#!/bin/sh
#############################################################################
##
-## Copyright (C) 2012 Nokia Corporation and/or its subsidiary(-ies).
-## Contact: http://www.qt-project.org/
+## Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
+## Contact: http://www.qt-project.org/legal
##
## This file is the build configuration utility of the Qt Toolkit.
##
## $QT_BEGIN_LICENSE:LGPL$
+## Commercial License Usage
+## Licensees holding valid commercial Qt licenses may use this file in
+## accordance with the commercial license agreement provided with the
+## Software or, alternatively, in accordance with the terms contained in
+## a written agreement between you and Digia. For licensing terms and
+## conditions see http://qt.digia.com/licensing. For further information
+## use the contact form at http://qt.digia.com/contact-us.
+##
## GNU Lesser General Public License Usage
-## This file may be used under the terms of the GNU Lesser General Public
-## License version 2.1 as published by the Free Software Foundation and
-## appearing in the file LICENSE.LGPL included in the packaging of this
-## file. Please review the following information to ensure the GNU Lesser
-## General Public License version 2.1 requirements will be met:
-## http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+## Alternatively, this file may be used under the terms of the GNU Lesser
+## General Public License version 2.1 as published by the Free Software
+## Foundation and appearing in the file LICENSE.LGPL included in the
+## packaging of this file. Please review the following information to
+## ensure the GNU Lesser General Public License version 2.1 requirements
+## will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
##
-## In addition, as a special exception, Nokia gives you certain additional
-## rights. These rights are described in the Nokia Qt LGPL Exception
+## In addition, as a special exception, Digia gives you certain additional
+## rights. These rights are described in the Digia Qt LGPL Exception
## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
##
## GNU General Public License Usage
-## Alternatively, this file may be used under the terms of the GNU General
-## Public License version 3.0 as published by the Free Software Foundation
-## and appearing in the file LICENSE.GPL included in the packaging of this
-## file. Please review the following information to ensure the GNU General
-## Public License version 3.0 requirements will be met:
-## http://www.gnu.org/copyleft/gpl.html.
-##
-## Other Usage
-## Alternatively, this file may be used in accordance with the terms and
-## conditions contained in a signed written agreement between you and Nokia.
-##
-##
-##
-##
+## Alternatively, this file may be used under the terms of the GNU
+## General Public License version 3.0 as published by the Free Software
+## Foundation and appearing in the file LICENSE.GPL included in the
+## packaging of this file. Please review the following information to
+## ensure the GNU General Public License version 3.0 requirements will be
+## met: http://www.gnu.org/copyleft/gpl.html.
##
##
## $QT_END_LICENSE$
echo "$2" "$eq" "$3" >> "$QMAKE_VARS_FILE"
}
+shellArgumentListToQMakeListHelper()
+{
+ local retval
+ for arg in "$@"; do retval="$retval \"$arg\""; done
+ echo "$retval"
+}
+
+# Convert a string usable on a shell command line into word-by-word quoted
+# qmake list.
+shellArgumentListToQMakeList()
+{
+ # eval is needed for the shell to interpret the backslash escape sequences
+ eval shellArgumentListToQMakeListHelper "$@"
+}
+
# Helper function for getQMakeConf. It parses include statements in
# qmake.conf and prints out the expanded file
getQMakeConf1()
fi
getQMakeConf1 "$conf_file"
;;
+ *load\(device_config\)*)
+ conf_file="$DEVICE_VARS_FILE"
+ if [ ! -f "$conf_file" ]; then
+ echo "WARNING: Unable to find file $conf_file" >&2
+ continue
+ fi
+ getQMakeConf1 "$conf_file"
+ ;;
*)
echo "$line"
;;
compilerSupportsFlag "$lflags" >/dev/null 2>&1
}
+# $1: newline-separated list of default paths
+# stdin: input path
+# stdout: input path or nothing
+filterDefaultPaths()
+{
+ local path
+ path=`cat`
+ echo "$1" | grep "^$path\$" > /dev/null || echo "$path"
+}
+
+filterIncludePath()
+{
+ filterDefaultPaths "$DEFAULT_INCDIRS"
+}
+
+filterLibraryPath()
+{
+ filterDefaultPaths "$DEFAULT_LIBDIRS"
+}
+
+filterPathOptionsHelper()
+{
+ local flag defpaths sep p path
+ flag=$1; shift
+ defpaths=$1; shift
+ sep=
+ for p in "$@"; do
+ path=${p#$flag}
+ if [ "x$path" != "x$p" ]; then
+ path=`echo "$path" | filterDefaultPaths "$defpaths"`
+ test -z "$path" && continue
+ fi
+ # Re-quote for shell & qmake
+ p=`echo "$p" | sed 's,[^ ]* .*,"&",g'`
+ printf "%s%s" "$sep" "$p"
+ sep=" "
+ done
+ echo
+}
+
+# $1: flag
+# $2: newline-separated list of default paths
+# stdin: list of command line options
+# sdout: stdin without the options naming default paths
+filterPathOptions()
+{
+ # The eval does escape interpretation for us
+ eval filterPathOptionsHelper $1 "\"$2\"" "`cat`"
+}
+
+filterIncludeOptions()
+{
+ filterPathOptions -I "$DEFAULT_INCDIRS"
+}
+
+filterLibraryOptions()
+{
+ filterPathOptions -L "$DEFAULT_LIBDIRS"
+}
+
#-------------------------------------------------------------------------------
# device options
#-------------------------------------------------------------------------------
echo "$2" "$eq" "$3" >> "$DEVICE_VARS_FILE"
}
+resolveDeviceMkspec()
+{
+ result=$(find "$relpath/mkspecs/devices/" -type d -name "*$1*" | sed "s,^$relpath/mkspecs/,,")
+ match_count=$(echo "$result" | wc -w)
+ if [ "$match_count" -gt 1 ]; then
+ echo >&2 "Error: Multiple matches for device '$1'. Candidates are:"
+ tabbed_result=$(echo "$result" | sed "s,^, ,")
+ echo >&2 "$tabbed_result"
+ echo "undefined"
+ elif [ "$match_count" -eq 0 ]; then
+ echo >&2 "Error: No device matching '$1'"
+ echo "undefined"
+ else
+ echo "$result"
+ fi
+}
+
#-------------------------------------------------------------------------------
# operating system detection
#-------------------------------------------------------------------------------
exit 1
fi
-QT_PACKAGEDATE=`grep '^# *define *QT_PACKAGEDATE_STR' "$relpath"/src/corelib/global/qglobal.h | sed -e 's,^# *define *QT_PACKAGEDATE_STR *"\([^ ]*\)"$,\1,' -e s,-,,g`
-if [ -z "$QT_PACKAGEDATE" ]; then
- echo "Unable to determine package date from qglobal.h: '$QT_PACKAGEDATE'"
- echo "Cannot proceed"
- exit 1
-fi
-
#-------------------------------------------------------------------------------
# check the license
#-------------------------------------------------------------------------------
echo
echo "You are using an old license file."
echo
- echo "Please install the license file supplied by Nokia,"
+ echo "Please install the license file supplied by Digia,"
echo "or install the Qt Open Source Edition if you intend to"
echo "develop free software."
exit 1
echo
echo "You are not licensed for the $Platform platform."
echo
- echo "Please contact qt-info@nokia.com to upgrade your license to"
- echo "include the $Platform platform, or install the Qt Open Source Edition"
- echo "if you intend to develop free software."
