# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
-# Copyright (C) 1998 - 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
-# are also available at http://curl.haxx.se/docs/copyright.html.
+# are also available at https://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
AC_PREREQ(2.57)
dnl We don't know the version number "statically" so we use a dash here
-AC_INIT([curl], [-], [a suitable curl mailing list: http://curl.haxx.se/mail/])
+AC_INIT([curl], [-], [a suitable curl mailing list: https://curl.haxx.se/mail/])
XC_OVR_ZZ50
+XC_OVR_ZZ60
CURL_OVERRIDE_AUTOCONF
dnl configure script copyright
-AC_COPYRIGHT([Copyright (c) 1998 - 2011 Daniel Stenberg, <daniel@haxx.se>
+AC_COPYRIGHT([Copyright (c) 1998 - 2016 Daniel Stenberg, <daniel@haxx.se>
This configure script may be copied, distributed and modified under the
terms of the curl license; see COPYING for more details])
AC_CONFIG_SRCDIR([lib/urldata.h])
-AM_CONFIG_HEADER(lib/curl_config.h include/curl/curlbuild.h)
+AC_CONFIG_HEADERS(lib/curl_config.h include/curl/curlbuild.h)
AC_CONFIG_MACRO_DIR([m4])
AM_MAINTAINER_MODE
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
CURL_CHECK_OPTION_DEBUG
CURL_CHECK_OPTION_OPTIMIZE
CURL_CHECK_OPTION_CURLDEBUG
CURL_CHECK_OPTION_SYMBOL_HIDING
CURL_CHECK_OPTION_ARES
+CURL_CHECK_OPTION_RT
-CURL_CHECK_PATH_SEPARATOR_REQUIRED
+XC_CHECK_PATH_SEPARATOR
#
# save the configure arguments
dnl figure out the libcurl version
CURLVERSION=`$SED -ne 's/^#define LIBCURL_VERSION "\(.*\)"/\1/p' ${srcdir}/include/curl/curlver.h`
-AM_INIT_AUTOMAKE
+XC_CHECK_PROG_CC
+XC_AUTOMAKE
AC_MSG_CHECKING([curl version])
AC_MSG_RESULT($CURLVERSION)
dnl
dnl initialize all the info variables
- curl_ssl_msg="no (--with-{ssl,gnutls,nss,polarssl,cyassl,axtls} )"
+ curl_ssl_msg="no (--with-{ssl,gnutls,nss,polarssl,mbedtls,cyassl,axtls,winssl,darwinssl} )"
curl_ssh_msg="no (--with-libssh2)"
curl_zlib_msg="no (--with-zlib)"
- curl_krb4_msg="no (--with-krb4*)"
curl_gss_msg="no (--with-gssapi)"
- curl_spnego_msg="no (--with-spnego)"
curl_tls_srp_msg="no (--enable-tls-srp)"
curl_res_msg="default (--enable-ares / --enable-threaded-resolver)"
curl_ipv6_msg="no (--enable-ipv6)"
- curl_idn_msg="no (--with-libidn)"
+curl_unix_sockets_msg="no (--enable-unix-sockets)"
+ curl_idn_msg="no (--with-{libidn,winidn})"
curl_manual_msg="no (--enable-manual)"
curl_libcurl_msg="enabled (--disable-libcurl-option)"
curl_verbose_msg="enabled (--disable-verbose)"
curl_ldaps_msg="no (--enable-ldaps)"
curl_rtsp_msg="no (--enable-rtsp)"
curl_rtmp_msg="no (--with-librtmp)"
+ curl_mtlnk_msg="no (--with-libmetalink)"
+ curl_psl_msg="no (--with-libpsl)"
+
init_ssl_msg=${curl_ssl_msg}
dnl
-dnl Save anything in $LIBS for later
+dnl Save some initial values the user might have provided
dnl
-ALL_LIBS=$LIBS
+INITIAL_LDFLAGS=$LDFLAGS
+INITIAL_LIBS=$LIBS
dnl
dnl Detect the canonical host and target build environment
AC_DEFINE_UNQUOTED(OS, "${host}", [cpu-machine-OS])
dnl Checks for programs.
-CURL_CHECK_PROG_CC
dnl Our curl_off_t internal and external configure settings
CURL_CONFIGURE_CURL_OFF_T
dnl check for how to do large files
AC_SYS_LARGEFILE
-dnl support building of Windows DLLs
-AC_LIBTOOL_WIN32_DLL
+XC_LIBTOOL
-dnl force libtool to build static libraries with PIC on AMD64-Linux & FreeBSD
-AC_MSG_CHECKING([if arch-OS host is AMD64-Linux/FreeBSD (to build static libraries with PIC)])
-case $host in
- x86_64*linux*|amd64*freebsd*|ia64*freebsd*)
- AC_MSG_RESULT([yes])
- with_pic=yes
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
-esac
+#
+# Automake conditionals based on libtool related checks
+#
-AC_MSG_CHECKING([if compiler is icc (to build with PIC)])
-case $CC in
- icc | */icc)
- AC_MSG_RESULT([yes])
- with_pic=yes
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
-esac
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_VERSION_INFO],
+ [test "x$xc_lt_shlib_use_version_info" = 'xyes'])
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_NO_UNDEFINED],
+ [test "x$xc_lt_shlib_use_no_undefined" = 'xyes'])
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_MIMPURE_TEXT],
+ [test "x$xc_lt_shlib_use_mimpure_text" = 'xyes'])
-dnl libtool setup
-AC_PROG_LIBTOOL
+#
+# Due to libtool and automake machinery limitations of not allowing
+# specifying separate CPPFLAGS or CFLAGS when compiling objects for
+# inclusion of these in shared or static libraries, we are forced to
+# build using separate configure runs for shared and static libraries
+# on systems where different CPPFLAGS or CFLAGS are mandatory in order
+# to compile objects for each kind of library. Notice that relying on
+# the '-DPIC' CFLAG that libtool provides is not valid given that the
+# user might for example choose to build static libraries with PIC.
+#
-AC_MSG_CHECKING([if we need -mimpure-text])
-mimpure=no
-case $host in
- *-*-solaris2*)
- if test "$GCC" = "yes"; then
- mimpure="yes"
- fi
- ;;
- *)
- ;;
-esac
-AC_MSG_RESULT($mimpure)
-AM_CONDITIONAL(MIMPURE, test x$mimpure = xyes)
+#
+# Make our Makefile.am files use the staticlib CPPFLAG only when strictly
+# targeting a static library and not building its shared counterpart.
+#
+
+AM_CONDITIONAL([USE_CPPFLAG_CURL_STATICLIB],
+ [test "x$xc_lt_build_static_only" = 'xyes'])
+
+#
+# Make staticlib CPPFLAG variable and its definition visible in output
+# files unconditionally, providing an empty definition unless strictly
+# targeting a static library and not building its shared counterpart.
+#
+
+CPPFLAG_CURL_STATICLIB=
+if test "x$xc_lt_build_static_only" = 'xyes'; then
+ CPPFLAG_CURL_STATICLIB='-DCURL_STATICLIB'
+fi
+AC_SUBST([CPPFLAG_CURL_STATICLIB])
-AC_MSG_CHECKING([if we need BUILDING_LIBCURL])
-use_cppflag_building_libcurl="no"
-use_cppflag_curl_staticlib="no"
-case $host in
- *-*-mingw*)
- AC_MSG_RESULT(yes)
- use_cppflag_building_libcurl="yes"
- AC_MSG_CHECKING([if we need CURL_STATICLIB])
- if test "X$enable_shared" = "Xno"
- then
- AC_MSG_RESULT(yes)
- use_cppflag_curl_staticlib="yes"
- else
- AC_MSG_RESULT(no)
- fi
- ;;
- *)
- AC_MSG_RESULT(no)
- ;;
-esac
-AM_CONDITIONAL(USE_CPPFLAG_BUILDING_LIBCURL, test x$use_cppflag_building_libcurl = xyes)
-AM_CONDITIONAL(USE_CPPFLAG_CURL_STATICLIB, test x$use_cppflag_curl_staticlib = xyes)
# Determine whether all dependent libraries must be specified when linking
if test "X$enable_shared" = "Xyes" -a "X$link_all_deplibs" = "Xno"
REQUIRE_LIB_DEPS=yes
fi
AC_SUBST(REQUIRE_LIB_DEPS)
-
-dnl The install stuff has already been taken care of by the automake stuff
-dnl AC_PROG_INSTALL
-AC_PROG_MAKE_SET
+AM_CONDITIONAL(USE_EXPLICIT_LIB_DEPS, test x$REQUIRE_LIB_DEPS = xyes)
dnl check if there's a way to force code inline
AC_C_INLINE
CURL_CHECK_COMPILER_HALT_ON_ERROR
CURL_CHECK_COMPILER_ARRAY_SIZE_NEGATIVE
+CURL_CHECK_COMPILER_PROTOTYPE_MISMATCH
CURL_CHECK_COMPILER_SYMBOL_HIDING
-CURL_CHECK_NO_UNDEFINED
-AM_CONDITIONAL(NO_UNDEFINED, test x$need_no_undefined = xyes)
-
CURL_CHECK_CURLDEBUG
AM_CONDITIONAL(CURLDEBUG, test x$want_curldebug = xyes)
CURL_CHECK_HEADER_WINDOWS
CURL_CHECK_NATIVE_WINDOWS
-case X-"$ac_cv_native_windows" in
+case X-"$curl_cv_native_windows" in
X-yes)
CURL_CHECK_HEADER_WINSOCK
CURL_CHECK_HEADER_WINSOCK2
CURL_CHECK_HEADER_WINBER
;;
*)
- ac_cv_header_winsock_h="no"
- ac_cv_header_winsock2_h="no"
- ac_cv_header_ws2tcpip_h="no"
- ac_cv_header_winldap_h="no"
- ac_cv_header_winber_h="no"
+ curl_cv_header_winsock_h="no"
+ curl_cv_header_winsock2_h="no"
+ curl_cv_header_ws2tcpip_h="no"
+ curl_cv_header_winldap_h="no"
+ curl_cv_header_winber_h="no"
;;
esac
CURL_CHECK_WIN32_LARGEFILE
)
+AC_MSG_CHECKING([whether to support smb])
+AC_ARG_ENABLE(smb,
+AC_HELP_STRING([--enable-smb],[Enable SMB/CIFS support])
+AC_HELP_STRING([--disable-smb],[Disable SMB/CIFS support]),
+[ case "$enableval" in
+ no)
+ AC_MSG_RESULT(no)
+ AC_DEFINE(CURL_DISABLE_SMB, 1, [to disable SMB/CIFS])
+ AC_SUBST(CURL_DISABLE_SMB, [1])
+ ;;
+ *) AC_MSG_RESULT(yes)
+ ;;
+ esac ],
+ AC_MSG_RESULT(yes)
+)
+
AC_MSG_CHECKING([whether to support smtp])
AC_ARG_ENABLE(smtp,
AC_HELP_STRING([--enable-smtp],[Enable SMTP support])
dnl Checks for libraries.
dnl **********************************************************************
+AC_MSG_CHECKING([whether to use libgcc])
+AC_ARG_ENABLE(libgcc,
+AC_HELP_STRING([--enable-libgcc],[use libgcc when linking]),
+[ case "$enableval" in
+ yes)
+ LIBS="-lgcc $LIBS"
+ AC_MSG_RESULT(yes)
+ ;;
+ *) AC_MSG_RESULT(no)
+ ;;
+ esac ],
+ AC_MSG_RESULT(no)
+)
+
CURL_CHECK_LIB_XNET
dnl gethostbyname without lib or in the nsl lib?
],
[ AC_CHECK_LIB(nsl, gethostbyname,
[HAVE_GETHOSTBYNAME="1"
- LIBS="$LIBS -lnsl"
+ LIBS="-lnsl $LIBS"
])
])
dnl gethostbyname in the socket lib?
AC_CHECK_LIB(socket, gethostbyname,
[HAVE_GETHOSTBYNAME="1"
- LIBS="$LIBS -lsocket"
+ LIBS="-lsocket $LIBS"
])
fi
[HAVE_GETHOSTBYNAME="1"
CPPFLAGS="-I/dev/env/WATT_ROOT/inc"
LDFLAGS="-L/dev/env/WATT_ROOT/lib"
- LIBS="$LIBS -lwatt"
+ LIBS="-lwatt $LIBS"
])
fi
if test "$HAVE_GETHOSTBYNAME" != "1"
then
dnl This is for winsock systems
- if test "$ac_cv_header_windows_h" = "yes"; then
- if test "$ac_cv_header_winsock_h" = "yes"; then
+ if test "$curl_cv_header_windows_h" = "yes"; then
+ if test "$curl_cv_header_winsock_h" = "yes"; then
case $host in
*-*-mingw32ce*)
winsock_LIB="-lwinsock"
;;
esac
fi
- if test "$ac_cv_header_winsock2_h" = "yes"; then
+ if test "$curl_cv_header_winsock2_h" = "yes"; then
winsock_LIB="-lws2_32"
fi
if test ! -z "$winsock_LIB"; then
dnl gethostbyname in the network lib - for Haiku OS
AC_CHECK_LIB(network, gethostbyname,
[HAVE_GETHOSTBYNAME="1"
- LIBS="$LIBS -lnetwork"
+ LIBS="-lnetwork $LIBS"
])
fi
dnl gethostbyname in the net lib - for BeOS
AC_CHECK_LIB(net, gethostbyname,
[HAVE_GETHOSTBYNAME="1"
- LIBS="$LIBS -lnet"
+ LIBS="-lnet $LIBS"
])
fi
AC_MSG_ERROR([couldn't find libraries for gethostbyname()])
fi
-dnl resolve lib?
