrapping, then using --enable-build-with-cxx or
- # --enable-build-poststage1-with-cxx requires enabling C++.
- case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
- *,c++,*:*:*) ;;
- *:*,yes,*:yes)
+ # If bootstrapping, C++ must be enabled.
+ case ",$enable_languages,:$enable_bootstrap" in
+ *,c++,*:*) ;;
+ *:yes)
if test -f ${srcdir}/gcc/cp/config-lang.in; then
enable_languages="${enable_languages},c++"
else
- AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources])
+ AC_MSG_ERROR([bootstrapping requires c++ sources])
fi
;;
esac
new_enable_languages=,c,
# If LTO is enabled, add the LTO front end.
- extra_host_libiberty_configure_flags=
if test "$enable_lto" = "yes" ; then
case ,${enable_languages}, in
*,lto,*) ;;
esac
if test "${build_lto_plugin}" = "yes" ; then
configdirs="$configdirs lto-plugin"
- extra_host_libiberty_configure_flags=--enable-shared
fi
fi
- AC_SUBST(extra_host_libiberty_configure_flags)
+
+ # If we're building an offloading compiler, add the LTO front end.
+ if test x"$enable_as_accelerator_for" != x ; then
+ case ,${enable_languages}, in
+ *,lto,*) ;;
+ *) enable_languages="${enable_languages},lto" ;;
+ esac
+ fi
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
fi
if test "$language" = "c++"; then
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
- || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
- boot_language=yes
- fi
+ boot_language=yes
fi
+ add_this_lang=no
case ,${enable_languages}, in
*,${language},*)
- # Language was explicitly selected; include it.
- add_this_lang=yes
+ # Language was explicitly selected; include it
+ # unless it is C, which is enabled by default.
+ if test "$language" != "c"; then
+ add_this_lang=yes
+ fi
;;
*,all,*)
# 'all' was selected, select it if it is a default language
- add_this_lang=${build_by_default}
- ;;
- *)
- add_this_lang=no
+ if test "$language" != "c"; then
+ add_this_lang=${build_by_default}
+ fi
;;
esac
;;
esac
+# Disable libcilkrts, libitm, libsanitizer, libvtv, liboffloadmic if we're not building C++
+case ,${enable_languages}, in
+ *,c++,*)
+ # Disable libcilkrts, libitm, libsanitizer if we're not building libstdc++
+ case "${noconfigdirs}" in
+ *target-libstdc++-v3*)
+ noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer"
+ ;;
+ *) ;;
+ esac
+ ;;
+ *)
+ noconfigdirs="$noconfigdirs target-libcilkrts target-liboffloadmic target-libitm target-libsanitizer target-libvtv"
+ ;;
+esac
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
fi
done
+# Exclude target-zlib if target-libjava isn't built.
+case ${target_configdirs} in
+*target-libjava*)
+ ;;
+*)
+ target_configdirs="`echo ${target_configdirs} | sed -e 's/target-zlib//'`"
+ ;;
+esac
+
+# libiberty-linker-plugin is special: it doesn't have its own source directory,
+# so we have to add it after the preceding checks.
+if test x"$extra_linker_plugin_flags$extra_linker_plugin_configure_flags" != x
+then
+ case " $configdirs " in
+ *" libiberty "*)
+ # If we can build libiberty, we can also build libiberty-linker-plugin.
+ configdirs="$configdirs libiberty-linker-plugin"
+ extra_linker_plugin_configure_flags="$extra_linker_plugin_configure_flags \
+ --with-libiberty=../libiberty-linker-plugin";;
+ *)
+ AC_MSG_ERROR([libiberty missing]);;
+ esac
+fi
+
+# Sometimes we have special requirements for the host libiberty.
+extra_host_libiberty_configure_flags=
+extra_host_zlib_configure_flags=
+case " $configdirs " in
+ *" lto-plugin "* | *" libcc1 "*)
+ # When these are to be built as shared libraries, the same applies to
+ # libiberty.
+ extra_host_libiberty_configure_flags=--enable-shared
+ ;;
+ *" bfd "*)
+ # When bfd is to be built as a shared library, the same applies to
+ # zlib.