+ echo "Please use the contact form at http://qt.digia.com/contact-us"
+ echo "to upgrade your license to include the $Platform platform, or install"
+ echo "the Qt Open Source Edition if you intend to develop free software."
exit 1
;;
esac
# initalize internal variables
CFG_CONFIGURE_EXIT_ON_ERROR=yes
CFG_PROFILE=no
+CFG_STRIP=yes
CFG_GUI=auto # (yes|no|auto)
CFG_WIDGETS=yes
CFG_QCONFIG=full
CFG_DEBUG=auto
CFG_MYSQL_CONFIG=
CFG_DEBUG_RELEASE=no
+CFG_FORCEDEBUGINFO=no
CFG_SHARED=yes
CFG_SM=auto
CFG_XSHAPE=auto
CFG_FONTCONFIG=auto
CFG_LIBFREETYPE=auto
CFG_SQL_AVAILABLE=
-QT_DEFAULT_BUILD_PARTS="libs examples"
+QT_DEFAULT_BUILD_PARTS="libs tools examples"
CFG_BUILD_PARTS=""
CFG_NOBUILD_PARTS=""
CFG_RELEASE_QMAKE=no
# Target architecture
CFG_ARCH=
+CFG_CPUFEATURES=
# Host architecture, same as CFG_ARCH when not cross-compiling
CFG_HOST_ARCH=
+CFG_HOST_CPUFEATURES=
# Set when the -arch or -host-arch arguments are used
OPT_OBSOLETE_HOST_ARG=no
CFG_XCB_LIMITED=yes
CFG_EGLFS=auto
CFG_DIRECTFB=auto
+CFG_LINUXFB=auto
+CFG_KMS=auto
CFG_LIBUDEV=auto
CFG_OBSOLETE_WAYLAND=no
CFG_EVDEV=auto
CFG_ACCESSIBILITY=auto
CFG_IWMMXT=no
CFG_NEON=auto
-CFG_MIPS_DSP=yes
-CFG_MIPS_DSPR2=yes
+CFG_MIPS_DSP=auto
+CFG_MIPS_DSPR2=auto
CFG_CLOCK_GETTIME=auto
CFG_CLOCK_MONOTONIC=auto
CFG_MREMAP=auto
CFG_INOTIFY=auto
CFG_RPATH=yes
CFG_FRAMEWORK=auto
-MAC_CONFIG_TEST_COMMANDLINE= # used to make the configure tests run with the correct arch's and SDK settings
CFG_MAC_HARFBUZZ=no
-CFG_SXE=no
CFG_PREFIX_INSTALL=yes
CFG_SDK=
+DEFINES=
D_FLAGS=
I_FLAGS=
L_FLAGS=
RPATH_FLAGS=
-l_FLAGS=
W_FLAGS=
QCONFIG_FLAGS=
XPLATFORM= # This seems to be the QMAKESPEC, like "linux-g++"
XPLATFORM_MINGW=no # Whether target platform is MinGW (win32-g++*)
XPLATFORM_MAEMO=no
+XPLATFORM_QNX=no
PLATFORM=$QMAKESPEC
QT_CROSS_COMPILE=no
OPT_CONFIRM_LICENSE=no
CFG_ALSA=auto
CFG_PULSEAUDIO=auto
CFG_COREWLAN=auto
-CFG_NOPROCESS=no
+CFG_PROCESS=yes
CFG_ICU=auto
CFG_FORCE_ASSERTS=no
CFG_PCRE=auto
QPA_PLATFORM_GUARD=yes
+CFG_CXX11=auto
# initalize variables used for installation
QT_INSTALL_PREFIX=
QT_INSTALL_EXAMPLES=
QT_INSTALL_TESTS=
CFG_SYSROOT=
+CFG_GCC_SYSROOT="yes"
QT_HOST_PREFIX=
QT_HOST_BINS=
QT_HOST_DATA=
VAR=`echo $1 | sed "s,^-no-\(.*\),\1,"`
VAL=no
;;
- #Qt style yes options
- -profile|-shared|-static|-sm|-xinerama|-xshape|-xsync|-xinput|-xinput2|-egl|-reduce-exports|-pch|-separate-debug-info|-freetype|-xcursor|-xfixes|-xrandr|-xrender|-mitshm|-fontconfig|-xkb|-xcb|-eglfs|-directfb|-nis|-dbus|-dbus-linked|-glib|-gstreamer|-gtkstyle|-cups|-iconv|-largefile|-h|-help|-v|-verbose|-debug|-release|-fast|-accessibility|-confirm-license|-gnumake|-framework|-debug-and-release|-harfbuzz|-prefix-install|-silent|-optimized-qmake|-reduce-relocations|-sse|-openssl|-openssl-linked|-phonon-backend|-audio-backend|-qml-debug|-javascript-jit|-rpath|-pkg-config|-force-pkg-config|-icu|-force-asserts|-testcocoon)
- VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
- VAL=yes
- ;;
#Qt style options that pass an argument
- -qconfig)
- CFG_QCONFIG="$VAL"
- VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
- shift
- VAL=$1
- ;;
- -prefix|-docdir|-headerdir|-plugindir|-importdir|-datadir|-libdir|-bindir|-translationdir|-sysconfdir|-examplesdir|-testsdir|-depths|-make|-nomake|-platform|-xplatform|-device|-device-option|-sdk|-arch|-host-arch|-mysql_config|-sysroot|-hostdatadir|-hostbindir|-qpa)
+ -prefix|-docdir|-headerdir|-plugindir|-importdir|-datadir|-libdir|-bindir|-translationdir|-sysconfdir|-examplesdir|-testsdir|-depths|-make|-nomake|-platform|-xplatform|-device|-device-option|-sdk|-arch|-host-arch|-mysql_config|-sysroot|-hostdatadir|-hostbindir|-qpa|-qconfig)
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
shift
VAL="$1"
VAL=`echo $1 | sed 's,-R,,'`
fi
;;
- -l?*)
+ -l?*|-l)
VAR="add_link"
- VAL=`echo $1 | sed 's,-l,,'`
+ if [ "$1" = "-l" ]; then
+ shift
+ VAL="$1"
+ else
+ VAL=`echo $1 | sed 's,-l,,'`
+ fi
;;
-F?*|-F)
VAR="add_fpath"
VAR="add_warn"
VAL="$1"
;;
+ #General options, including Qt style yes options
-*)
VAR=`echo $1 | sed "s,^-\(.*\),\1,"`
- VAL="unknown"
+ VAL="yes"
;;
*)
UNKNOWN_ARG=yes
sysroot)
CFG_SYSROOT="$VAL"
;;
+ gcc-sysroot)
+ CFG_GCC_SYSROOT="$VAL"
+ ;;
bindir)
QT_INSTALL_BINS="$VAL"
;;
- sxe)
- CFG_SXE="$VAL"
- ;;
sse)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_SSE="$VAL"
UNKNOWN_OPT=yes
fi
;;
+ strip)
+ if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
+ CFG_STRIP=$VAL
+ else
+ UNKNOWN_OPT=yes
+ fi
+ ;;
testcocoon)
if [ "$VAL" = "yes" ]; then
QTCONFIG_CONFIG="$QTCONFIG_CONFIG testcocoon"
;;
xplatform)
XPLATFORM="$VAL"
- case `basename "$XPLATFORM"` in win32-g++*) XPLATFORM_MINGW=yes;; esac
+ case `basename "$XPLATFORM"` in win32-g++*)
+ XPLATFORM_MINGW=yes
+ CFG_RPATH=no
+ CFG_REDUCE_EXPORTS=no
+ ;;
+ esac
;;
device)
- XPLATFORM="devices/$VAL"
+ XPLATFORM=`resolveDeviceMkspec $VAL`
+ [ "$XPLATFORM" = "undefined" ] && exit 101
;;
device-option)
DEV_VAR=`echo $VAL | sed "s,^\(.*\)=.*,\1,"`
debug)
CFG_DEBUG="$VAL"
;;
+ force-debug-info)
+ CFG_FORCEDEBUGINFO="$VAL"
+ ;;
developer-build|commercial|opensource)
# These switches have been dealt with already
;;
UNKNOWN_OPT=yes
fi
;;
+ linuxfb)
+ if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
+ CFG_LINUXFB="$VAL"
+ else
+ UNKNOWN_OPT=yes
+ fi
+ ;;
+ kms)
+ if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
+ CFG_KMS="$VAL"
+ else
+ UNKNOWN_OPT=yes
+ fi
+ ;;
libudev)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
CFG_LIBUDEV="$VAL"
fi
;;
add_define)
- D_FLAGS="$D_FLAGS \"$VAL\""
+ DEFINES="$DEFINES \"$VAL\""
+ D_FLAGS="$D_FLAGS -D\"$VAL\""
;;
add_ipath)
I_FLAGS="$I_FLAGS -I\"${VAL}\""
RPATH_FLAGS="$RPATH_FLAGS \"${VAL}\""
;;
add_link)
- l_FLAGS="$l_FLAGS -l\"${VAL}\""
+ L_FLAGS="$L_FLAGS -l\"${VAL}\""
;;
add_fpath)
if [ "$BUILD_ON_MAC" = "yes" ]; then
;;
add_framework)
if [ "$BUILD_ON_MAC" = "yes" ]; then
- l_FLAGS="$l_FLAGS -framework \"${VAL}\""
+ L_FLAGS="$L_FLAGS -framework \"${VAL}\""
else
UNKNOWN_OPT=yes
fi
silent)
CFG_SILENT="$VAL"
;;
- phonon-backend)
- if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
- CFG_PHONON_BACKEND="$VAL"
- else
- UNKNOWN_OPT=yes
- fi
- ;;
dont-process)
- CFG_NOPROCESS=yes
+ CFG_PROCESS=no
;;
process)
- CFG_NOPROCESS=no
+ CFG_PROCESS=partial
+ ;;
+ fully-process)
+ CFG_PROCESS=full
;;
audio-backend)
if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
UNKNOWN_OPT=yes
fi
;;
+ c++11)
+ if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ]; then
+ CFG_CXX11="$VAL"
+ else
+ UNKNOWN_OPT=yes
+ fi
+ ;;
*)
UNKNOWN_OPT=yes
;;
# save a pre-existing mkspecs/modules dir
test -d "$outpath/mkspecs/modules" && \
mv "$outpath/mkspecs/modules" "$outpath/mkspecs-modules"
+ # ditto for mkspecs/modules-inst
+ test -d "$outpath/mkspecs/modules-inst" && \
+ mv "$outpath/mkspecs/modules-inst" "$outpath/mkspecs-modules-inst"
# symlink the mkspecs directory
mkdir -p "$outpath/mkspecs"
ShadowMkspecs modules
fi
+ # The modules-inst dir is not quite as special, but still.