-AC_CHECK_FUNC(strcasecmp, , [ AC_CHECK_LIB(resolve, strcasecmp) ])
-
-if test "$ac_cv_lib_resolve_strcasecmp" = "$ac_cv_func_strcasecmp"; then
- AC_CHECK_LIB(resolve, strcasecmp,
- [LIBS="-lresolve $LIBS"],
- ,
- -lnsl)
-fi
-ac_cv_func_strcasecmp="no"
-
CURL_CHECK_LIBS_CONNECT
CURL_NETWORK_LIBS=$LIBS
dnl **********************************************************************
dnl The preceding library checks are all potentially useful for test
-dnl servers (for providing networking support). Save the list of required
-dnl libraries at this point for use while linking those test servers.
+dnl servers and libtest cases which require networking and clock_gettime
+dnl support. Save the list of required libraries at this point for use
+dnl while linking those test servers and programs.
dnl **********************************************************************
-TEST_SERVER_LIBS=$LIBS
+CURL_NETWORK_AND_TIME_LIBS=$LIBS
dnl **********************************************************************
-AC_MSG_CHECKING([whether to use libgcc])
-AC_ARG_ENABLE(libgcc,
-AC_HELP_STRING([--enable-libgcc],[use libgcc when linking]),
-[ case "$enableval" in
- yes)
- ALL_LIBS="$ALL_LIBS -lgcc"
- AC_MSG_RESULT(yes)
- ;;
- *) AC_MSG_RESULT(no)
- ;;
- esac ],
- AC_MSG_RESULT(no)
-)
+dnl Check for the presence of ZLIB libraries and headers
+dnl **********************************************************************
+
+dnl Check for & handle argument to --with-zlib.
+
+clean_CPPFLAGS=$CPPFLAGS
+clean_LDFLAGS=$LDFLAGS
+clean_LIBS=$LIBS
+ZLIB_LIBS=""
+AC_ARG_WITH(zlib,
+AC_HELP_STRING([--with-zlib=PATH],[search for zlib in PATH])
+AC_HELP_STRING([--without-zlib],[disable use of zlib]),
+ [OPT_ZLIB="$withval"])
+
+if test "$OPT_ZLIB" = "no" ; then
+ AC_MSG_WARN([zlib disabled])
+else
+ if test "$OPT_ZLIB" = "yes" ; then
+ OPT_ZLIB=""
+ fi
+
+ CURL_CHECK_PKGCONFIG(zlib)
+
+ if test "$PKGCONFIG" != "no" ; then
+ LIBS="`$PKGCONFIG --libs-only-l zlib` $LIBS"
+ LDFLAGS="`$PKGCONFIG --libs-only-L zlib` $LDFLAGS"
+ CPPFLAGS="`$PKGCONFIG --cflags-only-I zlib` $CPPFLAGS"
+ OPT_ZLIB=""
+ HAVE_LIBZ="1"
+ fi
+
+ if test -z "$OPT_ZLIB" ; then
+
+ if test -z "$HAVE_LIBZ"; then
+
+ dnl Check for the lib without setting any new path, since many
+ dnl people have it in the default path
+
+ AC_CHECK_LIB(z, inflateEnd,
+ dnl libz found, set the variable
+ [HAVE_LIBZ="1"
+ LIBS="-lz $LIBS"],
+ dnl if no lib found, try /usr/local
+ [OPT_ZLIB="/usr/local"])
+ fi
+ fi
+
+ dnl Add a nonempty path to the compiler flags
+ if test -n "$OPT_ZLIB"; then
+ CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
+ LDFLAGS="$LDFLAGS -L$OPT_ZLIB/lib$libsuff"
+ fi
+
+ AC_CHECK_HEADER(zlib.h,
+ [
+ dnl zlib.h was found
+ HAVE_ZLIB_H="1"
+ dnl if the lib wasn't found already, try again with the new paths
+ if test "$HAVE_LIBZ" != "1"; then
+ AC_CHECK_LIB(z, gzread,
+ [
+ dnl the lib was found!
+ HAVE_LIBZ="1"
+ LIBS="-lz $LIBS"
+ ],
+ [ CPPFLAGS=$clean_CPPFLAGS
+ LDFLAGS=$clean_LDFLAGS])
+ fi
+ ],
+ [
+ dnl zlib.h was not found, restore the flags
+ CPPFLAGS=$clean_CPPFLAGS
+ LDFLAGS=$clean_LDFLAGS]
+ )
+
+ if test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" != "1"
+ then
+ AC_MSG_WARN([configure found only the libz lib, not the header file!])
+ HAVE_LIBZ=""
+ CPPFLAGS=$clean_CPPFLAGS
+ LDFLAGS=$clean_LDFLAGS
+ LIBS=$clean_LIBS
+ elif test "$HAVE_LIBZ" != "1" && test "$HAVE_ZLIB_H" = "1"
+ then
+ AC_MSG_WARN([configure found only the libz header file, not the lib!])
+ CPPFLAGS=$clean_CPPFLAGS
+ LDFLAGS=$clean_LDFLAGS
+ LIBS=$clean_LIBS
+ elif test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" = "1"
+ then
+ dnl both header and lib were found!
+ AC_SUBST(HAVE_LIBZ)
+ AC_DEFINE(HAVE_ZLIB_H, 1, [if you have the zlib.h header file])
+ AC_DEFINE(HAVE_LIBZ, 1, [if zlib is available])
+
+ ZLIB_LIBS="-lz"
+ LIBS="-lz $clean_LIBS"
+
+ dnl replace 'HAVE_LIBZ' in the automake makefile.ams
+ AMFIXLIB="1"
+ AC_MSG_NOTICE([found both libz and libz.h header])
+ curl_zlib_msg="enabled"
+ fi
+fi
+
+dnl set variable for use in automakefile(s)
+AM_CONDITIONAL(HAVE_LIBZ, test x"$AMFIXLIB" = x1)
+AC_SUBST(ZLIB_LIBS)
dnl **********************************************************************
dnl Check for LDAP
CURL_CHECK_HEADER_LDAP_SSL
if test -z "$LDAPLIBNAME" ; then
- if test "$ac_cv_native_windows" = "yes"; then
+ if test "$curl_cv_native_windows" = "yes"; then
dnl Windows uses a single and unique LDAP library name
LDAPLIBNAME="wldap32"
LBERLIBNAME="no"
AC_CHECK_LIB("$LDAPLIBNAME", ldap_init,, [
AC_MSG_WARN(["$LDAPLIBNAME" is not an LDAP library: LDAP disabled])
AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
- AC_SUBST(CURL_DISABLE_LDAP, [1])])
+ AC_SUBST(CURL_DISABLE_LDAP, [1])
AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
- AC_SUBST(CURL_DISABLE_LDAPS, [1])
+ AC_SUBST(CURL_DISABLE_LDAPS, [1])])
else
dnl Try to find the right ldap libraries for this system
CURL_CHECK_LIBS_LDAP
AC_CHECK_LIB("$LBERLIBNAME", ber_free,, [
AC_MSG_WARN(["$LBERLIBNAME" is not an LBER library: LDAP disabled])
AC_DEFINE(CURL_DISABLE_LDAP, 1, [to disable LDAP])
- AC_SUBST(CURL_DISABLE_LDAP, [1])])
+ AC_SUBST(CURL_DISABLE_LDAP, [1])
AC_DEFINE(CURL_DISABLE_LDAPS, 1, [to disable LDAPS])
- AC_SUBST(CURL_DISABLE_LDAPS, [1])
+ AC_SUBST(CURL_DISABLE_LDAPS, [1])])
fi
fi
fi
if test "$LDAPLIBNAME" = "wldap32"; then
curl_ldap_msg="enabled (winldap)"
- AC_DEFINE(CURL_LDAP_WIN, 1, [Use Windows LDAP implementation])
+ AC_DEFINE(USE_WIN32_LDAP, 1, [Use Windows LDAP implementation])
else
curl_ldap_msg="enabled (OpenLDAP)"
if test "x$ac_cv_func_ldap_init_fd" = "xyes"; then
dnl Checks for IPv6
dnl **********************************************************************
-AC_MSG_CHECKING([whether to enable ipv6])
+AC_MSG_CHECKING([whether to enable IPv6])
AC_ARG_ENABLE(ipv6,
-AC_HELP_STRING([--enable-ipv6],[Enable ipv6 (with ipv4) support])
-AC_HELP_STRING([--disable-ipv6],[Disable ipv6 support]),
+AC_HELP_STRING([--enable-ipv6],[Enable IPv6 (with IPv4) support])
+AC_HELP_STRING([--disable-ipv6],[Disable IPv6 support]),
[ case "$enableval" in
no)
AC_MSG_RESULT(no)
AC_TRY_RUN([ /* is AF_INET6 available? */
#include <sys/types.h>
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
+#else
#include <sys/socket.h>
+#endif
+#include <stdlib.h> /* for exit() */
main()
{
if (socket(AF_INET6, SOCK_STREAM, 0) < 0)
ipv6=yes,
AC_MSG_RESULT(no)
ipv6=no,
- AC_MSG_RESULT(no)
- ipv6=no
+ AC_MSG_RESULT(yes)
+ ipv6=yes
))
if test "$ipv6" = "yes"; then
AC_MSG_CHECKING([if struct sockaddr_in6 has sin6_scope_id member])
AC_TRY_COMPILE([
#include <sys/types.h>
-#include <netinet/in.h>] ,
+#ifdef HAVE_WINSOCK2_H
+#include <winsock2.h>
+#include <ws2tcpip.h>
+#else
+#include <netinet/in.h>
+#endif] ,
struct sockaddr_in6 s; s.sin6_scope_id = 0; , have_sin6_scope_id=yes)
if test "$have_sin6_scope_id" = yes; then
AC_MSG_RESULT([yes])
esac
dnl **********************************************************************
-dnl Check for the presence of Kerberos4 libraries and headers
-dnl **********************************************************************
-
-AC_ARG_WITH(krb4-includes,
-AC_HELP_STRING([--with-krb4-includes=DIR],
- [Specify location of kerberos4 headers]),[
- CPPFLAGS="$CPPFLAGS -I$withval"
- KRB4INC="$withval"
- want_krb4=yes
- ])
-
-AC_ARG_WITH(krb4-libs,
-AC_HELP_STRING([--with-krb4-libs=DIR],[Specify location of kerberos4 libs]),[
- LDFLAGS="$LDFLAGS -L$withval"
- KRB4LIB="$withval"
- want_krb4=yes
- ])
-
-
-OPT_KRB4=off
-AC_ARG_WITH(krb4,dnl
-AC_HELP_STRING([--with-krb4=DIR],[where to look for Kerberos4]),[
- OPT_KRB4="$withval"
- if test X"$OPT_KRB4" != Xno; then
- want_krb4="yes"
- if test X"$OPT_KRB4" != Xyes; then
- LDFLAGS="$LDFLAGS -L$OPT_KRB4/lib$libsuff"
- KRB4LIB="$OPT_KRB4/lib$libsuff"
- CPPFLAGS="$CPPFLAGS -I$OPT_KRB4/include"
- KRB4INC="$OPT_KRB4/include"
- fi
- fi
- ])
-
-AC_MSG_CHECKING([if Kerberos4 support is requested])
-
-if test "$want_krb4" = yes
-then
- if test "$ipv6" = "yes"; then
- echo krb4 is not compatible with IPv6
- exit 1
- fi
- AC_MSG_RESULT(yes)
-
- dnl Check for & handle argument to --with-krb4
-
- AC_MSG_CHECKING(where to look for Kerberos4)
- if test X"$OPT_KRB4" = Xyes
- then
- AC_MSG_RESULT([defaults])
- else
- AC_MSG_RESULT([libs in $KRB4LIB, headers in $KRB4INC])
- fi
-
- dnl Check for DES library
- AC_CHECK_LIB(des, des_pcbc_encrypt,
- [
- AC_CHECK_HEADERS(des.h)
-
- dnl resolv lib?
