echo "$2" "$eq" "$3" >> "$QMAKE_VARS_FILE"
}
+shellArgumentListToQMakeListHelper()
+{
+ local retval
+ for arg in "$@"; do retval="$retval \"$arg\""; done
+ echo "$retval"
+}
+
+# Convert a string usable on a shell command line into word-by-word quoted
+# qmake list.
+shellArgumentListToQMakeList()
+{
+ # eval is needed for the shell to interpret the backslash escape sequences
+ eval shellArgumentListToQMakeListHelper "$@"
+}
+
# Helper function for getQMakeConf. It parses include statements in
# qmake.conf and prints out the expanded file
getQMakeConf1()
CFG_FRAMEWORK=auto
MAC_CONFIG_TEST_COMMANDLINE= # used to make the configure tests run with the correct arch's and SDK settings
CFG_MAC_HARFBUZZ=no
-CFG_SXE=no
CFG_PREFIX_INSTALL=yes
CFG_SDK=
DEFINES=
bindir)
QT_INSTALL_BINS="$VAL"
;;
- sxe)
- CFG_SXE="$VAL"
- ;;
sse)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_SSE="$VAL"
# save a pre-existing mkspecs/modules dir
test -d "$outpath/mkspecs/modules" && \
mv "$outpath/mkspecs/modules" "$outpath/mkspecs-modules"
+ # ditto for mkspecs/modules-inst
+ test -d "$outpath/mkspecs/modules-inst" && \
+ mv "$outpath/mkspecs/modules-inst" "$outpath/mkspecs-modules-inst"
# symlink the mkspecs directory
mkdir -p "$outpath/mkspecs"
ShadowMkspecs modules
fi
+ # The modules-inst dir is not quite as special, but still.
+ if test -d "$outpath/mkspecs-modules-inst"; then
+ rm -rf "$outpath/mkspecs/modules-inst"
+ mv "$outpath/mkspecs-modules-inst" "$outpath/mkspecs/modules-inst"
+ fi
+
# symlink the doc directory
rm -rf "$outpath/doc"
ln -s "$relpath/doc" "$outpath/doc"
QMAKE_LIBDIR_OPENGL_ES2=`$PKG_CONFIG --libs-only-L glesv2 2>/dev/null | sed -e 's,^-L,,g' -e 's, -L, ,g'`
QMAKE_LIBS_OPENGL_ES2=`$PKG_CONFIG --libs glesv2 2>/dev/null`
QMAKE_CFLAGS_OPENGL_ES2=`$PKG_CONFIG --cflags glesv2 2>/dev/null`
- QMakeVar set QMAKE_INCDIR_OPENGL_ES2 "$QMAKE_INCDIR_OPENGL_ES2"
- QMakeVar set QMAKE_LIBDIR_OPENGL_ES2 "$QMAKE_LIBDIR_OPENGL_ES2"
- QMakeVar set QMAKE_LIBS_OPENGL_ES2 "$QMAKE_LIBS_OPENGL_ES2"
+ QMakeVar set QMAKE_INCDIR_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_INCDIR_OPENGL_ES2"`"
+ QMakeVar set QMAKE_LIBDIR_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_LIBDIR_OPENGL_ES2"`"
+ QMakeVar set QMAKE_LIBS_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_LIBS_OPENGL_ES2"`"
fi
"$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS $QMAKE_LIBS_OPENGL_ES2 $QMAKE_CFLAGS_OPENGL_ES2
QT_CONFIG="$QT_CONFIG xcb-xlib"
fi
- if [ "$XPLATFORM_MAEMO" = "yes" ]; then
- # auto-detect XInput2/Xinput support
- if [ "$CFG_XINPUT2" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xinput2 "XInput2" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS; then
- CFG_XINPUT2=yes
- CFG_XINPUT=no
+ # auto-detect XInput2 support. Needed by xcb too.
+ if [ "$CFG_XINPUT2" != "no" ]; then
+ if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xinput2 "XInput2" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS; then
+ CFG_XINPUT2=yes
+ CFG_XINPUT=no
+ else
+ if [ "$CFG_XINPUT2" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
+ echo "XInput2 support cannot be enabled due to functionality tests!"
+ echo " Turn on verbose messaging (-v) to $0 to see the final report."
+ echo " If you believe this message is in error you may use the continue"
+ echo " switch (-continue) to $0 to continue."
+ exit 101
else
- if [ "$CFG_XINPUT2" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
- echo "XInput2 support cannot be enabled due to functionality tests!"
- echo " Turn on verbose messaging (-v) to $0 to see the final report."
- echo " If you believe this message is in error you may use the continue"
- echo " switch (-continue) to $0 to continue."