+ if test -d "$outpath/mkspecs-modules-inst"; then
+ rm -rf "$outpath/mkspecs/modules-inst"
+ mv "$outpath/mkspecs-modules-inst" "$outpath/mkspecs/modules-inst"
+ fi
+
# symlink the doc directory
rm -rf "$outpath/doc"
ln -s "$relpath/doc" "$outpath/doc"
;;
*)
if [ "$OPT_HELP" != "yes" ]; then
- echo
- for p in $PLATFORMS; do
- echo " $relconf $* -platform $p"
- done
echo >&2
echo " The build script does not currently recognize all" >&2
echo " platforms supported by Qt." >&2
esac
fi
-PLATFORMS=`find "$relpath/mkspecs/" -type f | grep -v qws | sed "s,$relpath/mkspecs/qws/,,"`
-
[ -z "$XPLATFORM" ] && XPLATFORM="$PLATFORM"
case `basename "$XPLATFORM"` in win32-g++*) XPLATFORM_MINGW=yes;; esac
-case "$XPLATFORM" in linux-g++-maemo) XPLATFORM_MAEMO=yes;; esac
-case "$XPLATFORM" in qnx-*) XPLATFORM_QNX=yes;; esac
+case "$XPLATFORM" in *-maemo*) XPLATFORM_MAEMO=yes;; esac
+case "$XPLATFORM" in *qnx-*|*blackberry-*) XPLATFORM_QNX=yes;; esac
if [ -d "$PLATFORM" ]; then
QMAKESPEC="$PLATFORM"
echo
echo " $XQMAKESPEC/qplatformdefs.h"
echo
- echo " Please contact qt-info@nokia.com."
+ echo " Please use the contact form at http://qt.digia.com/contact-us"
echo
exit 2
fi
echo ""
echo "You are not licensed for Qt for `basename $XPLATFORM`."
echo ""
- echo "Please contact qt-info@nokia.com to upgrade your license to"
- echo "include this platform, or install the Qt Open Source Edition"
- echo "if you intend to develop free software."
+ echo "Please use the contact form at http://qt.digia.com/contact-us"
+ echo "to upgrade your license to include this platform, or install"
+ echo "the Qt Open Source Edition if you intend to develop free software."
exit 1
;;
esac
fi
fi
if [ "$CFG_DEBUG_RELEASE" = "yes" ]; then
- QT_CONFIG="$QT_CONFIG build_all"
+ QT_CONFIG="$QT_CONFIG build_all debug_and_release"
fi
-# pass on $CFG_SDK to the configure tests.
-if [ '!' -z "$CFG_SDK" ]; then
- MAC_CONFIG_TEST_COMMANDLINE="$MAC_CONFIG_TEST_COMMANDLINE -sdk $CFG_SDK"
+if [ "$CFG_FORCEDEBUGINFO" = "yes" ]; then
+ QT_CONFIG="$QT_CONFIG force_debug_info"
+fi
+
+# pass on $CFG_SDK to the arch/configure tests.
+if [ -n "$CFG_SDK" ]; then
+ MAC_SDK_FLAG="-sdk $CFG_SDK"
+else
+ MAC_SDK_FLAG=
fi
# find the default framework value
exit 1
fi
fi
+TEST_COMPILER_CXXFLAGS=`getXQMakeConf QMAKE_CXXFLAGS`
+
+GCC_MACHINE_DUMP=
+case "$TEST_COMPILER" in *g++) GCC_MACHINE_DUMP=$($TEST_COMPILER -dumpmachine);; esac
+if [ -n "$GCC_MACHINE_DUMP" ]; then
+ DeviceVar set GCC_MACHINE_DUMP $($TEST_COMPILER -dumpmachine)
+fi
-if [ -n "$CFG_SYSROOT" ]; then
+if [ -n "$CFG_SYSROOT" ] && [ "$CFG_GCC_SYSROOT" = "yes" ]; then
SYSROOT_FLAG="--sysroot=$CFG_SYSROOT"
else
SYSROOT_FLAG=
fi
-export SYSROOT_FLAG # used by config.tests/unix/compile.test
+export SYSROOT_FLAG # used by config.tests/unix/{compile.test,arch.test}
# auto-detect precompiled header support
if [ "$CFG_PRECOMPILE" = "auto" ]; then
# auto-detect support for separate debug info in objcopy
if [ "$CFG_SEPARATE_DEBUG_INFO" != "no" ] && [ "$CFG_SHARED" = "yes" ]; then
- TEST_COMPILER_CFLAGS=`getXQMakeConf QMAKE_CFLAGS`
- TEST_COMPILER_CXXFLAGS=`getXQMakeConf QMAKE_CXXFLAGS`
TEST_OBJCOPY=`getXQMakeConf QMAKE_OBJCOPY`
COMPILER_WITH_FLAGS="$TEST_COMPILER $TEST_COMPILER_CXXFLAGS"
- COMPILER_WITH_FLAGS=`echo "$COMPILER_WITH_FLAGS" | sed -e "s%\\$\\$QMAKE_CFLAGS%$TEST_COMPILER_CFLAGS%g"`
if "$unixtests/objcopy.test" "$COMPILER_WITH_FLAGS" "$TEST_OBJCOPY" "$OPT_VERBOSE"; then
CFG_SEPARATE_DEBUG_INFO=no
else
CFG_FRAMEWORK=no
fi
+# auto-detect default include and library search paths
+gccout=`$TEST_COMPILER $SYSROOT_FLAG $TEST_COMPILER_CXXFLAGS -xc++ -E -v - < /dev/null 2>&1 > /dev/null`
+libdirs=`echo "$gccout" | sed -n -e 's/^LIBRARY_PATH=\(.*\)/\1/p'`
+DEFAULT_LIBDIRS=`IFS=:; for i in $libdirs; do test -d "$i" && cd "$i" && pwd; done | sort -u`
+DEFAULT_INCDIRS=`echo "$gccout" | awk '
+/^End of search/ { yup=0 }
+yup { print substr($0, 2) }
+/^\#include </ { yup=1 }
+' | sort -u`
+test -z "$DEFAULT_LIBDIRS" && DEFAULT_LIBDIRS="/lib
+/usr/lib"
+test -z "$DEFAULT_INCDIRS" && DEFAULT_INCDIRS="/usr/include
+/usr/local/include"
+
#setup the build parts
if [ -z "$CFG_BUILD_PARTS" ]; then
CFG_BUILD_PARTS="$QT_DEFAULT_BUILD_PARTS"
if [ "$CFG_PREFIX_INSTALL" = "no" ]; then
if [ "$BUILD_ON_MAC" = "yes" ]; then
if [ "$CFG_FRAMEWORK" = "yes" ]; then
- QT_INSTALL_LIBS="/Libraries/Frameworks"
+ QT_INSTALL_LIBS="/Library/Frameworks"
fi
fi
fi
DFBY="*"
DFBN=" "
fi
+
+ if [ "$CFG_LINUXFB" = "no" ]; then
+ LFBY=" "
+ LFBN="*"
+ else
+ LFBY="*"
+ LFBN=" "
+ fi
+
+ if [ "$CFG_KMS" = "no" ]; then
+ KMSY=" "
+ KMSN="*"
+ else
+ KMSY="*"
+ KMSN=" "
+ fi
+
if [ "$CFG_XINPUT2" = "no" ]; then
X2Y=" "
X2N="*"
fi
cat <<EOF
-Usage: $relconf [-h] [-prefix <dir>] [-prefix-install] [-bindir <dir>] [-libdir <dir>]
- [-docdir <dir>] [-headerdir <dir>] [-plugindir <dir> ] [-importdir <dir>] [-datadir <dir>]
- [-translationdir <dir>] [-sysconfdir <dir>] [-examplesdir <dir>] [-testsdir <dir>]
- [-release] [-debug] [-debug-and-release]
- [-developer-build] [-shared] [-static] [-no-fast] [-fast] [-no-largefile]
- [-largefile] [-no-accessibility] [-accessibility] [-no-sql-<driver>] [-sql-<driver>]
- [-plugin-sql-<driver>] [-system-sqlite]
- [-platform] [-D <string>] [-I <string>] [-L <string>] [-help]
- [-qt-zlib] [-system-zlib] [-no-gif] [-no-libpng] [-qt-libpng] [-system-libpng]
- [-no-libjpeg] [-qt-libjpeg] [-system-libjpeg] [-make <part>]
- [-nomake <part>] [-R <string>] [-l <string>] [-no-rpath] [-rpath] [-continue]
- [-verbose] [-v] [-silent] [-no-nis] [-nis] [-no-cups] [-cups] [-no-iconv]
- [-iconv] [-no-pch] [-pch] [-no-dbus] [-dbus] [-dbus-linked] [-no-gui]
- [-no-separate-debug-info] [-no-sse2]
- [-no-sse3] [-no-ssse3] [-no-sse4.1] [-no-sse4.2] [-no-avx] [-no-neon]
- [-qtnamespace <namespace>] [-qtlibinfix <infix>] [-separate-debug-info]
- [-no-phonon-backend] [-phonon-backend] [-no-media-backend] [-media-backend]
- [-no-audio-backend] [-audio-backend]
- [-no-javascript-jit] [-javascript-jit] [-no-qml-debug] [-qml-debug]
- [-no-optimized-qmake] [-optimized-qmake]
- [-no-openssl] [-openssl] [-openssl-linked]
- [-no-gtkstyle] [-gtkstyle]
- [-qt-pcre] [-system-pcre]
- [-device <name>] [-device-option <key=value>]
- [additional platform specific options (see below)]
-
+Usage: $relconf [options]
Installation options:
Qt. This will install into
$QT_INSTALL_PREFIX, if this option is
disabled then some platforms will attempt a
- "system" install by placing default values to
- be placed in a system location other than
- PREFIX.