- AC_CHECK_FUNC(res_search, , [AC_CHECK_LIB(resolv, res_search)])
-
- dnl Check for the Kerberos4 library
- AC_CHECK_LIB(krb, krb_net_read,
- [
- dnl Check for header files
- AC_CHECK_HEADERS(krb.h)
-
- dnl we found the required libraries, add to LIBS
- LIBS="-lkrb -lcom_err -ldes $LIBS"
-
- dnl Check for function krb_get_our_ip_for_realm
- dnl this is needed for NAT networks
- AC_CHECK_FUNCS(krb_get_our_ip_for_realm)
-
- dnl add define KRB4
- AC_DEFINE(HAVE_KRB4, 1,
- [if you have the Kerberos4 libraries (including -ldes)])
-
- dnl substitute it too!
- KRB4_ENABLED=1
- AC_SUBST(KRB4_ENABLED)
-
- curl_krb4_msg="enabled"
-
- dnl the krb4 stuff needs a strlcpy()
- AC_CHECK_FUNCS(strlcpy)
-
- ])
- ])
-else
- AC_MSG_RESULT(no)
-fi
-
-dnl **********************************************************************
-dnl Check for FBopenssl(SPNEGO) libraries
-dnl **********************************************************************
-
-AC_ARG_WITH(spnego,
- AC_HELP_STRING([--with-spnego=DIR],
- [Specify location of SPNEGO library fbopenssl]), [
- SPNEGO_ROOT="$withval"
- if test x"$SPNEGO_ROOT" != xno; then
- want_spnego="yes"
- fi
-])
-
-AC_MSG_CHECKING([if SPNEGO support is requested])
-if test x"$want_spnego" = xyes; then
-
- if test X"$SPNEGO_ROOT" = Xyes; then
- AC_MSG_ERROR([FBOpenSSL libs and/or directories were not found where specified!])
- AC_MSG_RESULT(no)
- else
- if test -z "$SPNEGO_LIB_DIR"; then
- LDFLAGS="$LDFLAGS -L$SPNEGO_ROOT -lfbopenssl"
- else
- LDFLAGS="$LDFLAGS $SPNEGO_LIB_DIR"
- fi
-
- AC_MSG_RESULT(yes)
- AC_DEFINE(HAVE_SPNEGO, 1,
- [Define this if you have the SPNEGO library fbopenssl])
- curl_spnego_msg="enabled"
- fi
-else
- AC_MSG_RESULT(no)
-fi
-
-dnl **********************************************************************
dnl Check for GSS-API libraries
dnl **********************************************************************
-dnl check for gss stuff in the /usr as default
+dnl check for GSS-API stuff in the /usr as default
GSSAPI_ROOT="/usr"
AC_ARG_WITH(gssapi-includes,
AC_HELP_STRING([--with-gssapi-includes=DIR],
- [Specify location of GSSAPI header]),
+ [Specify location of GSS-API headers]),
[ GSSAPI_INCS="-I$withval"
want_gss="yes" ]
)
AC_ARG_WITH(gssapi-libs,
AC_HELP_STRING([--with-gssapi-libs=DIR],
- [Specify location of GSSAPI libs]),
+ [Specify location of GSS-API libs]),
[ GSSAPI_LIB_DIR="-L$withval"
want_gss="yes" ]
)
AC_ARG_WITH(gssapi,
AC_HELP_STRING([--with-gssapi=DIR],
- [Where to look for GSSAPI]), [
+ [Where to look for GSS-API]), [
GSSAPI_ROOT="$withval"
if test x"$GSSAPI_ROOT" != xno; then
want_gss="yes"
fi
])
+: ${KRB5CONFIG:="$GSSAPI_ROOT/bin/krb5-config"}
+
save_CPPFLAGS="$CPPFLAGS"
-AC_MSG_CHECKING([if GSSAPI support is requested])
+AC_MSG_CHECKING([if GSS-API support is requested])
if test x"$want_gss" = xyes; then
AC_MSG_RESULT(yes)
if test -z "$GSSAPI_INCS"; then
- if test -f "$GSSAPI_ROOT/bin/krb5-config"; then
- GSSAPI_INCS=`$GSSAPI_ROOT/bin/krb5-config --cflags gssapi`
+ if test -n "$host_alias" -a -f "$GSSAPI_ROOT/bin/$host_alias-krb5-config"; then
+ GSSAPI_INCS=`$GSSAPI_ROOT/bin/$host_alias-krb5-config --cflags gssapi`
+ elif test -f "$KRB5CONFIG"; then
+ GSSAPI_INCS=`$KRB5CONFIG --cflags gssapi`
elif test "$GSSAPI_ROOT" != "yes"; then
GSSAPI_INCS="-I$GSSAPI_ROOT/include"
fi
AC_CHECK_HEADER(gss.h,
[
dnl found in the given dirs
- AC_DEFINE(HAVE_GSSGNU, 1, [if you have the GNU gssapi libraries])
+ AC_DEFINE(HAVE_GSSGNU, 1, [if you have GNU GSS])
gnu_gss=yes
],
[
AC_CHECK_HEADER(gssapi.h,
[
dnl found
- AC_DEFINE(HAVE_GSSHEIMDAL, 1, [if you have the Heimdal gssapi libraries])
+ AC_DEFINE(HAVE_GSSHEIMDAL, 1, [if you have Heimdal])
],
[
dnl no header found, disabling GSS
want_gss=no
- AC_MSG_WARN(disabling GSSAPI since no header files was found)
+ AC_MSG_WARN(disabling GSS-API support since no header files were found)
]
)
else
dnl MIT found
- AC_DEFINE(HAVE_GSSMIT, 1, [if you have the MIT gssapi libraries])
- dnl check if we have a really old MIT kerberos (<= 1.2)
- AC_MSG_CHECKING([if gssapi headers declare GSS_C_NT_HOSTBASED_SERVICE])
+ AC_DEFINE(HAVE_GSSMIT, 1, [if you have MIT Kerberos])
+ dnl check if we have a really old MIT Kerberos version (<= 1.2)
+ AC_MSG_CHECKING([if GSS-API headers declare GSS_C_NT_HOSTBASED_SERVICE])
AC_COMPILE_IFELSE([
AC_LANG_PROGRAM([[
#include <gssapi/gssapi.h>
],[
AC_MSG_RESULT([no])
AC_DEFINE(HAVE_OLD_GSSMIT, 1,
- [if you have an old MIT gssapi library, lacking GSS_C_NT_HOSTBASED_SERVICE])
+ [if you have an old MIT Kerberos version, lacking GSS_C_NT_HOSTBASED_SERVICE])
])
fi
]
AC_MSG_RESULT(no)
fi
if test x"$want_gss" = xyes; then
- AC_DEFINE(HAVE_GSSAPI, 1, [if you have the gssapi libraries])
-
- curl_gss_msg="enabled (MIT/Heimdal)"
+ AC_DEFINE(HAVE_GSSAPI, 1, [if you have GSS-API libraries])
+ HAVE_GSSAPI=1
+ curl_gss_msg="enabled (MIT Kerberos/Heimdal)"
if test -n "$gnu_gss"; then
curl_gss_msg="enabled (GNU GSS)"
LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR"
- LIBS="$LIBS -lgss"
+ LIBS="-lgss $LIBS"
elif test -z "$GSSAPI_LIB_DIR"; then
case $host in
*-*-darwin*)
- LIBS="$LIBS -lgssapi_krb5 -lresolv"
+ LIBS="-lgssapi_krb5 -lresolv $LIBS"
;;
*)
- if test -f "$GSSAPI_ROOT/bin/krb5-config"; then
+ if test -n "$host_alias" -a -f "$GSSAPI_ROOT/bin/$host_alias-krb5-config"; then
+ dnl krb5-config doesn't have --libs-only-L or similar, put everything
+ dnl into LIBS
+ gss_libs=`$GSSAPI_ROOT/bin/$host_alias-krb5-config --libs gssapi`
+ LIBS="$gss_libs $LIBS"
+ elif test -f "$KRB5CONFIG"; then
dnl krb5-config doesn't have --libs-only-L or similar, put everything
dnl into LIBS
- gss_libs=`$GSSAPI_ROOT/bin/krb5-config --libs gssapi`
- LIBS="$LIBS $gss_libs"
- elif test "$GSSAPI_ROOT" != "yes"; then
- LDFLAGS="$LDFLAGS -L$GSSAPI_ROOT/lib$libsuff"
- LIBS="$LIBS -lgssapi"
+ gss_libs=`$KRB5CONFIG --libs gssapi`
+ LIBS="$gss_libs $LIBS"
else
- LIBS="$LIBS -lgssapi"
+ case $host in
+ *-hp-hpux*)
+ gss_libname="gss"
+ ;;
+ *)
+ gss_libname="gssapi"
+ ;;
+ esac
+
+ if test "$GSSAPI_ROOT" != "yes"; then
+ LDFLAGS="$LDFLAGS -L$GSSAPI_ROOT/lib$libsuff"
+ LIBS="-l$gss_libname $LIBS"
+ else
+ LIBS="-l$gss_libname $LIBS"
+ fi
fi
;;
esac
else
LDFLAGS="$LDFLAGS $GSSAPI_LIB_DIR"
- LIBS="$LIBS -lgssapi"
+ case $host in
+ *-hp-hpux*)
+ LIBS="-lgss $LIBS"
+ ;;
+ *)
+ LIBS="-lgssapi $LIBS"
+ ;;
+ esac
fi
else
CPPFLAGS="$save_CPPFLAGS"
fi
+dnl -------------------------------------------------
+dnl check winssl option before other SSL libraries
+dnl -------------------------------------------------
+
+OPT_WINSSL=no
+AC_ARG_WITH(winssl,dnl
+AC_HELP_STRING([--with-winssl],[enable Windows native SSL/TLS])
+AC_HELP_STRING([--without-winssl], [disable Windows native SSL/TLS]),
+ OPT_WINSSL=$withval)
+
+AC_MSG_CHECKING([whether to enable Windows native SSL/TLS (Windows native builds only)])
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
+ if test "x$OPT_WINSSL" != "xno" &&
+ test "x$curl_cv_native_windows" = "xyes"; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(USE_SCHANNEL, 1, [to enable Windows native SSL/TLS support])
+ AC_SUBST(USE_SCHANNEL, [1])
+ curl_ssl_msg="enabled (Windows-native)"
+ WINSSL_ENABLED=1
+ # --with-winssl implies --enable-sspi
+ AC_DEFINE(USE_WINDOWS_SSPI, 1, [to enable SSPI support])
+ AC_SUBST(USE_WINDOWS_SSPI, [1])
+ curl_sspi_msg="enabled"
+ LIBS="-lcrypt32 $LIBS"
+ else
+ AC_MSG_RESULT(no)
+ fi
+else
+ AC_MSG_RESULT(no)
+fi
+
+OPT_DARWINSSL=no
+AC_ARG_WITH(darwinssl,dnl
+AC_HELP_STRING([--with-darwinssl],[enable iOS/Mac OS X native SSL/TLS])
+AC_HELP_STRING([--without-darwinssl], [disable iOS/Mac OS X native SSL/TLS]),
+ OPT_DARWINSSL=$withval)
+
+AC_MSG_CHECKING([whether to enable iOS/Mac OS X native SSL/TLS])
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
+ if test "x$OPT_DARWINSSL" != "xno" &&
+ test -d "/System/Library/Frameworks/Security.framework"; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(USE_DARWINSSL, 1, [to enable iOS/Mac OS X native SSL/TLS support])
+ AC_SUBST(USE_DARWINSSL, [1])
+ curl_ssl_msg="enabled (iOS/Mac OS X-native)"
+ DARWINSSL_ENABLED=1
+ LDFLAGS="$LDFLAGS -framework CoreFoundation -framework Security"
+ else
+ AC_MSG_RESULT(no)
+ fi
+else
+ AC_MSG_RESULT(no)
+fi
+
dnl **********************************************************************
dnl Check for the presence of SSL libraries and headers
dnl **********************************************************************
AC_HELP_STRING([--without-ssl], [disable OpenSSL]),
OPT_SSL=$withval)
-if test X"$OPT_SSL" != Xno; then
+if test "$curl_ssl_msg" = "$init_ssl_msg" && test X"$OPT_SSL" != Xno; then
dnl backup the pre-ssl variables
CLEANLDFLAGS="$LDFLAGS"
CLEANCPPFLAGS="$CPPFLAGS"
CLEANLIBS="$LIBS"
+ dnl This is for Msys/Mingw
+ case $host in
+ *-*-msys* | *-*-mingw*)
+ AC_MSG_CHECKING([for gdi32])
+ my_ac_save_LIBS=$LIBS
+ LIBS="-lgdi32 $LIBS"
+ AC_TRY_LINK([#include <windef.h>
+ #include <wingdi.h>],
+ [GdiFlush();],
+ [ dnl worked!