+ if test "$enable_shared" = "yes"; then
+ extra_host_zlib_configure_flags=--enable-host-shared
+ fi
+ ;;
+esac
+AC_SUBST(extra_host_libiberty_configure_flags)
+AC_SUBST(extra_host_zlib_configure_flags)
+
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# gcc) are built with "-O2 -g", so include those options when setting
# CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
if test "x$CFLAGS_FOR_TARGET" = x; then
- CFLAGS_FOR_TARGET=$CFLAGS
- case " $CFLAGS " in
- *" -O2 "*) ;;
- *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;;
- esac
- case " $CFLAGS " in
- *" -g "* | *" -g3 "*) ;;
- *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;;
- esac
+ if test "x${is_cross_compiler}" = xyes; then
+ CFLAGS_FOR_TARGET="-g -O2"
+ else
+ CFLAGS_FOR_TARGET=$CFLAGS
+ case " $CFLAGS " in
+ *" -O2 "*) ;;
+ *) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
+ esac
+ case " $CFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
+ esac
+ fi
fi
AC_SUBST(CFLAGS_FOR_TARGET)
if test "x$CXXFLAGS_FOR_TARGET" = x; then
- CXXFLAGS_FOR_TARGET=$CXXFLAGS
- case " $CXXFLAGS " in
- *" -O2 "*) ;;
- *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;;
- esac
- case " $CXXFLAGS " in
- *" -g "* | *" -g3 "*) ;;
- *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;;
- esac
+ if test "x${is_cross_compiler}" = xyes; then
+ CXXFLAGS_FOR_TARGET="-g -O2"
+ else
+ CXXFLAGS_FOR_TARGET=$CXXFLAGS
+ case " $CXXFLAGS " in
+ *" -O2 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
+ esac
+ case " $CXXFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
+ esac
+ fi
fi
AC_SUBST(CXXFLAGS_FOR_TARGET)
# have requested that this magic not happen.
#
# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
+# configure.ac, and the settings in configure.ac override this magic.
#
# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
- mips*-sde-elf*)
+ mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
target_makefile_frag="config/mt-sde"
;;
mipsisa*-*-elfoabi*)
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
+ nios2-*-elf*)
+ target_makefile_frag="config/mt-nios2-elf"
+ ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
- *-*-darwin[[3-9]]*)
- # ranlib before Darwin10 requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
esac
alphaieee_frag=/dev/null
:d30v-*)
ospace_frag="config/mt-d30v"
;;
- :m32r-* | :d10v-* | :fr30-*)
+ :m32r-* | :d10v-* | :fr30-* | :i?86*-*-elfiamcu)
ospace_frag="config/mt-ospace"
;;
no:* | :*)
;;
esac
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
- case "${target}" in
- mips*-*-irix[[56]]*)
- ;;
- mips*-*-* | alpha*-*-osf*)
- with_stabs=yes;
- extra_host_args="${extra_host_args} --with-stabs"
- ;;
- esac
-fi
-
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_noncanonical}
GCC_SHLIB_SUBDIR=
fi
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case $enable_bootstrap in
+ yes)
+ bootstrap_suffix=bootstrap
+ BUILD_CONFIG=bootstrap-debug
+ ;;
+ no)
+ bootstrap_suffix=no-bootstrap
+ BUILD_CONFIG=
+ ;;
+esac
+
+AC_MSG_CHECKING(for default BUILD_CONFIG)
+
+AC_ARG_WITH([build-config],
+ [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
+ [use config/NAME.mk build configuration])],
+ [case $with_build_config in
+ yes) with_build_config= ;;
+ no) with_build_config= BUILD_CONFIG= ;;
+ esac])
+
+if test "x${with_build_config}" != x; then
+ BUILD_CONFIG=$with_build_config
+else
+ case $BUILD_CONFIG in
+ bootstrap-debug)
+ if echo "int f (void) { return 0; }" > conftest.c &&
+ ${CC} -c conftest.c &&
+ mv conftest.o conftest.o.g0 &&
+ ${CC} -c -g conftest.c &&
+ mv conftest.o conftest.o.g &&
+ ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
+ :
+ else
+ BUILD_CONFIG=
+ fi
+ rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
+ ;;
+ esac
+fi
+AC_MSG_RESULT($BUILD_CONFIG)
+AC_SUBST(BUILD_CONFIG)
+
+# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
+AC_MSG_CHECKING([for --enable-vtable-verify])
+AC_ARG_ENABLE(vtable-verify,
+[AS_HELP_STRING([--enable-vtable-verify],
+ [Enable vtable verification feature])],
+[case "$enableval" in
+ yes) enable_vtable_verify=yes ;;
+ no) enable_vtable_verify=no ;;
+ *) enable_vtable_verify=no;;
+ esac],
+[enable_vtable_verify=no])
+AC_MSG_RESULT($enable_vtable_verify)