+ "system" install by placing default values
+ in a system location other than PREFIX.
You may use these to separate different parts of the install:
-debug-and-release . Compile and link two versions of Qt, with and without
debugging turned on (Mac only).
+ -force-debug-info .. Create symbol files for release builds.
+
-developer-build ... Compile and link Qt with Qt developer options (including auto-tests exporting)
-opensource ........ Compile and link the Open-Source Edition of Qt.
-commercial ........ Compile and link the Commercial Edition of Qt.
+ -no-c++11 .......... Do not compile Qt with C++11 support enabled.
+ + -c++11 ............. Compile Qt with C++11 support enabled.
* -shared ............ Create and use shared Qt libraries.
-static ............ Create and use static Qt libraries.
+ * -process ........... Generate only a top-level Makefile.
+ -fully-process ..... Generate Makefiles for the entire Qt tree.
+ -dont-process ...... Do not generate any Makefiles.
+
* -no-fast ........... Configure Qt normally by generating Makefiles for all
project files.
-fast .............. Configure Qt quickly by generating Makefiles only for
+ -largefile ......... Enables Qt to access files larger than 4 GB.
-no-accessibility .. Do not compile Accessibility support.
- * -accessibility ..... Compile Accessibility support.
+ + -accessibility ..... Compile Accessibility support.
-no-sql-<driver> ... Disable SQL <driver> entirely.
-qt-sql-<driver> ... Enable a SQL <driver> in the QtSql library, by default
-system-sqlite ..... Use sqlite from the operating system.
- -no-phonon-backend.. Do not build the platform phonon plugin.
- + -phonon-backend..... Build the platform phonon plugin.
-
-no-javascript-jit . Do not build the JavaScriptCore JIT compiler.
+ -javascript-jit .... Build the JavaScriptCore JIT compiler.
$CIN -no-iconv .......... Do not compile support for iconv(3).
$CIY -iconv ............. Compile support for iconv(3).
+ -no-icu ............ Do not compile support for ICU libraries.
+ + -icu ............... Compile support for ICU libraries.
+
+ -no-strip .......... Do not strip binaries and libraries of unneeded symbols.
+ * -strip ............. Strip binaries and libraries of unneeded symbols when installing.
+
$PHN -no-pch ............ Do not use precompiled header support.
$PHY -pch ............... Use precompiled header support.
$DFBN -no-directfb ....... Do not compile DirectFB support.
$DFBY -directfb .......... Compile DirectFB support.
+ $LFBN -no-linuxfb ........ Do not compile Linux Framebuffer support.
+ $LFBY -linuxfb ........... Compile Linux Framebuffer support.
+
+ $KMSN -no-kms ............ Do not compile KMS support.
+ $KMSY -kms ............... Compile KMS support (Requires EGL and OpenGL ES 2 support).
+
-qpa <name> ......... Sets the default QPA platform (e.g xcb, cocoa, windows).
-xplatform target ... The target platform when cross-compiling.
- -sysroot <dir> ...... Sets <dir> as the target compiler's and qmake's sysroot.
+ -sysroot <dir> ...... Sets <dir> as the target compiler's and qmake's sysroot and also sets pkg-config paths.
+ -no-gcc-sysroot ..... When using -sysroot, it disables the passing of --sysroot to the compiler
-no-feature-<feature> Do not compile in <feature>.
-feature-<feature> .. Compile in <feature>. The available features
if [ "$Today" -gt "$ExpiryDate" ]; then
case "$LicenseType" in
Commercial|Academic|Educational)
- if [ "$QT_PACKAGEDATE" -gt "$ExpiryDate" ]; then
- echo
- echo "NOTICE NOTICE NOTICE NOTICE"
- echo
- echo " Your support and upgrade period has expired."
- echo
- echo " You are no longer licensed to use this version of Qt."
- echo " Please contact qt-info@nokia.com to renew your support"
- echo " and upgrades for this license."
- echo
- echo "NOTICE NOTICE NOTICE NOTICE"
- echo
- exit 1
- else
- echo
- echo "WARNING WARNING WARNING WARNING"
- echo
- echo " Your support and upgrade period has expired."
- echo
- echo " You may continue to use your last licensed release"
- echo " of Qt under the terms of your existing license"
- echo " agreement. But you are not entitled to technical"
- echo " support, nor are you entitled to use any more recent"
- echo " Qt releases."
- echo
- echo " Please contact qt-info@nokia.com to renew your"
- echo " support and upgrades for this license."
- echo
- echo "WARNING WARNING WARNING WARNING"
- echo
- sleep 3
- fi
+ echo
+ echo "WARNING WARNING WARNING WARNING"
+ echo
+ echo " Your support and upgrade period has expired."
+ echo
+ echo " You may continue to use your last licensed release"
+ echo " of Qt under the terms of your existing license"
+ echo " agreement. But you are not entitled to technical"
+ echo " support, nor are you entitled to use any more recent"
+ echo " Qt releases."
+ echo
+ echo " Please use the contact form at http://qt.digia.com/contact-us"
+ echo " to renew your support and upgrades for this license."
+ echo
+ echo "WARNING WARNING WARNING WARNING"
+ echo
+ sleep 3
;;
Evaluation|*)
echo
echo " Your Evaluation license has expired."
echo
echo " You are no longer licensed to use this software. Please"
- echo " contact qt-info@nokia.com to purchase license, or install"
- echo " the Qt Open Source Edition if you intend to develop free"
- echo " software."
+ echo " use the contact form at http://qt.digia.com/contact-us to"
+ echo " purchase license, or install the Qt Open Source Edition"
+ echo " if you intend to develop free software."
echo
echo "NOTICE NOTICE NOTICE NOTICE"
echo
# -----------------------------------------------------------------------------
if [ "$LicenseType" = "Evaluation" ]; then
EVALKEY=qt_qevalkey=$LicenseKeyExt
-elif echo "$D_FLAGS" | grep QT_EVAL >/dev/null 2>&1; then
+elif echo "$DEFINES" | grep QT_EVAL >/dev/null 2>&1; then
EVALKEY=qt_qevalkey=
fi
# symlink includes
if [ -n "$PERL" ] && [ -x "$relpath/bin/syncqt" ]; then
- SYNCQT_OPTS=
- [ "$CFG_DEV" = "yes" ] && SYNCQT_OPTS="$SYNCQT_OPTS -check-includes"
- if [ "$OPT_SHADOW" = "yes" ]; then
- "$outpath/bin/syncqt" $SYNCQT_OPTS "$relpath" || exit 1
- elif [ "$CFG_DEV" = "yes" ] || [ ! -d $relpath/include ] || [ -d $relpath/.git ]; then
- QTDIR="$relpath" perl "$outpath/bin/syncqt" $SYNCQT_OPTS || exit 1
- fi
+ "$outpath/bin/syncqt" -minimal -module QtCore "$relpath" || exit 1
fi
# $1: input variable name (awk regexp)
if true; then ###[ '!' -f "$outpath/bin/qmake" ];
echo "Creating qmake. Please wait..."