+ AC_MSG_RESULT([yes])],
+ [ dnl failed, restore LIBS
+ LIBS=$my_ac_save_LIBS
+ AC_MSG_RESULT(no)]
+ )
+ ;;
+ esac
+
case "$OPT_SSL" in
yes)
dnl --with-ssl (without path) used
SSL_CPPFLAGS=`CURL_EXPORT_PCDIR([$OPENSSL_PCDIR]) dnl
$PKGCONFIG --cflags-only-I openssl 2>/dev/null`
+ AC_SUBST(SSL_LIBS)
AC_MSG_NOTICE([pkg-config: SSL_LIBS: "$SSL_LIBS"])
AC_MSG_NOTICE([pkg-config: SSL_LDFLAGS: "$SSL_LDFLAGS"])
AC_MSG_NOTICE([pkg-config: SSL_CPPFLAGS: "$SSL_CPPFLAGS"])
dnl the argument to --with-ssl we don't know what
dnl additional libs may be necessary. Hope that we
dnl don't need any.
- LIBS="$LIBS $SSL_LIBS"
+ LIBS="$SSL_LIBS $LIBS"
fi
fi
CPPFLAGS="$CPPFLAGS $SSL_CPPFLAGS"
LDFLAGS="$LDFLAGS $SSL_LDFLAGS"
- dnl This is for Msys/Mingw
- case $host in
- *-*-msys* | *-*-mingw*)
- AC_MSG_CHECKING([for gdi32])
- my_ac_save_LIBS=$LIBS
- LIBS="-lgdi32 $LIBS"
- AC_TRY_LINK([#include <windef.h>
- #include <wingdi.h>],
- [GdiFlush();],
- [ dnl worked!
- AC_MSG_RESULT([yes])],
- [ dnl failed, restore LIBS
- LIBS=$my_ac_save_LIBS
- AC_MSG_RESULT(no)]
- )
- ;;
- esac
-
- AC_CHECK_LIB(crypto, CRYPTO_lock,[
+ AC_CHECK_LIB(crypto, HMAC_Update,[
HAVECRYPTO="yes"
LIBS="-lcrypto $LIBS"
],[
LDFLAGS="$CLEANLDFLAGS -L$LIB_OPENSSL"
CPPFLAGS="$CLEANCPPFLAGS -I$PREFIX_OPENSSL/include/openssl -I$PREFIX_OPENSSL/include"
- AC_CHECK_LIB(crypto, CRYPTO_add_lock,[
+ AC_CHECK_LIB(crypto, HMAC_Init_ex,[
HAVECRYPTO="yes"
LIBS="-lcrypto $LIBS"], [
LDFLAGS="$CLEANLDFLAGS"
if test X"$HAVECRYPTO" = X"yes"; then
+ AC_MSG_CHECKING([OpenSSL linking without -ldl])
+ saved_libs=$LIBS
+ AC_TRY_LINK(
+ [
+ #include <openssl/evp.h>
+ ],
+ [
+ SSLeay_add_all_algorithms();
+ ],
+ [
+ AC_MSG_RESULT(yes)
+ LIBS="$saved_libs"
+ ],
+ [
+ AC_MSG_RESULT(no)
+ AC_MSG_CHECKING([OpenSSL linking with -ldl])
+ LIBS="-ldl $LIBS"
+ AC_TRY_LINK(
+ [
+ #include <openssl/evp.h>
+ ],
+ [
+ SSLeay_add_all_algorithms();
+ ],
+ [
+ AC_MSG_RESULT(yes)
+ LIBS="$saved_libs -ldl"
+ ],
+ [
+ AC_MSG_RESULT(no)
+ LIBS="$saved_libs"
+ ]
+ )
+
+ ]
+ )
+
+ fi
+
+ if test X"$HAVECRYPTO" = X"yes"; then
dnl This is only reasonable to do if crypto actually is there: check for
dnl SSL libs NOTE: it is important to do this AFTER the crypto lib
dnl we didn't find the SSL lib, try the RSAglue/rsaref stuff
AC_MSG_CHECKING(for ssl with RSAglue/rsaref libs in use);
OLIBS=$LIBS
- LIBS="$LIBS -lRSAglue -lrsaref"
+ LIBS="-lRSAglue -lrsaref $LIBS"
AC_CHECK_LIB(ssl, SSL_connect)
if test "$ac_cv_lib_ssl_SSL_connect" != yes; then
dnl still no SSL_connect
else
- dnl Have the libraries--check for SSLeay/OpenSSL headers
+ dnl Have the libraries--check for OpenSSL headers
AC_CHECK_HEADERS(openssl/x509.h openssl/rsa.h openssl/crypto.h \
openssl/pem.h openssl/ssl.h openssl/err.h,
curl_ssl_msg="enabled (OpenSSL)"
fi
if test X"$OPENSSL_ENABLED" = X"1"; then
- AC_DEFINE(USE_SSLEAY, 1, [if SSL is enabled])
-
dnl is there a pkcs12.h header present?
AC_CHECK_HEADERS(openssl/pkcs12.h)
else
LIBS="$CLEANLIBS"
fi
- dnl USE_SSLEAY is the historical name for what configure calls
- dnl OPENSSL_ENABLED; the names should really be unified
- USE_SSLEAY="$OPENSSL_ENABLED"
- AC_SUBST(USE_SSLEAY)
if test X"$OPT_SSL" != Xoff &&
test "$OPENSSL_ENABLED" != "1"; then
AC_CHECK_FUNCS( ENGINE_load_builtin_engines )
])
- dnl these can only exist if openssl exists
- dnl yassl doesn't have SSL_get_shutdown
+ dnl These can only exist if OpenSSL exists
+ dnl Older versions of Cyassl (some time before 2.9.4) don't have
+ dnl SSL_get_shutdown (but this check won't actually detect it there
+ dnl as it's a macro that needs the header files be included)
AC_CHECK_FUNCS( RAND_status \
RAND_screen \
SSL_get_shutdown \
SSLv2_client_method )
- dnl Make an attempt to detect if this is actually yassl's headers and
- dnl OpenSSL emulation layer. We still leave everything else believing
- dnl and acting like OpenSSL.
+ AC_MSG_CHECKING([for BoringSSL])
+ AC_COMPILE_IFELSE([
+ AC_LANG_PROGRAM([[
+ #include <openssl/base.h>
+ ]],[[
+ #ifndef OPENSSL_IS_BORINGSSL
+ #error not boringssl
+ #endif
+ ]])
+ ],[
+ AC_MSG_RESULT([yes])
+ AC_DEFINE_UNQUOTED(HAVE_BORINGSSL, 1,
+ [Define to 1 if using BoringSSL.])
+ curl_ssl_msg="enabled (BoringSSL)"
+ ],[
+ AC_MSG_RESULT([no])
+ ])
- AC_MSG_CHECKING([for yaSSL using OpenSSL compatibility mode])
+ AC_MSG_CHECKING([for libressl])
AC_COMPILE_IFELSE([
AC_LANG_PROGRAM([[
-#include <openssl/ssl.h>
+#include <openssl/opensslv.h>
]],[[
-#if defined(YASSL_VERSION) && defined(OPENSSL_VERSION_NUMBER)
- int dummy = SSL_ERROR_NONE;
-#else
- Not the yaSSL OpenSSL compatibility header.
-#endif
+ int dummy = LIBRESSL_VERSION_NUMBER;
]])
],[
AC_MSG_RESULT([yes])
- AC_DEFINE_UNQUOTED(USE_YASSLEMUL, 1,
- [Define to 1 if using yaSSL in OpenSSL compatibility mode.])
- curl_ssl_msg="enabled (OpenSSL emulation by yaSSL)"
+ AC_DEFINE_UNQUOTED(HAVE_LIBRESSL, 1,
+ [Define to 1 if using libressl.])
+ curl_ssl_msg="enabled (libressl)"
],[
AC_MSG_RESULT([no])
])
fi
dnl **********************************************************************
-dnl Check for the presence of ZLIB libraries and headers
-dnl **********************************************************************
-
-dnl Check for & handle argument to --with-zlib.
-
-_cppflags=$CPPFLAGS
-_ldflags=$LDFLAGS
-AC_ARG_WITH(zlib,
-AC_HELP_STRING([--with-zlib=PATH],[search for zlib in PATH])
-AC_HELP_STRING([--without-zlib],[disable use of zlib]),
- [OPT_ZLIB="$withval"])
-
-if test "$OPT_ZLIB" = "no" ; then
- AC_MSG_WARN([zlib disabled])
-else
- if test "$OPT_ZLIB" = "yes" ; then
- OPT_ZLIB=""
- fi
-
- if test -z "$OPT_ZLIB" ; then
- dnl check for the lib first without setting any new path, since many
- dnl people have it in the default path
-
- AC_CHECK_LIB(z, inflateEnd,
- dnl libz found, set the variable
- [HAVE_LIBZ="1"],
- dnl if no lib found, try /usr/local
- [OPT_ZLIB="/usr/local"])
-
- fi
-
- dnl Add a nonempty path to the compiler flags
- if test -n "$OPT_ZLIB"; then
- CPPFLAGS="$CPPFLAGS -I$OPT_ZLIB/include"
- LDFLAGS="$LDFLAGS -L$OPT_ZLIB/lib$libsuff"
- fi
-
- AC_CHECK_HEADER(zlib.h,
- [
- dnl zlib.h was found
- HAVE_ZLIB_H="1"
- dnl if the lib wasn't found already, try again with the new paths
- if test "$HAVE_LIBZ" != "1"; then
- AC_CHECK_LIB(z, gzread,
- [
- dnl the lib was found!
- HAVE_LIBZ="1"
- ],
- [ CPPFLAGS=$_cppflags
- LDFLAGS=$_ldflags])
- fi
- ],
- [
- dnl zlib.h was not found, restore the flags
- CPPFLAGS=$_cppflags
- LDFLAGS=$_ldflags]
- )
-
- if test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" != "1"
- then
- AC_MSG_WARN([configure found only the libz lib, not the header file!])
- HAVE_LIBZ=""
- elif test "$HAVE_LIBZ" != "1" && test "$HAVE_ZLIB_H" = "1"
- then
- AC_MSG_WARN([configure found only the libz header file, not the lib!])
- elif test "$HAVE_LIBZ" = "1" && test "$HAVE_ZLIB_H" = "1"
- then
- dnl both header and lib were found!