- exit 101
- else
- CFG_XINPUT2=no
- fi
+ CFG_XINPUT2=no
fi
fi
fi
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists directfb 2>/dev/null; then
QMAKE_CFLAGS_DIRECTFB=`$PKG_CONFIG --cflags directfb 2>/dev/null`
QMAKE_LIBS_DIRECTFB=`$PKG_CONFIG --libs directfb 2>/dev/null`
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/directfb" "DirectFB" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS $QMAKE_CFLAGS_DIRECTFB $QMAKE_LIBS_DIRECTFB; then
+ if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/qpa/directfb" "DirectFB" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS $QMAKE_CFLAGS_DIRECTFB $QMAKE_LIBS_DIRECTFB; then
CFG_DIRECTFB=yes
elif [ "$CFG_DIRECTFB" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo " DirectFB support cannot be enabled due to functionality tests!"
QT_CONFIG="$QT_CONFIG opengles2"
fi
-# safe execution environment
-if [ "$CFG_SXE" != "no" ]; then
- QT_CONFIG="$QT_CONFIG sxe"
-fi
-
# build up the variables for output
if [ "$CFG_DEBUG" = "yes" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}debug"
[ "$CFG_PNG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_PNG"
[ "$CFG_JPEG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_JPEG"
[ "$CFG_ZLIB" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ZLIB"
-[ "$CFG_SXE" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SXE"
[ "$CFG_DBUS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_DBUS"
# X11/Unix/Mac only configs
if [ -n "$CFG_SYSROOT" ]; then
echo "# sysroot" >>"$QTCONFIG.tmp"
- echo `basename "$XQMAKESPEC"` \{ >>"$QTCONFIG.tmp"
+ echo "!host_build {" >>"$QTCONFIG.tmp"
echo " QMAKE_CFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
echo " QMAKE_CXXFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
echo " QMAKE_LFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
if [ -n "$QMAKE_INCDIR_OPENGL_ES2" ]; then
echo "#Qt opengl include path" >> "$QTCONFIG.tmp"
- echo "QMAKE_INCDIR_OPENGL_ES2 = \"$QMAKE_INCDIR_OPENGL_ES2\"" >> "$QTCONFIG.tmp"
+ echo "QMAKE_INCDIR_OPENGL_ES2 = `shellArgumentListToQMakeList "$QMAKE_INCDIR_OPENGL_ES2"`" >> "$QTCONFIG.tmp"
fi
# replace qconfig.pri if it differs from the newly created temp file
QTMODULE="$outpath/mkspecs/qmodule.pri"
echo "CONFIG += $QMAKE_CONFIG create_prl link_prl" >> "$QTMODULE.tmp"
+echo "QT_BUILD_PARTS = $CFG_BUILD_PARTS" >> "$QTMODULE.tmp"
# Ensure we can link to uninistalled libraries
if [ "$BUILD_ON_MAC" != "yes" ] && [ "$XPLATFORM_MINGW" != "yes" ] && linkerSupportsFlag -rpath-link "$outpath/lib"; then
#paths
QT_SOURCE_TREE = \$\$quote($relpath)
QT_BUILD_TREE = \$\$quote($outpath)
-QT_BUILD_PARTS = $CFG_BUILD_PARTS
include(\$\$PWD/mkspecs/qmodule.pri)
CONFIG += dylib depend_includepath fix_output_dirs no_private_qt_headers_warning QTDIR_build
EOF
-#dump the qmake spec
-if [ -d "$outpath/mkspecs/$XPLATFORM" ]; then
- echo "XQMAKESPEC = \$\$QT_BUILD_TREE/mkspecs/$XPLATFORM" >> "$CACHEFILE.tmp"
-else
- echo "XQMAKESPEC = $XPLATFORM" >> "$CACHEFILE.tmp"
-fi
-if [ -d "$outpath/mkspecs/$PLATFORM" ]; then
- echo "QMAKESPEC = \$\$QT_BUILD_TREE/mkspecs/$PLATFORM" >> "$CACHEFILE.tmp"
-else
- echo "QMAKESPEC = $PLATFORM" >> "$CACHEFILE.tmp"
-fi
-
# replace .qmake.cache if it differs from the newly created temp file
if cmp -s "$CACHEFILE.tmp" "$CACHEFILE"; then
rm -f "$CACHEFILE.tmp"
echo "Xfixes support ......... $CFG_XFIXES"
echo "Xrandr support ......... $CFG_XRANDR"
echo "Xi support ............. $CFG_XINPUT"
+echo "Xi2 support ............ $CFG_XINPUT2"
echo "MIT-SHM support ........ $CFG_MITSHM"
echo "FontConfig support ..... $CFG_FONTCONFIG"
echo "XKB Support ............ $CFG_XKB"