- OLD_QCONFIG_H=
- QCONFIG_H="$outpath/src/corelib/global/qconfig.h"
- QMAKE_QCONFIG_H="${QCONFIG_H}.qmake"
- if [ -f "$QCONFIG_H" ]; then
- OLD_QCONFIG_H=$QCONFIG_H
- mv -f "$OLD_QCONFIG_H" "${OLD_QCONFIG_H}.old"
- fi
-
- # create temporary qconfig.h for compiling qmake, if it doesn't exist
- # when building qmake, we use #defines for the install paths,
- # however they are real functions in the library
- if [ '!' -f "$QMAKE_QCONFIG_H" ]; then
- mkdir -p "$outpath/src/corelib/global"
- [ -f "$QCONFIG_H" ] && chmod +w "$QCONFIG_H"
- echo "/* All features enabled while building qmake */" >"$QMAKE_QCONFIG_H"
- fi
-
- mv -f "$QMAKE_QCONFIG_H" "$QCONFIG_H"
-
#mkspecs/default is used as a (gasp!) default mkspec so QMAKESPEC needn't be set once configured
- rm -rf mkspecs/default
+ rm -rf mkspecs/default mkspecs/default-host
ln -s `echo $XQMAKESPEC | sed "s,^${relpath}/mkspecs/,,"` mkspecs/default
+ ln -s `echo $QMAKESPEC | sed "s,^${relpath}/mkspecs/,,"` mkspecs/default-host
mkdir -p "$outpath/qmake" || exit
# fix makefiles
for mkfile in GNUmakefile Makefile; do
fi
fi
if [ '!' -z "$D_FLAGS" ]; then
- for DEF in $D_FLAGS; do
- EXTRA_CFLAGS="$EXTRA_CFLAGS \"-D${DEF}\""
- done
+ EXTRA_CFLAGS="$EXTRA_CFLAGS $D_FLAGS"
fi
QMAKE_BIN_DIR="$QT_INSTALL_BINS"
[ -z "$QMAKE_BIN_DIR" ] && QMAKE_BIN_DIR="${QT_INSTALL_PREFIX}/bin"
fi
done
- QMAKE_BUILD_ERROR=no
- (cd "$outpath/qmake"; "$MAKE") || QMAKE_BUILD_ERROR=yes
- [ '!' -z "$QCONFIG_H" ] && mv -f "$QCONFIG_H" "$QMAKE_QCONFIG_H" #move qmake's qconfig.h to qconfig.h.qmake
- [ '!' -z "$OLD_QCONFIG_H" ] && mv -f "${OLD_QCONFIG_H}.old" "$OLD_QCONFIG_H" #put back qconfig.h
- [ "$QMAKE_BUILD_ERROR" = "yes" ] && exit 2
+ (cd "$outpath/qmake"; "$MAKE") || exit 2
fi # Build qmake
#-------------------------------------------------------------------------------
+# create a qt.conf for the Qt build tree itself
+#-------------------------------------------------------------------------------
+
+QTCONFFILE="$outpath/bin/qt.conf"
+cat > "$QTCONFFILE" <<EOF
+[EffectivePaths]
+Prefix=..
+EOF
+
+#-------------------------------------------------------------------------------
+# write out device config before we run the test.
+#-------------------------------------------------------------------------------
+DEVICE_VARS_OUTFILE="$outpath/mkspecs/qdevice.pri"
+if cmp -s "$DEVICE_VARS_FILE" "$DEVICE_VARS_OUTFILE"; then
+ rm -f "$DEVICE_VARS_FILE"
+else
+ mv -f $DEVICE_VARS_FILE "$DEVICE_VARS_OUTFILE"
+ DEVICE_VARS_FILE="$DEVICE_VARS_OUTFILE"
+fi
+
+#-------------------------------------------------------------------------------
# Detect pkg-config
#-------------------------------------------------------------------------------
if [ -z "$PKG_CONFIG" ]; then
# See if PKG_CONFIG is set in the mkspec:
- PKG_CONFIG=`getXQMakeConf PKG_CONFIG`
+ PKG_CONFIG="`"$outpath/bin/qmake" -E -nocache -spec "$XQMAKESPEC" "CONFIG=" /dev/null 2>&1 | sed -n -e 's,^PKG_CONFIG = \(.*\),\1,p'`"
fi
if [ -z "$PKG_CONFIG" ]; then
PKG_CONFIG=`"$WHICH" pkg-config 2>/dev/null`
if [ -z "$PKG_CONFIG_LIBDIR" ]; then
if [ -n "$CFG_SYSROOT" ] && [ -d "$CFG_SYSROOT/usr/lib/pkgconfig" ]; then
PKG_CONFIG_LIBDIR=$CFG_SYSROOT/usr/lib/pkgconfig:$CFG_SYSROOT/usr/share/pkgconfig
+ if [ -n "$GCC_MACHINE_DUMP" ]; then
+ PKG_CONFIG_LIBDIR=$PKG_CONFIG_LIBDIR:$CFG_SYSROOT/usr/lib/$GCC_MACHINE_DUMP/pkgconfig
+ fi
export PKG_CONFIG_LIBDIR
echo >&2 "Note: PKG_CONFIG_LIBDIR automatically set to $PKG_CONFIG_LIBDIR"
elif [ "$CFG_PKGCONFIG" = "yes" ]; then
fi
#-------------------------------------------------------------------------------
-# write out device config before we run the test.
-#-------------------------------------------------------------------------------
-if cmp -s "$DEVICE_VARS_FILE" "$outpath/mkspecs/qdevice.pri"; then
- rm -f "$DEVICE_VARS_FILE"
-else
- mv -f $DEVICE_VARS_FILE "$outpath/mkspecs/qdevice.pri"
-fi
-
-#-------------------------------------------------------------------------------
# tests that need qmake
#-------------------------------------------------------------------------------
+# parameters: path, name, extra args
+compileTest()
+{
+ path=config.tests/$1
+ name=$2
+ shift 2
+ "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "$path" "$name" $I_FLAGS $D_FLAGS $L_FLAGS $MAC_SDK_FLAG "$@"
+}
+
#-------------------------------------------------------------------------------
# determine the target and host architectures
#-------------------------------------------------------------------------------
-# Use config.tests/arch/arch.pro to has the compiler tell us what the target architecture is
-CFG_ARCH=`OUTDIR="$outpath" "$outpath/bin/qmake" -spec "$XQMAKESPEC" -o /dev/null "$relpath/config.tests/arch/arch.pro" 2>&1 | sed -n -e 's,^Project MESSAGE:.*Architecture: \([a-zA-Z0-9_]*\).*,\1,p'`
-
+# Use config.tests/arch/arch.pro to have the compiler tell us what the target architecture is
+OUTFILE=$outpath/arch.result
+"$unixtests/arch.test" "$XQMAKESPEC" $OPT_VERBOSE "$relpath" "$outpath" "$OUTFILE" "CFG" $MAC_SDK_FLAG
+if [ $? -eq 0 ]; then
+ eval `cat "$OUTFILE"`
+else
+ echo
+ echo "Could not determine the target architecture!"
+ echo "Turn on verbose messaging (-v) to see the final report."
+fi
+rm -f "$OUTFILE" 2>/dev/null
[ -z "$CFG_ARCH" ] && CFG_ARCH="unknown"
+
if [ "$QMAKESPEC" != "$XQMAKESPEC" ]; then
# Do the same test again, using the host compiler
- CFG_HOST_ARCH=`OUTDIR="$outpath" "$outpath/bin/qmake" -spec "$QMAKESPEC" -o /dev/null "$relpath/config.tests/arch/arch.pro" 2>&1 | sed -n -e 's,^Project MESSAGE:.*Architecture: \([a-zA-Z0-9_]*\).*,\1,p'`
+ SYSROOT_FLAG= "$unixtests/arch.test" "$QMAKESPEC" $OPT_VERBOSE "$relpath" "$outpath" "$OUTFILE" "CFG_HOST" $MAC_SDK_FLAG
+ if [ $? -eq 0 ]; then
+ eval `cat "$OUTFILE"`
+ else
+ echo
+ echo "Could not determine the host architecture!"
+ echo "Turn on verbose messaging (-v) to see the final report."