- AC_SUBST(HAVE_LIBZ)
- AC_DEFINE(HAVE_ZLIB_H, 1, [if you have the zlib.h header file])
- AC_DEFINE(HAVE_LIBZ, 1, [if zlib is available])
-
- CURL_LIBS="$CURL_LIBS -lz"
- LIBS="$LIBS -lz"
-
- dnl replace 'HAVE_LIBZ' in the automake makefile.ams
- AMFIXLIB="1"
- AC_MSG_NOTICE([found both libz and libz.h header])
- curl_zlib_msg="enabled"
- fi
-fi
-
-dnl set variable for use in automakefile(s)
-AM_CONDITIONAL(HAVE_LIBZ, test x"$AMFIXLIB" = x1)
-
-dnl **********************************************************************
dnl Check for the random seed preferences
dnl **********************************************************************
if test "$OPENSSL_ENABLED" = "1"; then
AC_CHECK_LIB(crypto, SRP_Calc_client_key,
[
- AC_DEFINE(HAVE_SSLEAY_SRP, 1, [if you have the function SRP_Calc_client_key])
- AC_SUBST(HAVE_SSLEAY_SRP, [1])
+ AC_DEFINE(HAVE_OPENSSL_SRP, 1, [if you have the function SRP_Calc_client_key])
+ AC_SUBST(HAVE_OPENSSL_SRP, [1])
])
fi
AC_HELP_STRING([--without-gnutls], [disable GnuTLS detection]),
OPT_GNUTLS=$withval)
-if test "$OPENSSL_ENABLED" != "1"; then
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
if test X"$OPT_GNUTLS" != Xno; then
addld=""
+ addlib=""
+ gtlslib=""
+ version=""
+ addcflags=""
+
if test "x$OPT_GNUTLS" = "xyes"; then
dnl this is with no partiular path given
CURL_CHECK_PKGCONFIG(gnutls)
CLEANLIBS="$LIBS"
CLEANCPPFLAGS="$CPPFLAGS"
- CLEADLDFLAGS="$LDFLAGS"
+ CLEANLDFLAGS="$LDFLAGS"
- LIBS="$LIBS $addlib"
+ LIBS="$addlib $LIBS"
LDFLAGS="$LDFLAGS $addld"
if test "$addcflags" != "-I/usr/include"; then
CPPFLAGS="$CPPFLAGS $addcflags"
AC_MSG_NOTICE([Added $gtlslib to LD_LIBRARY_PATH])
fi
fi
+ AC_CHECK_FUNCS(gnutls_certificate_set_x509_key_file2)
fi
fi
fi dnl GNUTLS not disabled
-fi dnl OPENSSL != 1
+fi
dnl ---
dnl Check which crypto backend GnuTLS uses
if test "$USE_GNUTLS_NETTLE" = "1"; then
AC_DEFINE(USE_GNUTLS_NETTLE, 1, [if GnuTLS uses nettle as crypto backend])
AC_SUBST(USE_GNUTLS_NETTLE, [1])
- LIBS="$LIBS -lnettle"
+ LIBS="-lnettle $LIBS"
else
- LIBS="$LIBS -lgcrypt"
+ LIBS="-lgcrypt $LIBS"
fi
fi
AC_HELP_STRING([--without-polarssl], [disable PolarSSL detection]),
OPT_POLARSSL=$withval)
-if test "$OPENSSL_ENABLED" != "1"; then
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
if test X"$OPT_POLARSSL" != Xno; then
])
fi
+ addld=""
+ addlib=""
+ addcflags=""
+ polarssllib=""
+
if test "x$USE_POLARSSL" != "xyes"; then
dnl add the path and test again
addld=-L$OPT_POLARSSL/lib$libsuff
if test "x$USE_POLARSSL" = "xyes"; then
AC_MSG_NOTICE([detected PolarSSL])
- CURL_LIBS="$CURL_LIBS -lpolarssl"
- LIBS="$LIBS -lpolarssl"
+ LIBS="-lpolarssl $LIBS"
if test -n "$polarssllib"; then
dnl when shared libs were found in a path that the run-time
fi dnl PolarSSL not disabled
-fi dnl OPENSSL != 1
+fi
+
+dnl ----------------------------------------------------
+dnl check for mbedTLS
+dnl ----------------------------------------------------
+
+OPT_MBEDTLS=no
+
+_cppflags=$CPPFLAGS
+_ldflags=$LDFLAGS
+AC_ARG_WITH(mbedtls,dnl
+AC_HELP_STRING([--with-mbedtls=PATH],[where to look for mbedTLS, PATH points to the installation root])
+AC_HELP_STRING([--without-mbedtls], [disable mbedTLS detection]),
+ OPT_MBEDTLS=$withval)
+
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
+
+ if test X"$OPT_MBEDTLS" != Xno; then
+
+ if test "$OPT_MBEDTLS" = "yes"; then
+ OPT_MBEDTLS=""
+ fi
+
+ if test -z "$OPT_MBEDTLS" ; then
+ dnl check for lib first without setting any new path
+
+ AC_CHECK_LIB(mbedtls, mbedtls_havege_init,
+ dnl libmbedtls found, set the variable
+ [
+ AC_DEFINE(USE_MBEDTLS, 1, [if mbedTLS is enabled])
+ AC_SUBST(USE_MBEDTLS, [1])
+ MBEDTLS_ENABLED=1
+ USE_MBEDTLS="yes"
+ curl_ssl_msg="enabled (mbedTLS)"
+ ], [], -lmbedx509 -lmbedcrypto)
+ fi
+
+ addld=""
+ addlib=""
+ addcflags=""
+ mbedtlslib=""
+
+ if test "x$USE_MBEDTLS" != "xyes"; then
+ dnl add the path and test again
+ addld=-L$OPT_MBEDTLS/lib$libsuff
+ addcflags=-I$OPT_MBEDTLS/include
+ mbedtlslib=$OPT_MBEDTLS/lib$libsuff
+
+ LDFLAGS="$LDFLAGS $addld"
+ if test "$addcflags" != "-I/usr/include"; then
+ CPPFLAGS="$CPPFLAGS $addcflags"
+ fi
+
+ AC_CHECK_LIB(mbedtls, mbedtls_ssl_init,
+ [
+ AC_DEFINE(USE_MBEDTLS, 1, [if mbedTLS is enabled])
+ AC_SUBST(USE_MBEDTLS, [1])
+ MBEDTLS_ENABLED=1
+ USE_MBEDTLS="yes"
+ curl_ssl_msg="enabled (mbedTLS)"
+ ],
+ [
+ CPPFLAGS=$_cppflags
+ LDFLAGS=$_ldflags
+ ], -lmbedx509 -lmbedcrypto)
+ fi
+
+ if test "x$USE_MBEDTLS" = "xyes"; then
+ AC_MSG_NOTICE([detected mbedTLS])
+
+ LIBS="-lmbedtls -lmbedx509 -lmbedcrypto $LIBS"
+
+ if test -n "$mbedtlslib"; then
+ dnl when shared libs were found in a path that the run-time
+ dnl linker doesn't search through, we need to add it to
+ dnl LD_LIBRARY_PATH to prevent further configure tests to fail
+ dnl due to this
+ if test "x$cross_compiling" != "xyes"; then
+ LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$mbedtlslib"
+ export LD_LIBRARY_PATH
+ AC_MSG_NOTICE([Added $mbedtlslib to LD_LIBRARY_PATH])
+ fi
+ fi
+ fi
+
+ fi dnl mbedTLS not disabled
+
+fi
dnl ----------------------------------------------------
dnl check for CyaSSL
AC_HELP_STRING([--without-cyassl], [disable CyaSSL detection]),
OPT_CYASSL=$withval)
-if test "$OPENSSL_ENABLED" != "1"; then
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
if test X"$OPT_CYASSL" != Xno; then
OPT_CYASSL=""
fi
+ dnl This should be reworked to use pkg-config instead
+
+ cyassllibname=cyassl
+
if test -z "$OPT_CYASSL" ; then
dnl check for lib in system default first
])
fi
+ addld=""
+ addlib=""
+ addcflags=""
+ cyassllib=""
+
if test "x$USE_CYASSL" != "xyes"; then
dnl add the path and test again
addld=-L$OPT_CYASSL/lib$libsuff
[
CPPFLAGS=$_cppflags
LDFLAGS=$_ldflags
+ cyassllib=""
])
fi
+ addld=""
+ addlib=""
+ addcflags=""
+
+ if test "x$USE_CYASSL" != "xyes"; then
+ dnl libcyassl renamed to libwolfssl as of 3.4.0
+ addld=-L$OPT_CYASSL/lib$libsuff
+ addcflags=-I$OPT_CYASSL/include
+ cyassllib=$OPT_CYASSL/lib$libsuff
+
+ LDFLAGS="$LDFLAGS $addld"
+ if test "$addcflags" != "-I/usr/include"; then
+ CPPFLAGS="$CPPFLAGS $addcflags"
+ fi
+
+ cyassllibname=wolfssl
+ my_ac_save_LIBS="$LIBS"
+ LIBS="-l$cyassllibname -lm $LIBS"
+
+ AC_MSG_CHECKING([for CyaSSL_Init in -lwolfssl])
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([[
+/* These aren't needed for detection and confuse WolfSSL.
+ They are set up properly later if it is detected. */
+#undef SIZEOF_LONG
+#undef SIZEOF_LONG_LONG
+#include <cyassl/ssl.h>
+ ]],[[
+ return CyaSSL_Init();
+ ]])
+ ],[
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(USE_CYASSL, 1, [if CyaSSL/WolfSSL is enabled])
+ AC_SUBST(USE_CYASSL, [1])
+ CYASSL_ENABLED=1
+ USE_CYASSL="yes"
+ curl_ssl_msg="enabled (WolfSSL)"
+ ],
+ [
+ AC_MSG_RESULT(no)
+ CPPFLAGS=$_cppflags
+ LDFLAGS=$_ldflags
+ cyassllib=""
+ ])
+ LIBS="$my_ac_save_LIBS"
+ fi
+
if test "x$USE_CYASSL" = "xyes"; then
- AC_MSG_NOTICE([detected CyaSSL])
+ AC_MSG_NOTICE([detected $cyassllibname])
+
+ dnl cyassl/ctaocrypt/types.h needs SIZEOF_LONG_LONG defined!
+ AC_CHECK_SIZEOF(long long)
- CURL_LIBS="$CURL_LIBS -lcyassl -lm"
- LIBS="$LIBS -lcyassl -lm"
+ dnl Versions since at least 2.6.0 may have options.h
+ AC_CHECK_HEADERS(cyassl/options.h)
+
+ dnl Versions since at least 2.9.4 renamed error.h to error-ssl.h
+ AC_CHECK_HEADERS(cyassl/error-ssl.h)
+
+ LIBS="-l$cyassllibname -lm $LIBS"
+
+ if test "x$cyassllibname" = "xwolfssl"; then
+ dnl Recent WolfSSL versions build without SSLv3 by default
+ dnl WolfSSL needs configure --enable-opensslextra to have *get_peer*
+ AC_CHECK_FUNCS(wolfSSLv3_client_method \
+ wolfSSL_CTX_UseSupportedCurve \
+ wolfSSL_get_peer_certificate \
+ wolfSSL_UseALPN)
+ else
+ dnl Cyassl needs configure --enable-opensslextra to have *get_peer*
+ AC_CHECK_FUNCS(CyaSSL_CTX_UseSupportedCurve \
+ CyaSSL_get_peer_certificate)
+ fi
if test -n "$cyassllib"; then
dnl when shared libs were found in a path that the run-time
fi dnl CyaSSL not disabled
-fi dnl OPENSSL != 1
+fi
dnl ----------------------------------------------------
dnl NSS. Only check if GnuTLS and OpenSSL are not enabled
AC_HELP_STRING([--without-nss], [disable NSS detection]),
OPT_NSS=$withval)
-if test "$OPENSSL_ENABLED" != "1" -a "$GNUTLS_ENABLED" != "1"; then
+if test "$curl_ssl_msg" = "$init_ssl_msg"; then
if test X"$OPT_NSS" != Xno; then
+
+ addld=""
+ addlib=""
+ addcflags=""
+ nssprefix=""
+ version=""
+
if test "x$OPT_NSS" = "xyes"; then
CURL_CHECK_PKGCONFIG(nss)
fi
fi
else
- # Without pkg-config, we'll kludge in some defaults
- addlib="-L$OPT_NSS/lib -lssl3 -lsmime3 -lnss3 -lplds4 -lplc4 -lnspr4 -lpthread -ldl"
- addcflags="-I$OPT_NSS/include"
- version="unknown"
- nssprefix=$OPT_NSS
+ NSS_PCDIR="$OPT_NSS/lib/pkgconfig"
+ if test -f "$NSS_PCDIR/nss.pc"; then
+ CURL_CHECK_PKGCONFIG(nss, [$NSS_PCDIR])
+ if test "$PKGCONFIG" != "no" ; then
+ addld=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --libs-only-L nss`
+ addlib=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --libs-only-l nss`
+ addcflags=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --cflags nss`
+ version=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --modversion nss`
+ nssprefix=`CURL_EXPORT_PCDIR([$NSS_PCDIR]) $PKGCONFIG --variable=prefix nss`
+ fi
+ fi
fi
- if test -n "$addlib"; then
+ if test -z "$addlib"; then
+ # Without pkg-config, we'll kludge in some defaults
+ AC_MSG_WARN([Using hard-wired libraries and compilation flags for NSS.])