+
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+bootstrap_fixincludes=no
# If we are building libgomp, bootstrap it.
if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
fi
+# If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
+# or bootstrap-ubsan, bootstrap it.
+if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
+ case "$BUILD_CONFIG" in
+ *bootstrap-asan* | *bootstrap-ubsan* )
+ bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+ bootstrap_fixincludes=yes
+ ;;
+ esac
+fi
+
+# If we are building libvtv and --enable-vtable-verify, bootstrap it.
+if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
+ test "$enable_vtable_verify" != no; then
+ bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
+fi
+
+# If we are building libmpx, bootstrap it.
+if echo " ${target_configdirs} " | grep " libmpx " > /dev/null 2>&1; then
+ bootstrap_target_libs=${bootstrap_target_libs}target-libmpx,
+fi
+
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
;;
esac
-# Adjust the toplevel makefile according to whether bootstrap was selected.
-case $enable_bootstrap in
- yes)
- bootstrap_suffix=bootstrap
- BUILD_CONFIG=bootstrap-debug
- ;;
- no)
- bootstrap_suffix=no-bootstrap
- BUILD_CONFIG=
- ;;
-esac
-
-AC_MSG_CHECKING(for default BUILD_CONFIG)
-
-AC_ARG_WITH([build-config],
- [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
- [use config/NAME.mk build configuration])],
- [case $with_build_config in
- yes) with_build_config= ;;
- no) with_build_config= BUILD_CONFIG= ;;
- esac])
-
-if test "x${with_build_config}" != x; then
- BUILD_CONFIG=$with_build_config
-else
- case $BUILD_CONFIG in
- bootstrap-debug)
- if echo "int f (void) { return 0; }" > conftest.c &&
- ${CC} -c conftest.c &&
- mv conftest.o conftest.o.g0 &&
- ${CC} -c -g conftest.c &&
- mv conftest.o conftest.o.g &&
- ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
- :
- else
- BUILD_CONFIG=
- fi
- rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
- ;;
- esac
-fi
-AC_MSG_RESULT($BUILD_CONFIG)
-AC_SUBST(BUILD_CONFIG)
-
extrasub_build=
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
fi
done
fi
+ case ${module},${bootstrap_fixincludes} in
+ fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
+ *) host_bootstrap_suffix=$bootstrap_suffix ;;
+ esac
extrasub_host="$extrasub_host
/^@if $module\$/d
/^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
+/^@if $module-$host_bootstrap_suffix\$/d
+/^@endif $module-$host_bootstrap_suffix\$/d"
done
extrasub_target=
for module in ${target_configdirs} ; do
changequote([,])
case $lib in
- mpc | mpfr | gmp | ppl | cloog)
+ mpc | mpfr | gmp | isl)
# If we're processing --with-$lib, --with-$lib-include or
# --with-$lib-lib, for one of the libs above, and target is
# different from host, don't pass the current argument to any
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
-# desired.
-build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}"
+# desired. We can't even use the same cache file for all build-side
+# libraries, as they're compiled differently; some with C, some with
+# C++ or with different feature-enabling options.
+build_configargs="$build_configargs --cache-file=./config.cache ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
fi
+# Special user-friendly check for native x86_64-linux build, if
+# multilib is not explicitly enabled.
+case "$target:$have_compiler:$host:$target:$enable_multilib" in
+ x86_64-*linux*:yes:$build:$build:)
+ # Make sure we have a development environment that handles 32-bit
+ dev64=no
+ echo "int main () { return 0; }" > conftest.c
+ ${CC} -m32 -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+ if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ dev64=yes
+ fi
+ fi
+ rm -f conftest*
+ if test x${dev64} != xyes ; then
+ AC_MSG_ERROR([I suspect your system does not have 32-bit development libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib.])