+ fi
+ rm -f "$OUTFILE" 2>/dev/null
[ -z "$CFG_HOST_ARCH" ] && CFG_HOST_ARCH="unknown"
else
# not cross compiling, host == target
CFG_HOST_ARCH="$CFG_ARCH"
+ CFG_HOST_CPUFEATURES="$CFG_CPUFEATURES"
fi
+unset OUTFILE
if [ "$OPT_VERBOSE" = "yes" ]; then
echo "System architecture: '$CFG_ARCH'"
# functionality tests
#-------------------------------------------------------------------------------
+# Detect C++11 support
+if [ "$CFG_CXX11" != "no" ]; then
+ if compileTest common/c++11 "C++11"; then
+ CFG_CXX11="yes"
+ elif [ "$CFG_CXX11" != "auto" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
+ echo "C++11 support cannot be enabled due to functionality tests!"
+ echo " Turn on verbose messaging (-v) to $0 to see the final report."
+ echo " If you believe this message is in error you may use the continue"
+ echo " switch (-continue) to $0 to continue."
+ exit 101
+ else
+ CFG_CXX11="no"
+ fi
+fi
+
# detect availability of float math.h functions
-if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/floatmath "floatmath" $L_FLAGS $I_FLAGS $l_FLAGS; then
+if compileTest unix/floatmath "floatmath"; then
CFG_USE_FLOATMATH=yes
else
CFG_USE_FLOATMATH=no
# detect sse2 support
if [ "${CFG_SSE2}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse2 "sse2" $L_FLAGS $I_FLAGS $l_FLAGS "-msse2"; then
+ if compileTest common/sse2 "sse2"; then
CFG_SSE2=yes
else
CFG_SSE2=no
# detect sse3 support
if [ "${CFG_SSE3}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse3 "sse3" $L_FLAGS $I_FLAGS $l_FLAGS "-msse3"; then
+ if compileTest common/sse3 "sse3"; then
CFG_SSE3=yes
else
CFG_SSE3=no
# detect ssse3 support
if [ "${CFG_SSSE3}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/ssse3 "ssse3" $L_FLAGS $I_FLAGS $l_FLAGS "-mssse3"; then
+ if compileTest common/ssse3 "ssse3"; then
CFG_SSSE3=yes
else
CFG_SSSE3=no
# detect sse4.1 support
if [ "${CFG_SSE4_1}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse4_1 "sse4_1" $L_FLAGS $I_FLAGS $l_FLAGS "-msse4.1"; then
+ if compileTest common/sse4_1 "sse4_1"; then
CFG_SSE4_1=yes
else
CFG_SSE4_1=no
# detect sse4.2 support
if [ "${CFG_SSE4_2}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sse4_2 "sse4_2" $L_FLAGS $I_FLAGS $l_FLAGS "-msse4.2"; then
+ if compileTest common/sse4_2 "sse4_2"; then
CFG_SSE4_2=yes
else
CFG_SSE4_2=no
# detect avx support
if [ "${CFG_AVX}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/avx "avx" $L_FLAGS $I_FLAGS $l_FLAGS "-mavx"; then
+ if compileTest common/avx "avx"; then
case "$XQMAKESPEC" in
*g++*|*-clang*)
# Some clang versions produce internal compiler errors compiling Qt AVX code
CFG_AVX2=no
fi
if [ "${CFG_AVX2}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/avx2 "avx2" $L_FLAGS $I_FLAGS $l_FLAGS "-march=core-avx2"; then
+ if compileTest common/avx2 "avx2"; then
CFG_AVX2=yes
else
CFG_AVX2=no
# check iWMMXt support
if [ "$CFG_IWMMXT" = "yes" ]; then
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/iwmmxt "iwmmxt" $L_FLAGS $I_FLAGS $l_FLAGS "-mcpu=iwmmxt"
+ compileTest unix/iwmmxt "iwmmxt"
if [ $? != "0" ]; then
echo "The iWMMXt functionality test failed!"
echo " Please make sure your compiler supports iWMMXt intrinsics!"
# detect neon support
if [ "$CFG_ARCH" = "arm" ] && [ "${CFG_NEON}" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/neon "neon" $L_FLAGS $I_FLAGS $l_FLAGS "-mfpu=neon"; then
+ if compileTest unix/neon "neon"; then
CFG_NEON=yes
else
CFG_NEON=no
fi
# detect mips_dsp support
-if [ "${CFG_ARCH}" = "mips" ] && [ "${CFG_MIPS_DSP}" = "yes" ]; then
- CFG_MIPS_DSP=yes
+if [ "$CFG_ARCH" = "mips" ] && [ "${CFG_MIPS_DSP}" = "auto" ]; then
+ if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mips_dsp "mips_dsp" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS; then
+ CFG_MIPS_DSP=yes
else
- CFG_MIPS_DSP=no
+ CFG_MIPS_DSP=no
+ fi
+elif [ "$CFG_ARCH" != "mips" ]; then
+ CFG_MIPS_DSP=no
fi
# detect mips_dspr2 support
-if [ "${CFG_ARCH}" = "mips" ] && [ "${CFG_MIPS_DSPR2}" = "yes" ]; then
- CFG_MIPS_DSPR2=yes
+if [ "$CFG_ARCH" = "mips" ] && [ "${CFG_MIPS_DSPR2}" = "auto" ]; then
+ if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mips_dspr2 "mips_dspr2" $L_FLAGS $I_FLAGS $D_FLAGS $l_FLAGS; then
+ CFG_MIPS_DSPR2=yes
else
- CFG_MIPS_DSPR2=no
+ CFG_MIPS_DSPR2=no
+ fi
+elif [ "$CFG_ARCH" != "mips" ]; then
+ CFG_MIPS_DSPR2=no
fi
[ "$XPLATFORM_MINGW" = "yes" ] && QMakeVar add styles "windowsxp windowsvista"
ZLIB_FORCED=yes
fi
if [ "$CFG_ZLIB" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/zlib "zlib" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/zlib "zlib"; then
CFG_ZLIB=system
else
CFG_ZLIB=yes
fi
# detect jpeg
if [ "$CFG_LIBJPEG" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/libjpeg "libjpeg" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/libjpeg "libjpeg"; then
CFG_LIBJPEG=system
else
CFG_LIBJPEG=qt
# detect png
if [ "$CFG_LIBPNG" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/libpng "libpng" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/libpng "libpng"; then
CFG_LIBPNG=system
else
CFG_LIBPNG=qt
fi
fi
-# detect accessibility
-if [ "$CFG_ACCESSIBILITY" = "auto" ]; then
- CFG_ACCESSIBILITY=yes
-fi
-
if [ "$CFG_EGLFS" = "yes" ]; then
if [ "$CFG_EGL" = "no" ]; then
echo "The EGLFS plugin requires EGL support and cannot be built"
CFG_EGL=yes
fi
+if [ "$CFG_KMS" = "yes" ]; then
+ if [ "$CFG_EGL" = "no" ]; then
+ echo "The KMS plugin requires EGL support and cannot be built"
+ exit 101
+ fi
+ if [ "$CFG_OPENGL" != "es2" ]; then
+ echo "The KMS plugin requires OpenGL ES 2 support and cannot be built"
+ exit 101
+ fi
+fi
+
# auto-detect SQL-modules support
for _SQLDR in $CFG_SQL_AVAILABLE; do
case $_SQLDR in
if [ "$CFG_SQL_mysql" != "no" ]; then
[ -z "$CFG_MYSQL_CONFIG" ] && CFG_MYSQL_CONFIG=`"$WHICH" mysql_config`
if [ -x "$CFG_MYSQL_CONFIG" ]; then
- QT_CFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --include 2>/dev/null`
- QT_LFLAGS_MYSQL_R=`$CFG_MYSQL_CONFIG --libs_r 2>/dev/null`
- QT_LFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --libs 2>/dev/null`
+ QT_CFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --include 2>/dev/null | filterIncludeOptions`
+ QT_LFLAGS_MYSQL_R=`$CFG_MYSQL_CONFIG --libs_r 2>/dev/null | filterLibraryOptions`
+ QT_LFLAGS_MYSQL=`$CFG_MYSQL_CONFIG --libs 2>/dev/null | filterLibraryOptions`
QT_MYSQL_VERSION=`$CFG_MYSQL_CONFIG --version 2>/dev/null`
QT_MYSQL_VERSION_MAJOR=`echo $QT_MYSQL_VERSION | cut -d . -f 1`
fi
QT_CFLAGS_MYSQL=""
fi
else
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mysql_r "MySQL (thread-safe)" $QT_LFLAGS_MYSQL_R $L_FLAGS $QT_CFLAGS_MYSQL $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/mysql_r "MySQL (thread-safe)" $QT_LFLAGS_MYSQL_R $QT_CFLAGS_MYSQL; then
QMakeVar add CONFIG use_libmysqlclient_r
if [ "$CFG_SQL_mysql" = "auto" ]; then
CFG_SQL_mysql=plugin
fi
QT_LFLAGS_MYSQL="$QT_LFLAGS_MYSQL_R"
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mysql "MySQL (thread-unsafe)" $QT_LFLAGS_MYSQL $L_FLAGS $QT_CFLAGS_MYSQL $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ elif compileTest unix/mysql "MySQL (thread-unsafe)" $QT_LFLAGS_MYSQL $QT_CFLAGS_MYSQL; then