+ addld="-L$OPT_NSS/lib"
+ addlib="-lssl3 -lsmime3 -lnss3 -lplds4 -lplc4 -lnspr4"
+ addcflags="-I$OPT_NSS/include"
+ version="unknown"
+ nssprefix=$OPT_NSS
+ fi
- CLEANLIBS="$LIBS"
- CLEANCPPFLAGS="$CPPFLAGS"
+ CLEANLDFLAGS="$LDFLAGS"
+ CLEANLIBS="$LIBS"
+ CLEANCPPFLAGS="$CPPFLAGS"
- LIBS="$LIBS $addlib"
- if test "$addcflags" != "-I/usr/include"; then
- CPPFLAGS="$CPPFLAGS $addcflags"
- fi
+ LDFLAGS="$addld $LDFLAGS"
+ LIBS="$addlib $LIBS"
+ if test "$addcflags" != "-I/usr/include"; then
+ CPPFLAGS="$CPPFLAGS $addcflags"
+ fi
- dnl The function PK11_CreateGenericObject is needed to load libnsspem.so
- AC_CHECK_LIB(nss3, PK11_CreateGenericObject,
- [
- AC_DEFINE(USE_NSS, 1, [if NSS is enabled])
- AC_SUBST(USE_NSS, [1])
- USE_NSS="yes"
- NSS_ENABLED=1
- curl_ssl_msg="enabled (NSS)"
- ],
- [
- LIBS="$CLEANLIBS"
- CPPFLAGS="$CLEANCPPFLAGS"
- ])
+ dnl The function SSL_VersionRangeSet() is needed to enable TLS > 1.0
+ AC_CHECK_LIB(nss3, SSL_VersionRangeSet,
+ [
+ AC_DEFINE(USE_NSS, 1, [if NSS is enabled])
+ AC_SUBST(USE_NSS, [1])
+ USE_NSS="yes"
+ NSS_ENABLED=1
+ curl_ssl_msg="enabled (NSS)"
+ ],
+ [
+ LDFLAGS="$CLEANLDFLAGS"
+ LIBS="$CLEANLIBS"
+ CPPFLAGS="$CLEANCPPFLAGS"
+ ])
- if test "x$USE_NSS" = "xyes"; then
- AC_MSG_NOTICE([detected NSS version $version])
+ if test "x$USE_NSS" = "xyes"; then
+ AC_MSG_NOTICE([detected NSS version $version])
- dnl NSS_InitContext() was introduced in NSS 3.12.5 and helps to prevent
- dnl collisions on NSS initialization/shutdown with other libraries
- AC_CHECK_FUNC(NSS_InitContext,
- [
- AC_DEFINE(HAVE_NSS_INITCONTEXT, 1, [if you have the NSS_InitContext function])
- AC_SUBST(HAVE_NSS_INITCONTEXT, [1])
- ])
+ dnl needed when linking the curl tool without USE_EXPLICIT_LIB_DEPS
+ NSS_LIBS=$addlib
+ AC_SUBST([NSS_LIBS])
- dnl when shared libs were found in a path that the run-time
- dnl linker doesn't search through, we need to add it to
- dnl LD_LIBRARY_PATH to prevent further configure tests to fail
- dnl due to this
- if test "x$cross_compiling" != "xyes"; then
- LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$nssprefix/lib$libsuff"
- export LD_LIBRARY_PATH
- AC_MSG_NOTICE([Added $nssprefix/lib$libsuff to LD_LIBRARY_PATH])
- fi
+ dnl when shared libs were found in a path that the run-time
+ dnl linker doesn't search through, we need to add it to
+ dnl LD_LIBRARY_PATH to prevent further configure tests to fail
+ dnl due to this
+ if test "x$cross_compiling" != "xyes"; then
+ LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$nssprefix/lib$libsuff"
+ export LD_LIBRARY_PATH
+ AC_MSG_NOTICE([Added $nssprefix/lib$libsuff to LD_LIBRARY_PATH])
fi
- fi
+ fi dnl NSS found
fi dnl NSS not disabled
-fi dnl OPENSSL != 1 -a GNUTLS_ENABLED != 1
+fi dnl curl_ssl_msg = init_ssl_msg
OPT_AXTLS=off
USE_AXTLS="yes"
curl_ssl_msg="enabled (axTLS)"
-
- LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_AXTLS"
- export LD_LIBRARY_PATH
- AC_MSG_NOTICE([Added $LIB_AXTLS to LD_LIBRARY_PATH])
+ if test "x$cross_compiling" != "xyes"; then
+ LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$LIB_AXTLS"
+ export LD_LIBRARY_PATH
+ AC_MSG_NOTICE([Added $LIB_AXTLS to LD_LIBRARY_PATH])
+ fi
],[
LDFLAGS="$CLEANLDFLAGS"
CPPFLAGS="$CLEANCPPFLAGS"
fi
fi
-if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED$AXTLS_ENABLED$CYASSL_ENABLED" = "x"; then
+if test "x$OPENSSL_ENABLED$GNUTLS_ENABLED$NSS_ENABLED$POLARSSL_ENABLED$MBEDTLS_ENABLED$AXTLS_ENABLED$CYASSL_ENABLED$WINSSL_ENABLED$DARWINSSL_ENABLED" = "x"; then
AC_MSG_WARN([SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more.])
- AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss or --with-axtls to address this.])
+ AC_MSG_WARN([Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-axtls, --with-winssl, or --with-darwinssl to address this.])
else
# SSL is enabled, genericly
AC_SUBST(SSL_ENABLED)
CURL_CHECK_CA_BUNDLE
dnl **********************************************************************
+dnl Check for libpsl
+dnl **********************************************************************
+
+AC_ARG_WITH(libpsl,
+ AS_HELP_STRING([--without-libpsl],
+ [disable support for libpsl cookie checking]),
+ with_libpsl=$withval,
+ with_libpsl=yes)
+if test $with_libpsl != "no"; then
+ AC_SEARCH_LIBS(psl_builtin, psl,
+ [curl_psl_msg="yes";
+ AC_DEFINE([USE_LIBPSL], [1], [PSL support enabled])
+ ],
+ [curl_psl_msg="no (libpsl not found)";
+ AC_MSG_WARN([libpsl was not found])
+ ]
+ )
+fi
+AM_CONDITIONAL([USE_LIBPSL], [test "$curl_psl_msg" = "yes"])
+
+dnl **********************************************************************
+dnl Check for libmetalink
+dnl **********************************************************************
+
+OPT_LIBMETALINK=no
+
+AC_ARG_WITH(libmetalink,dnl
+AC_HELP_STRING([--with-libmetalink=PATH],[where to look for libmetalink, PATH points to the installation root])
+AC_HELP_STRING([--without-libmetalink], [disable libmetalink detection]),
+ OPT_LIBMETALINK=$withval)
+
+if test X"$OPT_LIBMETALINK" != Xno; then
+
+ addld=""
+ addlib=""
+ addcflags=""
+ version=""
+ libmetalinklib=""
+
+ PKGTEST="no"
+ if test "x$OPT_LIBMETALINK" = "xyes"; then
+ dnl this is with no partiular path given
+ PKGTEST="yes"
+ CURL_CHECK_PKGCONFIG(libmetalink)
+ else
+ dnl When particular path is given, set PKG_CONFIG_LIBDIR using the path.
+ LIBMETALINK_PCDIR="$OPT_LIBMETALINK/lib/pkgconfig"
+ AC_MSG_NOTICE([PKG_CONFIG_LIBDIR will be set to "$LIBMETALINK_PCDIR"])
+ if test -f "$LIBMETALINK_PCDIR/libmetalink.pc"; then
+ PKGTEST="yes"
+ fi
+ if test "$PKGTEST" = "yes"; then
+ CURL_CHECK_PKGCONFIG(libmetalink, [$LIBMETALINK_PCDIR])
+ fi
+ fi
+ if test "$PKGTEST" = "yes" && test "$PKGCONFIG" != "no"; then
+ addlib=`CURL_EXPORT_PCDIR([$LIBMETALINK_PCDIR]) dnl
+ $PKGCONFIG --libs-only-l libmetalink`
+ addld=`CURL_EXPORT_PCDIR([$LIBMETALINK_PCDIR]) dnl
+ $PKGCONFIG --libs-only-L libmetalink`
+ addcflags=`CURL_EXPORT_PCDIR([$LIBMETALINK_PCDIR]) dnl
+ $PKGCONFIG --cflags-only-I libmetalink`
+ version=`CURL_EXPORT_PCDIR([$LIBMETALINK_PCDIR]) dnl
+ $PKGCONFIG --modversion libmetalink`
+ libmetalinklib=`echo $addld | $SED -e 's/-L//'`
+ fi
+ if test -n "$addlib"; then
+
+ clean_CPPFLAGS="$CPPFLAGS"
+ clean_LDFLAGS="$LDFLAGS"
+ clean_LIBS="$LIBS"
+ CPPFLAGS="$addcflags $clean_CPPFLAGS"
+ LDFLAGS="$addld $clean_LDFLAGS"
+ LIBS="$addlib $clean_LIBS"
+ AC_MSG_CHECKING([if libmetalink is recent enough])
+ AC_LINK_IFELSE([
+ AC_LANG_PROGRAM([[
+# include <metalink/metalink.h>
+ ]],[[
+ if(0 != metalink_strerror(0)) /* added in 0.1.0 */
+ return 1;
+ ]])
+ ],[
+ AC_MSG_RESULT([yes ($version)])
+ want_metalink="yes"
+ ],[
+ AC_MSG_RESULT([no ($version)])
+ AC_MSG_NOTICE([libmetalink library defective or too old])
+ want_metalink="no"
+ ])
+ CPPFLAGS="$clean_CPPFLAGS"
+ LDFLAGS="$clean_LDFLAGS"
+ LIBS="$clean_LIBS"
+ if test "$want_metalink" = "yes"; then
+ dnl finally libmetalink will be used
+ AC_DEFINE(USE_METALINK, 1, [Define to enable metalink support])
+ LIBMETALINK_LIBS=$addlib
+ LIBMETALINK_LDFLAGS=$addld
+ LIBMETALINK_CPPFLAGS=$addcflags
+ AC_SUBST([LIBMETALINK_LIBS])
+ AC_SUBST([LIBMETALINK_LDFLAGS])
+ AC_SUBST([LIBMETALINK_CPPFLAGS])
+ curl_mtlnk_msg="enabled"
+ fi
+
+ fi
+fi
+
+dnl **********************************************************************
dnl Check for the presence of LIBSSH2 libraries and headers
dnl **********************************************************************
LDFLAGS="$LDFLAGS $LD_SSH2"
CPPFLAGS="$CPPFLAGS $CPP_SSH2"
- LIBS="$LIBS $LIB_SSH2"
+ LIBS="$LIB_SSH2 $LIBS"
AC_CHECK_LIB(ssh2, libssh2_channel_open_ex)
dnl linker doesn't search through, we need to add it to LD_LIBRARY_PATH
dnl to prevent further configure tests to fail due to this
- dnl libssh2_version is a post 1.0 addition
- dnl libssh2_init and libssh2_exit were added in 1.2.5
- dnl libssh2_scp_send64 was added in 1.2.6
- dnl libssh2_session_handshake was added in 1.2.8
- AC_CHECK_FUNCS( libssh2_version libssh2_init libssh2_exit \
- libssh2_scp_send64 libssh2_session_handshake)
if test "x$cross_compiling" != "xyes"; then
LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$DIR_SSH2"
export LD_LIBRARY_PATH
LDFLAGS="$LDFLAGS $LD_RTMP"
CPPFLAGS="$CPPFLAGS $CPP_RTMP"
- LIBS="$LIBS $LIB_RTMP"
+ LIBS="$LIB_RTMP $LIBS"
AC_CHECK_LIB(rtmp, RTMP_Init,
[
dnl Check for linker switch for versioned symbols
dnl **********************************************************************
-AC_MSG_CHECKING([if libraries can be versioned])
-GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script`
-if test -z "$GLD"; then
- versioned_symbols_flavour=
- AC_MSG_RESULT(no)
- AC_MSG_WARN(***
-*** You need an ld version supporting the --version-script option.