+ fi
+ ;;
+esac
+
# Default to --enable-multilib.
if test x${enable_multilib} = x ; then
target_configargs="--enable-multilib ${target_configargs}"
*" --with-newlib "*)
case "$target" in
*-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
;;
esac
NCN_STRICT_CHECK_TOOLS(WINDMC, windmc)
NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
+NCN_STRICT_CHECK_TOOLS(READELF, readelf)
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld)
ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
+ACX_CHECK_INSTALLED_TARGET_TOOL(OBJCOPY_FOR_TARGET, objcopy)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
+ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc)
GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS
GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
- [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ [gcc/xg++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
c++)
GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
- [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs],
c++)
GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool])
GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
+GCC_TARGET_TOOL(objcopy, OBJCOPY_FOR_TARGET, OBJCOPY, [binutils/objcopy])
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
+GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])
GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new])
GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc])
esac ;;
esac
-# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
-if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then
- saved_CFLAGS="$CFLAGS"
-
- # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
- CFLAGS="$CFLAGS -fkeep-inline-functions"
- AC_MSG_CHECKING([whether -fkeep-inline-functions is supported])
- AC_TRY_COMPILE([
-#if (__GNUC__ < 3) \
- || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
- || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
-#error http://gcc.gnu.org/PR29382
-#endif
- ],,
- [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"],
- [AC_MSG_RESULT([no])])
-
- CFLAGS="$saved_CFLAGS"
-fi
-
AC_SUBST(stage1_cflags)
# Enable --enable-checking in stage1 of the compiler.
[choose additional checking for stage1 of the compiler])],
[stage1_checking=--enable-checking=${enable_stage1_checking}],
[if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
- stage1_checking=--enable-checking=yes,types
+ # For --disable-checking or implicit --enable-checking=release, avoid
+ # setting --enable-checking=gc in the default stage1 checking for LTO
+ # bootstraps. See PR62077.
+ stage1_checking=--enable-checking=release,misc,gimple,rtlflag,tree,types
+ case $BUILD_CONFIG in
+ *lto*)
+ if test "x$enable_checking" = x && \
+ test -d ${srcdir}/gcc && \
+ test x"`cat ${srcdir}/gcc/DEV-PHASE`" = xexperimental; then
+ stage1_checking=--enable-checking=yes,types
+ fi;;
+ *) stage1_checking=--enable-checking=yes,types;;
+ esac
else
stage1_checking=--enable-checking=$enable_checking,types
fi])
esac
AC_SUBST(stage2_werror_flag)
-# If using ENABLE_BUILD_POSTSTAGE1_WITH_CXX, pass
-# --enable-build-with-cxx after stage1.
-if test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
- POSTSTAGE1_CONFIGURE_FLAGS=--enable-build-with-cxx
-else
- POSTSTAGE1_CONFIGURE_FLAGS=
+# Enable --enable-host-shared.
+AC_ARG_ENABLE(host-shared,
+[AS_HELP_STRING([--enable-host-shared],
+ [build host code as shared libraries])],
+[host_shared=$enableval], [host_shared=no])
+AC_SUBST(host_shared)
+
+# PR jit/64780: Require the user to explicitly specify
+# --enable-host-shared if the jit is enabled, hinting
+# that they might want to do a separate configure/build of
+# the jit, to avoid users from slowing down the rest of the
+# compiler by enabling the jit.
+if test ${host_shared} = "no" ; then
+ case "${enable_languages}" in
+ *jit*)
+ AC_MSG_ERROR([
+Enabling language "jit" requires --enable-host-shared.
+
+--enable-host-shared typically slows the rest of the compiler down by
+a few %, so you must explicitly enable it.
+
+If you want to build both the jit and the regular compiler, it is often
+best to do this via two separate configure/builds, in separate
+directories, to avoid imposing the performance cost of
+--enable-host-shared on the regular compiler.])
+ ;;
+ *)
+ ;;
+ esac
fi
-AC_SUBST(POSTSTAGE1_CONFIGURE_FLAGS)
# Specify what files to not compare during bootstrap.
case "$target" in
hppa*64*-*-hpux*) ;;
hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
-esac
-case " $configdirs " in
-*" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;;
+ powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
esac
AC_SUBST(compare_exclusions)