if [ "$CFG_SQL_mysql" = "auto" ]; then
CFG_SQL_mysql=plugin
fi
if [ "$CFG_SQL_psql" != "no" ]; then
# Be careful not to use native pg_config when cross building.
if [ "$XPLATFORM_MINGW" != "yes" ] && "$WHICH" pg_config >/dev/null 2>&1; then
- QT_CFLAGS_PSQL=`pg_config --includedir 2>/dev/null`
- QT_LFLAGS_PSQL=`pg_config --libdir 2>/dev/null`
+ QT_CFLAGS_PSQL=`pg_config --includedir 2>/dev/null | filterIncludePath`
+ QT_LFLAGS_PSQL=`pg_config --libdir 2>/dev/null | filterLibraryPath`
fi
[ -z "$QT_CFLAGS_PSQL" ] || QT_CFLAGS_PSQL="-I$QT_CFLAGS_PSQL"
[ -z "$QT_LFLAGS_PSQL" ] || QT_LFLAGS_PSQL="-L$QT_LFLAGS_PSQL"
# But, respect PSQL_LIBS if set
[ -z "$PSQL_LIBS" ] || QT_LFLAGS_PSQL="$PSQL_LIBS"
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/psql "PostgreSQL" $QT_LFLAGS_PSQL $L_FLAGS $QT_CFLAGS_PSQL $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/psql "PostgreSQL" $QT_LFLAGS_PSQL $QT_CFLAGS_PSQL; then
if [ "$CFG_SQL_psql" = "auto" ]; then
CFG_SQL_psql=plugin
fi
;;
odbc)
if [ "$CFG_SQL_odbc" != "no" ]; then
- if ( [ "$BUILD_ON_MAC" != "yes" ] || [ "$XPLATFORM_MINGW" = "yes" ] ) && "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/odbc "ODBC" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if ( [ "$BUILD_ON_MAC" != "yes" ] || [ "$XPLATFORM_MINGW" = "yes" ] ) && compileTest unix/odbc "ODBC"; then
if [ "$CFG_SQL_odbc" = "auto" ]; then
CFG_SQL_odbc=plugin
fi
else
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/iodbc "iODBC" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/iodbc "iODBC"; then
QT_LFLAGS_ODBC="-liodbc"
if [ "$CFG_SQL_odbc" = "auto" ]; then
CFG_SQL_odbc=plugin
;;
oci)
if [ "$CFG_SQL_oci" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/oci "OCI" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/oci "OCI"; then
if [ "$CFG_SQL_oci" = "auto" ]; then
CFG_SQL_oci=plugin
fi
if [ "$CFG_SQL_tds" != "no" ]; then
[ -z "$SYBASE" ] || QT_LFLAGS_TDS="-L$SYBASE/lib"
[ -z "$SYBASE_LIBS" ] || QT_LFLAGS_TDS="$QT_LFLAGS_TDS $SYBASE_LIBS"
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/tds "TDS" $QT_LFLAGS_TDS $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/tds "TDS" $QT_LFLAGS_TDS; then
if [ "$CFG_SQL_tds" = "auto" ]; then
CFG_SQL_tds=plugin
fi
;;
db2)
if [ "$CFG_SQL_db2" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/db2 "DB2" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/db2 "DB2"; then
if [ "$CFG_SQL_db2" = "auto" ]; then
CFG_SQL_db2=plugin
fi
;;
ibase)
if [ "$CFG_SQL_ibase" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/ibase "InterBase" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/ibase "InterBase"; then
if [ "$CFG_SQL_ibase" = "auto" ]; then
CFG_SQL_ibase=plugin
fi
;;
sqlite2)
if [ "$CFG_SQL_sqlite2" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sqlite2 "SQLite2" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/sqlite2 "SQLite2"; then
if [ "$CFG_SQL_sqlite2" = "auto" ]; then
CFG_SQL_sqlite2=plugin
fi
if [ -n "$PKG_CONFIG" ]; then
QT_CFLAGS_SQLITE=`$PKG_CONFIG --cflags sqlite3 2>/dev/null`
QT_LFLAGS_SQLITE=`$PKG_CONFIG --libs sqlite3 2>/dev/null`
+ else
+ QT_CFLAGS_SQLITE=
+ QT_LFLAGS_SQLITE="-lsqlite3 -lz"
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/sqlite "SQLite" $QT_LFLAGS_SQLITE $L_FLAGS $QT_CFLAGS_SQLITE $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/sqlite "SQLite" $QT_LFLAGS_SQLITE $QT_CFLAGS_SQLITE; then
if [ "$CFG_SQL_sqlite" = "auto" ]; then
CFG_SQL_sqlite=plugin
fi
# auto-detect NIS support
if [ "$CFG_NIS" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/nis "NIS" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/nis "NIS"; then
CFG_NIS=yes
else
if [ "$CFG_NIS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# auto-detect CUPS support
if [ "$CFG_CUPS" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/cups "Cups" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/cups "Cups"; then
CFG_CUPS=yes
else
if [ "$CFG_CUPS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
if [ "$CFG_ICONV" != "no" ]; then
if [ "$XPLATFORM_MINGW" = "yes" ]; then
CFG_ICONV=no
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" "$OPT_VERBOSE" "$relpath" "$outpath" "config.tests/unix/iconv" "POSIX iconv" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ elif compileTest unix/iconv "POSIX iconv"; then
CFG_ICONV=yes
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" "$OPT_VERBOSE" "$relpath" "$outpath" "config.tests/unix/sun-libiconv" "SUN libiconv" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ elif compileTest unix/sun-libiconv "SUN libiconv"; then
CFG_ICONV=sun
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" "$OPT_VERBOSE" "$relpath" "$outpath" "config.tests/unix/gnu-libiconv" "GNU libiconv" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ elif compileTest unix/gnu-libiconv "GNU libiconv"; then
CFG_ICONV=gnu
else
if [ "$CFG_ICONV" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
QT_CFLAGS_DBUS=`$PKG_CONFIG --cflags dbus-1 2>/dev/null`
QT_LIBS_DBUS=`$PKG_CONFIG --libs dbus-1 2>/dev/null`
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/dbus "D-Bus" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_DBUS $QT_LIBS_DBUS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/dbus "D-Bus" $QT_CFLAGS_DBUS $QT_LIBS_DBUS; then
[ "$CFG_DBUS" = "auto" ] && CFG_DBUS=yes
QMakeVar set QT_CFLAGS_DBUS "$QT_CFLAGS_DBUS"
QMakeVar set QT_LIBS_DBUS "$QT_LIBS_DBUS"
QT_CFLAGS_GLIB=`$PKG_CONFIG --cflags glib-2.0 gthread-2.0 2>/dev/null`
QT_LIBS_GLIB=`$PKG_CONFIG --libs glib-2.0 gthread-2.0 2>/dev/null`
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/glib "Glib" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GLIB $QT_LIBS_GLIB; then
+ if compileTest unix/glib "Glib" $QT_CFLAGS_GLIB $QT_LIBS_GLIB; then
CFG_GLIB=yes
QMakeVar set QT_CFLAGS_GLIB "$QT_CFLAGS_GLIB"
QMakeVar set QT_LIBS_GLIB "$QT_LIBS_GLIB"
QT_CFLAGS_GSTREAMER=`$PKG_CONFIG --cflags gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
QT_LIBS_GSTREAMER=`$PKG_CONFIG --libs gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/gstreamer "GStreamer" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER; then
+ if compileTest unix/gstreamer "GStreamer" $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER; then
CFG_GSTREAMER=yes
QMakeVar set QT_CFLAGS_GSTREAMER "$QT_CFLAGS_GSTREAMER"
QMakeVar set QT_LIBS_GSTREAMER "$QT_LIBS_GSTREAMER"
# auto-detect libicu support
if [ "$CFG_ICU" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/icu "ICU" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/icu "ICU"; then
[ "$CFG_ICU" = "auto" ] && CFG_ICU=yes
else
if [ "$CFG_ICU" = "auto" ]; then
QT_CFLAGS_PULSEAUDIO=`$PKG_CONFIG --cflags libpulse '>=' 0.9.10 libpulse-mainloop-glib 2>/dev/null`
QT_LIBS_PULSEAUDIO=`$PKG_CONFIG --libs libpulse '>=' 0.9.10 libpulse-mainloop-glib 2>/dev/null`
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/pulseaudio "PulseAudio" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_PULSEAUDIO $QT_LIBS_PULSEAUDIO; then
+ if compileTest unix/pulseaudio "PulseAudio" $QT_CFLAGS_PULSEAUDIO $QT_LIBS_PULSEAUDIO; then
CFG_PULSEAUDIO=yes
QMakeVar set QT_CFLAGS_PULSEAUDIO "$QT_CFLAGS_PULSEAUDIO"
QMakeVar set QT_LIBS_PULSEAUDIO "$QT_LIBS_PULSEAUDIO"
fi
fi
if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/opengl "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest x11/opengl "OpenGL"; then
CFG_OPENGL=desktop
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ elif compileTest unix/opengles2 "OpenGL ES 2.x"; then
CFG_OPENGL=es2
else
if [ "$CFG_OPENGL" = "yes" ]; then
hpux*)