-)
-else
- AC_MSG_RESULT(yes)
-
-AC_MSG_CHECKING([whether versioned symbols are wanted])
versioned_symbols_flavour=
-
+AC_MSG_CHECKING([whether versioned symbols are wanted])
AC_ARG_ENABLE(versioned-symbols,
AC_HELP_STRING([--enable-versioned-symbols], [Enable versioned symbols in shared library])
AC_HELP_STRING([--disable-versioned-symbols], [Disable versioned symbols in shared library]),
[ case "$enableval" in
yes) AC_MSG_RESULT(yes)
- if test "x$OPENSSL_ENABLED" = "x1"; then
- versioned_symbols_flavour="OPENSSL_"
- elif test "x$GNUTLS_ENABLED" == "x1"; then
- versioned_symbols_flavour="GNUTLS_"
- elif test "x$NSS_ENABLED" == "x1"; then
- versioned_symbols_flavour="NSS_"
- elif test "x$POLARSSL_ENABLED" == "x1"; then
- versioned_symbols_flavour="POLARSSL_"
- elif test "x$CYASSL_ENABLED" == "x1"; then
- versioned_symbols_flavour="CYASSL_"
- elif test "x$AXTLS_ENABLED" == "x1"; then
- versioned_symbols_flavour="AXTLS_"
+ AC_MSG_CHECKING([if libraries can be versioned])
+ GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script`
+ if test -z "$GLD"; then
+ AC_MSG_RESULT(no)
+ AC_MSG_WARN([You need an ld version supporting the --version-script option])
else
- versioned_symbols_flavour=""
+ AC_MSG_RESULT(yes)
+ if test "x$OPENSSL_ENABLED" = "x1"; then
+ versioned_symbols_flavour="OPENSSL_"
+ elif test "x$GNUTLS_ENABLED" = "x1"; then
+ versioned_symbols_flavour="GNUTLS_"
+ elif test "x$NSS_ENABLED" = "x1"; then
+ versioned_symbols_flavour="NSS_"
+ elif test "x$POLARSSL_ENABLED" = "x1"; then
+ versioned_symbols_flavour="POLARSSL_"
+ elif test "x$CYASSL_ENABLED" = "x1"; then
+ versioned_symbols_flavour="CYASSL_"
+ elif test "x$AXTLS_ENABLED" = "x1"; then
+ versioned_symbols_flavour="AXTLS_"
+ elif test "x$WINSSL_ENABLED" = "x1"; then
+ versioned_symbols_flavour="WINSSL_"
+ elif test "x$DARWINSSL_ENABLED" = "x1"; then
+ versioned_symbols_flavour="DARWINSSL_"
+ else
+ versioned_symbols_flavour=""
+ fi
+ versioned_symbols="yes"
fi
- versioned_symbols="yes"
;;
*) AC_MSG_RESULT(no)
AC_MSG_RESULT(no)
]
)
-fi
-AC_SUBST(VERSIONED_FLAVOUR, ["$versioned_symbols_flavour"])
-AM_CONDITIONAL(VERSIONED_SYMBOLS, test "x$versioned_symbols" = "xyes")
+AC_SUBST([CURL_LT_SHLIB_VERSIONED_FLAVOUR],
+ ["$versioned_symbols_flavour"])
+AM_CONDITIONAL([CURL_LT_SHLIB_USE_VERSIONED_SYMBOLS],
+ [test "x$versioned_symbols" = 'xyes'])
+
+dnl -------------------------------------------------
+dnl check winidn option before other IDN libraries
+dnl -------------------------------------------------
+
+AC_MSG_CHECKING([whether to enable Windows native IDN (Windows native builds only)])
+OPT_WINIDN="default"
+AC_ARG_WITH(winidn,
+AC_HELP_STRING([--with-winidn=PATH],[enable Windows native IDN])
+AC_HELP_STRING([--without-winidn], [disable Windows native IDN]),
+ OPT_WINIDN=$withval)
+case "$OPT_WINIDN" in
+ no|default)
+ dnl --without-winidn option used or configure option not specified
+ want_winidn="no"
+ AC_MSG_RESULT([no])
+ ;;
+ yes)
+ dnl --with-winidn option used without path
+ want_winidn="yes"
+ want_winidn_path="default"
+ AC_MSG_RESULT([yes])
+ ;;
+ *)
+ dnl --with-winidn option used with path
+ want_winidn="yes"
+ want_winidn_path="$withval"
+ AC_MSG_RESULT([yes ($withval)])
+ ;;
+esac
+if test "$want_winidn" = "yes"; then
+ dnl winidn library support has been requested
+ clean_CPPFLAGS="$CPPFLAGS"
+ clean_LDFLAGS="$LDFLAGS"
+ clean_LIBS="$LIBS"
+ WINIDN_LIBS="-lnormaliz"
+ #
+ if test "$want_winidn_path" != "default"; then
+ dnl path has been specified
+ dnl pkg-config not available or provides no info
+ WINIDN_LDFLAGS="-L$want_winidn_path/lib$libsuff"
+ WINIDN_CPPFLAGS="-I$want_winidn_path/include"
+ WINIDN_DIR="$want_winidn_path/lib$libsuff"
+ fi
+ #
+ CPPFLAGS="$WINIDN_CPPFLAGS $CPPFLAGS"
+ LDFLAGS="$WINIDN_LDFLAGS $LDFLAGS"
+ LIBS="$WINIDN_LIBS $LIBS"
+ #
+ AC_MSG_CHECKING([if IdnToUnicode can be linked])
+ AC_LINK_IFELSE([
+ AC_LANG_FUNC_LINK_TRY([IdnToUnicode])
+ ],[
+ AC_MSG_RESULT([yes])
+ tst_links_winidn="yes"
+ ],[
+ AC_MSG_RESULT([no])
+ tst_links_winidn="no"
+ ])
+ #
+ if test "$tst_links_winidn" = "yes"; then
+ AC_DEFINE(USE_WIN32_IDN, 1, [Define to 1 if you have the `normaliz' (WinIDN) library (-lnormaliz).])
+ AC_DEFINE(WANT_IDN_PROTOTYPES, 1, [Define to 1 to provide own prototypes.])
+ AC_SUBST([IDN_ENABLED], [1])
+ curl_idn_msg="enabled (Windows-native)"
+ else
+ AC_MSG_WARN([Cannot find libraries for IDN support: IDN disabled])
+ CPPFLAGS="$clean_CPPFLAGS"
+ LDFLAGS="$clean_LDFLAGS"
+ LIBS="$clean_LIBS"
+ fi
+fi
dnl **********************************************************************
dnl Check for the presence of IDN libraries and headers
if test "x$ac_cv_header_tld_h" = "xyes"; then
AC_SUBST([IDN_ENABLED], [1])
curl_idn_msg="enabled"
- if test -n "$IDN_DIR"; then
+ if test -n "$IDN_DIR" -a "x$cross_compiling" != "xyes"; then
LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$IDN_DIR"
export LD_LIBRARY_PATH
AC_MSG_NOTICE([Added $IDN_DIR to LD_LIBRARY_PATH])
dnl **********************************************************************
+dnl Check for nghttp2
+dnl **********************************************************************
+
+OPT_H2="yes"
+AC_ARG_WITH(nghttp2,
+AC_HELP_STRING([--with-nghttp2=PATH],[Enable nghttp2 usage])
+AC_HELP_STRING([--without-nghttp2],[Disable nghttp2 usage]),
+ [OPT_H2=$withval])
+case "$OPT_H2" in
+ no)
+ dnl --without-nghttp2 option used
+ want_h2="no"
+ ;;
+ yes)
+ dnl --with-nghttp2 option used without path
+ want_h2="default"
+ want_h2_path=""
+ ;;
+ *)
+ dnl --with-nghttp2 option used with path
+ want_h2="yes"
+ want_h2_path="$withval/lib/pkgconfig"
+ ;;
+esac
+
+curl_h2_msg="disabled (--with-nghttp2)"
+if test X"$want_h2" != Xno; then
+ dnl backup the pre-nghttp2 variables
+ CLEANLDFLAGS="$LDFLAGS"
+ CLEANCPPFLAGS="$CPPFLAGS"
+ CLEANLIBS="$LIBS"
+
+ CURL_CHECK_PKGCONFIG(libnghttp2, $want_h2_path)
+
+ if test "$PKGCONFIG" != "no" ; then
+ LIB_H2=`CURL_EXPORT_PCDIR([$want_h2_path])
+ $PKGCONFIG --libs-only-l libnghttp2`
+ AC_MSG_NOTICE([-l is $LIB_H2])
+
+ CPP_H2=`CURL_EXPORT_PCDIR([$want_h2_path]) dnl
+ $PKGCONFIG --cflags-only-I libnghttp2`
+ AC_MSG_NOTICE([-I is $CPP_H2])
+
+ LD_H2=`CURL_EXPORT_PCDIR([$want_h2_path])
+ $PKGCONFIG --libs-only-L libnghttp2`
+ AC_MSG_NOTICE([-L is $LD_H2])
+
+ LDFLAGS="$LDFLAGS $LD_H2"
+ CPPFLAGS="$CPPFLAGS $CPP_H2"
+ LIBS="$LIB_H2 $LIBS"
+
+ # use nghttp2_option_set_no_recv_client_magic to require nghttp2
+ # >= 1.0.0
+ AC_CHECK_LIB(nghttp2, nghttp2_option_set_no_recv_client_magic,
+ [
+ AC_CHECK_HEADERS(nghttp2/nghttp2.h,
+ curl_h2_msg="enabled (nghttp2)"
+ NGHTTP2_ENABLED=1
+ AC_DEFINE(USE_NGHTTP2, 1, [if nghttp2 is in use])
+ AC_SUBST(USE_NGHTTP2, [1])
+ )
+ ],
+ dnl not found, revert back to clean variables
+ LDFLAGS=$CLEANLDFLAGS
+ CPPFLAGS=$CLEANCPPFLAGS
+ LIBS=$CLEANLIBS
+ )
+
+ else
+ dnl no nghttp2 pkg-config found, deal with it
+ if test X"$want_h2" != Xdefault; then
+ dnl To avoid link errors, we do not allow --with-nghttp2 without
+ dnl a pkgconfig file
+ AC_MSG_ERROR([--with-nghttp2 was specified but could not find libnghttp2 pkg-config file.])
+ fi
+ fi
+
+fi
+
+dnl **********************************************************************
+dnl Check for zsh completion path
+dnl **********************************************************************
+
+OPT_ZSH_FPATH=default
+AC_ARG_WITH(zsh-functions-dir,
+AC_HELP_STRING([--with-zsh-functions-dir=PATH],[Install zsh completions to PATH])
+AC_HELP_STRING([--without-zsh-functions-dir],[Do not install zsh completions]),
+ [OPT_ZSH_FPATH=$withval])
+case "$OPT_ZSH_FPATH" in
+ no)
+ dnl --without-zsh-functions-dir option used
+ ;;
+ default|yes)
+ dnl --with-zsh-functions-dir option used without path
+ ZSH_FUNCTIONS_DIR="$datarootdir/zsh/site-functions"
+ AC_SUBST(ZSH_FUNCTIONS_DIR)
+ ;;
+ *)
+ dnl --with-zsh-functions-dir option used with path
+ ZSH_FUNCTIONS_DIR="$withval"
+ AC_SUBST(ZSH_FUNCTIONS_DIR)
+ ;;
+esac
+
+dnl **********************************************************************
dnl Back to "normal" configuring
dnl **********************************************************************
AC_CHECK_SIZEOF(off_t)
soname_bump=no
-if test x"$ac_cv_native_windows" != "xyes" &&
+if test x"$curl_cv_native_windows" != "xyes" &&
test $ac_cv_sizeof_off_t -ne $curl_sizeof_curl_off_t; then
AC_MSG_WARN([This libcurl built is probably not ABI compatible with previous])
AC_MSG_WARN([builds! You MUST read lib/README.curl_off_t to figure it out.])
CURL_CONFIGURE_CURL_SOCKLEN_T
+CURL_CONFIGURE_PULL_SYS_POLL
+
TYPE_IN_ADDR_T
TYPE_SOCKADDR_STORAGE
CURL_CHECK_FUNC_SELECT
CURL_CHECK_FUNC_RECV
-CURL_CHECK_FUNC_RECVFROM
CURL_CHECK_FUNC_SEND
CURL_CHECK_MSG_NOSIGNAL
CURL_CHECK_FUNC_SOCKET
CURL_CHECK_FUNC_SOCKETPAIR
CURL_CHECK_FUNC_STRCASECMP
-CURL_CHECK_FUNC_STRCASESTR
CURL_CHECK_FUNC_STRCMPI
CURL_CHECK_FUNC_STRDUP
CURL_CHECK_FUNC_STRERROR_R
CURL_CHECK_FUNC_STRICMP
-CURL_CHECK_FUNC_STRLCAT
CURL_CHECK_FUNC_STRNCASECMP
CURL_CHECK_FUNC_STRNCMPI
CURL_CHECK_FUNC_STRNICMP
getppid \
getprotobyname \
getpwuid \
+ getpwuid_r \
getrlimit \
gettimeofday \
+ if_nametoindex \
inet_addr \
perror \
pipe \
CURL_CHECK_FUNC_GETNAMEINFO
if test "$ipv6" = "yes"; then
- if test "$ac_cv_func_getaddrinfo" = "yes"; then
+ if test "$curl_cv_func_getaddrinfo" = "yes"; then
AC_DEFINE(ENABLE_IPV6, 1, [Define if you want to enable IPv6 support])
IPV6_ENABLED=1
AC_SUBST(IPV6_ENABLED)
CURL_CHECK_NI_WITHSCOPEID
fi
-dnl ************************************************************
-dnl enable non-blocking communications
-dnl
-CURL_CHECK_OPTION_NONBLOCKING
CURL_CHECK_NONBLOCKING_SOCKET
dnl ************************************************************
CURL_CHECK_LIB_ARES
AM_CONDITIONAL(USE_EMBEDDED_ARES, test x$embedded_ares = xyes)
-if test "x$ac_cv_native_windows" != "xyes" &&
+if test "x$curl_cv_native_windows" != "xyes" &&
test "x$enable_shared" = "xyes"; then
build_libhostname=yes
else
[Options --enable-threaded-resolver and --enable-ares are mutually exclusive])
fi
-if test "$want_thres" = "yes"; then
+if test "$want_thres" = "yes" && test "$dontwant_rt" = "no"; then
AC_CHECK_HEADER(pthread.h,
[ AC_DEFINE(HAVE_PTHREAD_H, 1, [if you have <pthread.h>])
save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -pthread"
- AC_CHECK_LIB(pthread, pthread_create,
- [ AC_MSG_NOTICE([using POSIX threaded DNS lookup])
- AC_DEFINE(USE_THREADS_POSIX, 1, [if you want POSIX threaded DNS lookup])
- USE_THREADS_POSIX=1
- curl_res_msg="threaded"
- ],
- [ CFLAGS="$save_CFLAGS"])
+
+ dnl first check for function without lib
+ AC_CHECK_FUNC(pthread_create, [USE_THREADS_POSIX=1] )
+
+ dnl if it wasn't found without lib, search for it in pthread lib
+ if test "$USE_THREADS_POSIX" != "1"
+ then
+ CFLAGS="$CFLAGS -pthread"
+ AC_CHECK_LIB(pthread, pthread_create,
+ [USE_THREADS_POSIX=1],
+ [ CFLAGS="$save_CFLAGS"])
+ fi
+
+ if test "x$USE_THREADS_POSIX" = "x1"
+ then
+ AC_DEFINE(USE_THREADS_POSIX, 1, [if you want POSIX threaded DNS lookup])
+ curl_res_msg="POSIX threaded"
+ fi
+
+
])
fi
AC_HELP_STRING([--disable-sspi],[Disable SSPI]),
[ case "$enableval" in
yes)
- if test "$ac_cv_native_windows" = "yes"; then
+ if test "$curl_cv_native_windows" = "yes"; then
AC_MSG_RESULT(yes)
AC_DEFINE(USE_WINDOWS_SSPI, 1, [to enable SSPI support])
AC_SUBST(USE_WINDOWS_SSPI, [1])
fi
;;
*)
- AC_MSG_RESULT(no)
+ if test "x$WINSSL_ENABLED" = "x1"; then
+ # --with-winssl implies --enable-sspi
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ fi
;;
esac ],
- AC_MSG_RESULT(no)
+ if test "x$WINSSL_ENABLED" = "x1"; then
+ # --with-winssl implies --enable-sspi
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ fi
)
dnl ************************************************************
no)
AC_MSG_RESULT(no)
AC_DEFINE(CURL_DISABLE_CRYPTO_AUTH, 1, [to disable cryptographic authentication])
+ CURL_DISABLE_CRYPTO_AUTH=1
;;
*) AC_MSG_RESULT(yes)
;;
want_tls_srp=yes
)
-if test "$want_tls_srp" = "yes" && ( test "x$HAVE_GNUTLS_SRP" = "x1" || test "x$HAVE_SSLEAY_SRP" = "x1") ; then
+if test "$want_tls_srp" = "yes" && ( test "x$HAVE_GNUTLS_SRP" = "x1" || test "x$HAVE_OPENSSL_SRP" = "x1") ; then
AC_DEFINE(USE_TLS_SRP, 1, [Use TLS-SRP authentication])
USE_TLS_SRP=1
curl_tls_srp_msg="enabled"
fi
dnl ************************************************************
+dnl disable Unix domain sockets support
+dnl
+AC_MSG_CHECKING([whether to enable Unix domain sockets])
+AC_ARG_ENABLE(unix-sockets,
+AC_HELP_STRING([--enable-unix-sockets],[Enable Unix domain sockets])
+AC_HELP_STRING([--disable-unix-sockets],[Disable Unix domain sockets]),
+[ case "$enableval" in
+ no) AC_MSG_RESULT(no)
+ want_unix_sockets=no
+ ;;
+ *) AC_MSG_RESULT(yes)
+ want_unix_sockets=yes
+ ;;
+ esac ], [
+ AC_MSG_RESULT(auto)
+ want_unix_sockets=auto
+ ]
+)
+if test "x$want_unix_sockets" != "xno"; then
+ AC_CHECK_MEMBER([struct sockaddr_un.sun_path], [
+ AC_DEFINE(USE_UNIX_SOCKETS, 1, [Use Unix domain sockets])
+ AC_SUBST(USE_UNIX_SOCKETS, [1])
+ curl_unix_sockets_msg="enabled"
+ ], [
+ if test "x$want_unix_sockets" = "xyes"; then
+ AC_MSG_ERROR([--enable-unix-sockets is not available on this platform!])
+ fi
+ ], [
+ #include <sys/un.h>
+ ])
+fi
+
+dnl ************************************************************
dnl disable cookies support
dnl
AC_MSG_CHECKING([whether to enable support for cookies])
)
AM_CONDITIONAL(SONAME_BUMP, test x$soname_bump = xyes)
-
-dnl ************************************************************
-if test ! -z "$winsock_LIB"; then
-
- dnl If ws2_32 is wanted, make sure it is the _last_ lib in LIBS (makes
- dnl things work when built with c-ares). But we can't just move it last
- dnl since then other stuff (SSL) won't build. So we simply append it to the
- dnl end.
-
- LIBS="$LIBS $winsock_LIB"
- TEST_SERVER_LIBS="$TEST_SERVER_LIBS $winsock_LIB"
-
-fi
-
dnl
dnl All the library dependencies put into $LIB apply to libcurl only.
-dnl Those in $CURL_LIBS apply to the curl command-line client only.
-dnl Those in $TEST_SERVER_LIBS apply to test servers only.
-dnl Those in $ALL_LIBS apply to all targets, including test targets.
dnl
LIBCURL_LIBS=$LIBS
AC_SUBST(LIBCURL_LIBS)
-AC_SUBST(CURL_LIBS)
-AC_SUBST(TEST_SERVER_LIBS)
AC_SUBST(CURL_NETWORK_LIBS)
-LIBS=$ALL_LIBS dnl LIBS is a magic variable that's used for every link
+AC_SUBST(CURL_NETWORK_AND_TIME_LIBS)
+
+dnl BLANK_AT_MAKETIME may be used in our Makefile.am files to blank
+dnl LIBS variable used in generated makefile at makefile processing
+dnl time. Doing this functionally prevents LIBS from being used for
+dnl all link targets in given makefile.
+BLANK_AT_MAKETIME=
+AC_SUBST(BLANK_AT_MAKETIME)
AM_CONDITIONAL(CROSSCOMPILING, test x$cross_compiling = xyes)
ENABLE_SHARED="$enable_shared"
AC_SUBST(ENABLE_SHARED)
+dnl to let curl-config output the static libraries correctly
+ENABLE_STATIC="$enable_static"
+AC_SUBST(ENABLE_STATIC)
+
+
dnl
dnl For keeping supported features and protocols also in pkg-config file
-dnl since it is more cross-compile frient than curl-config
+dnl since it is more cross-compile friendly than curl-config
dnl
-if test "x$USE_SSLEAY" = "x1"; then
+if test "x$OPENSSL_ENABLED" = "x1"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES SSL"
elif test -n "$SSL_ENABLED"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES SSL"
fi
-if test "@KRB4_ENABLED@" = "x1"; then
- SUPPORT_FEATURES="$SUPPORT_FEATURES KRB4"
-fi
if test "x$IPV6_ENABLED" = "x1"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES IPv6"
fi
+if test "x$USE_UNIX_SOCKETS" = "x1"; then
+ SUPPORT_FEATURES="$SUPPORT_FEATURES UnixSockets"
+fi
if test "x$HAVE_LIBZ" = "x1"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES libz"
fi
if test "x$USE_WINDOWS_SSPI" = "x1"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES SSPI"
fi
-if test "x$CURL_DISABLE_HTTP" != "x1"; then
- if test "x$USE_SSLEAY" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \
- -o "x$GNUTLS_ENABLED" = "x1" -o "x$NSS_ENABLED" = "x1"; then
+
+if test "x$HAVE_GSSAPI" = "x1"; then
+ SUPPORT_FEATURES="$SUPPORT_FEATURES GSS-API"
+fi
+
+if test "x$curl_psl_msg" = "xyes"; then
+ SUPPORT_FEATURES="$SUPPORT_FEATURES PSL"
+fi
+
+if test "x$CURL_DISABLE_CRYPTO_AUTH" != "x1" -a \
+ \( "x$HAVE_GSSAPI" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \); then
+ SUPPORT_FEATURES="$SUPPORT_FEATURES SPNEGO"
+fi
+
+if test "x$CURL_DISABLE_CRYPTO_AUTH" != "x1" -a \
+ \( "x$HAVE_GSSAPI" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \); then
+ SUPPORT_FEATURES="$SUPPORT_FEATURES Kerberos"
+fi
+
+if test "x$CURL_DISABLE_CRYPTO_AUTH" != "x1"; then
+ if test "x$OPENSSL_ENABLED" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \
+ -o "x$GNUTLS_ENABLED" = "x1" -o "x$MBEDTLS_ENABLED" = "x1" \
+ -o "x$NSS_ENABLED" = "x1" -o "x$DARWINSSL_ENABLED" = "x1"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES NTLM"
- if test "x$NTLM_WB_ENABLED" = "x1"; then
+
+ if test "x$CURL_DISABLE_HTTP" != "x1" -a \
+ "x$NTLM_WB_ENABLED" = "x1"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES NTLM_WB"
fi
fi
fi
+
if test "x$USE_TLS_SRP" = "x1"; then
SUPPORT_FEATURES="$SUPPORT_FEATURES TLS-SRP"
fi
+if test "x$USE_NGHTTP2" = "x1"; then
+ SUPPORT_FEATURES="$SUPPORT_FEATURES HTTP2"
+fi
+
AC_SUBST(SUPPORT_FEATURES)
dnl For supported protocols in pkg-config file
SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS IMAPS"
fi
fi
+if test "x$CURL_DISABLE_SMB" != "x1" \
+ -a "x$CURL_DISABLE_CRYPTO_AUTH" != "x1" \
+ -a \( "x$OPENSSL_ENABLED" = "x1" -o "x$USE_WINDOWS_SSPI" = "x1" \
+ -o "x$GNUTLS_ENABLED" = "x1" -o "x$MBEDTLS_ENABLED" = "x1" \
+ -o "x$NSS_ENABLED" = "x1" -o "x$DARWINSSL_ENABLED" = "x1" \); then
+ SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SMB"
+ if test "x$SSL_ENABLED" = "x1"; then
+ SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SMBS"
+ fi
+fi
if test "x$CURL_DISABLE_SMTP" != "x1"; then
SUPPORT_PROTOCOLS="$SUPPORT_PROTOCOLS SMTP"
if test "x$SSL_ENABLED" = "x1"; then
squeeze LDFLAGS
squeeze LIBS
-squeeze CURL_LIBS
squeeze LIBCURL_LIBS
-squeeze TEST_SERVER_LIBS
squeeze CURL_NETWORK_LIBS
+squeeze CURL_NETWORK_AND_TIME_LIBS
squeeze SUPPORT_FEATURES
squeeze SUPPORT_PROTOCOLS
+XC_CHECK_BUILD_FLAGS
+
if test "x$want_curldebug_assumed" = "xyes" &&
test "x$want_curldebug" = "xyes" && test "x$USE_ARES" = "x1"; then
ac_configure_args="$ac_configure_args --enable-curldebug"
docs/Makefile \
docs/examples/Makefile \
docs/libcurl/Makefile \
+ docs/libcurl/opts/Makefile \
include/Makefile \
include/curl/Makefile \
src/Makefile \
lib/Makefile \
+ scripts/Makefile \
lib/libcurl.vers \
tests/Makefile \
+ tests/certs/Makefile \
+ tests/certs/scripts/Makefile \
tests/data/Makefile \
tests/server/Makefile \
tests/libtest/Makefile \
CURL_GENERATE_CONFIGUREHELP_PM
+XC_AMEND_DISTCLEAN([lib src tests/unit tests/server tests/libtest docs/examples])
+
AC_MSG_NOTICE([Configured to build curl/libcurl:
curl version: ${CURLVERSION}
SSL support: ${curl_ssl_msg}
SSH support: ${curl_ssh_msg}
zlib support: ${curl_zlib_msg}
- krb4 support: ${curl_krb4_msg}
- GSSAPI support: ${curl_gss_msg}
- SPNEGO support: ${curl_spnego_msg}
+ GSS-API support: ${curl_gss_msg}
TLS-SRP support: ${curl_tls_srp_msg}
resolver: ${curl_res_msg}
- ipv6 support: ${curl_ipv6_msg}
+ IPv6 support: ${curl_ipv6_msg}
+ Unix sockets support: ${curl_unix_sockets_msg}
IDN support: ${curl_idn_msg}
Build libcurl: Shared=${enable_shared}, Static=${enable_static}
Built-in manual: ${curl_manual_msg}
--libcurl option: ${curl_libcurl_msg}
Verbose errors: ${curl_verbose_msg}
SSPI support: ${curl_sspi_msg}
- ca cert bundle: ${ca}
- ca cert path: ${capath}
+ ca cert bundle: ${ca}${ca_warning}
+ ca cert path: ${capath}${capath_warning}
+ ca fallback: ${with_ca_fallback}
LDAP support: ${curl_ldap_msg}
LDAPS support: ${curl_ldaps_msg}
RTSP support: ${curl_rtsp_msg}
RTMP support: ${curl_rtmp_msg}
+ metalink support: ${curl_mtlnk_msg}
+ PSL support: ${curl_psl_msg}
+ HTTP2 support: ${curl_h2_msg}
Protocols: ${SUPPORT_PROTOCOLS}
])