# HP-UX have buggy glx headers; check if we really need to define the GLXFBConfig struct.
if [ "$CFG_OPENGL" = "desktop" ]; then
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/glxfbconfig "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
+ compileTest x11/glxfbconfig "OpenGL"
if [ $? != "0" ]; then
QMakeVar add DEFINES QT_DEFINE_GLXFBCONFIG_STRUCT
fi
esac
elif [ "$CFG_OPENGL" = "es2" ]; then
#OpenGL ES 2.x
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS
+ compileTest unix/opengles2 "OpenGL ES 2.x"
if [ $? != "0" ]; then
echo "The OpenGL ES 2.0 functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
fi
elif [ "$CFG_OPENGL" = "desktop" ]; then
# Desktop OpenGL support
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/opengl "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
+ compileTest x11/opengl "OpenGL"
if [ $? != "0" ]; then
echo "The OpenGL functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
case "$PLATFORM" in
hpux*)
# HP-UX have buggy glx headers; check if we really need to define the GLXFBConfig struct.
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/glxfbconfig "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
+ compileTest x11/glxfbconfig "OpenGL"
if [ $? != "0" ]; then
QMakeVar add DEFINES QT_DEFINE_GLXFBCONFIG_STRUCT
fi
fi # X11/MINGW OpenGL
if [ "$BUILD_ON_MAC" = "yes" ]; then
- if [ "$CFG_PHONON" != "no" ]; then
- # Always enable Phonon (unless it was explicitly disabled)
- CFG_PHONON=yes
- fi
-
if [ "$CFG_COREWLAN" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/mac/corewlan "CoreWlan" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest mac/corewlan "CoreWlan"; then
CFG_COREWLAN=yes
else
CFG_COREWLAN=no
# auto-detect OpenGL support (es2 = OpenGL ES 2.x)
if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengldesktop "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/opengldesktop "OpenGL"; then
CFG_OPENGL=desktop
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ elif compileTest unix/opengles2 "OpenGL ES 2.x"; then
CFG_OPENGL=es2
else
if [ "$CFG_OPENGL" = "yes" ]; then
QMAKE_LIBDIR_OPENGL_ES2=`$PKG_CONFIG --libs-only-L glesv2 2>/dev/null | sed -e 's,^-L,,g' -e 's, -L, ,g'`
QMAKE_LIBS_OPENGL_ES2=`$PKG_CONFIG --libs glesv2 2>/dev/null`
QMAKE_CFLAGS_OPENGL_ES2=`$PKG_CONFIG --cflags glesv2 2>/dev/null`
- QMakeVar set QMAKE_INCDIR_OPENGL_ES2 "$QMAKE_INCDIR_OPENGL_ES2"
- QMakeVar set QMAKE_LIBDIR_OPENGL_ES2 "$QMAKE_LIBDIR_OPENGL_ES2"
- QMakeVar set QMAKE_LIBS_OPENGL_ES2 "$QMAKE_LIBS_OPENGL_ES2"
+ QMakeVar set QMAKE_INCDIR_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_INCDIR_OPENGL_ES2"`"
+ QMakeVar set QMAKE_LIBDIR_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_LIBDIR_OPENGL_ES2"`"
+ QMakeVar set QMAKE_LIBS_OPENGL_ES2 "`shellArgumentListToQMakeList "$QMAKE_LIBS_OPENGL_ES2"`"
fi
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_LIBS_OPENGL_ES2 $QMAKE_CFLAGS_OPENGL_ES2
+ compileTest unix/opengles2 "OpenGL ES 2.x" $QMAKE_LIBS_OPENGL_ES2 $QMAKE_CFLAGS_OPENGL_ES2
if [ $? != "0" ]; then
echo "The OpenGL ES 2.0 functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
fi
elif [ "$CFG_OPENGL" = "desktop" ]; then
# Desktop OpenGL support
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengldesktop "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS
+ compileTest unix/opengldesktop "OpenGL"
if [ $? != "0" ]; then
echo "The OpenGL functionality test failed!"
echo " You might need to modify the include and library search paths by editing"
QT_CFLAGS_FONTCONFIG=
QT_LIBS_FONTCONFIG="-lfreetype -lfontconfig"
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/fontconfig "FontConfig" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_FONTCONFIG $QT_LIBS_FONTCONFIG; then
+ if compileTest unix/fontconfig "FontConfig" $QT_CFLAGS_FONTCONFIG $QT_LIBS_FONTCONFIG; then
QT_CONFIG="$QT_CONFIG fontconfig"
QMakeVar set QMAKE_CFLAGS_FONTCONFIG "$QT_CFLAGS_FONTCONFIG"
QMakeVar set QMAKE_LIBS_FONTCONFIG "$QT_LIBS_FONTCONFIG"
+ CFG_FONTCONFIG=yes
CFG_LIBFREETYPE=system
+ else
+ CFG_FONTCONFIG=no
fi
fi
ORIG_CFG_XCB="$CFG_XCB"
ORIG_CFG_EGLFS="$CFG_EGLFS"
ORIG_CFG_DIRECTFB="$CFG_DIRECTFB"
+ORIG_CFG_LINUXFB="$CFG_LINUXFB"
+ORIG_CFG_KMS="$CFG_KMS"
if [ "$CFG_LIBUDEV" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists libudev 2>/dev/null; then
QMakeVar set QMAKE_INCDIR_LIBUDEV "$QMAKE_INCDIR_LIBUDEV"
QMakeVar set QMAKE_LIBS_LIBUDEV "$QMAKE_LIBS_LIBUDEV"
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/libudev "libudev" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_INCDIR_LIBUDEV $QMAKE_LIBS_LIBUDEV; then
+ if compileTest unix/libudev "libudev" $QMAKE_INCDIR_LIBUDEV $QMAKE_LIBS_LIBUDEV; then
CFG_LIBUDEV=yes
QT_CONFIG="$QT_CONFIG libudev"
elif [ "$CFG_LIBUDEV" = "yes" ]; then
exit 1
else
CFG_LIBUDEV=no
- QMakeVar add DEFINES QT_NO_LIBUDEV
fi
fi
+if [ "$CFG_LIBUDEV" = "no" ]; then
+ QMakeVar add DEFINES QT_NO_LIBUDEV
+fi
if [ "$CFG_EVDEV" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/evdev "evdev" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/evdev "evdev"; then
CFG_EVDEV=yes
QT_CONFIG="$QT_CONFIG evdev"
elif [ "$CFG_EVDEV" = "yes" ]; then
exit 1
else
CFG_EVDEV=no
- QMakeVar add DEFINES QT_NO_EVDEV
fi
fi
+if [ "$CFG_EVDEV" = "no" ]; then
+ QMakeVar add DEFINES QT_NO_EVDEV
+fi
# Check we actually have X11 :-)
-if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xlib "XLib" $L_FLAGS $I_FLAGS $l_FLAGS; then
+if compileTest x11/xlib "XLib"; then
QT_CONFIG="$QT_CONFIG xlib"
fi
# auto-detect Xrender support
if [ "$CFG_XRENDER" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xrender "Xrender" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest x11/xrender "Xrender"; then
CFG_XRENDER=yes
QT_CONFIG="$QT_CONFIG xrender"
else
if [ "$CFG_XCB" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists "xcb >= 1.5" 2>/dev/null; then
- QMAKE_CFLAGS_XCB="`$PKG_CONFIG --cflags xcb 2>/dev/null`"
- QMAKE_LIBS_XCB="`$PKG_CONFIG --libs xcb 2>/dev/null`"
+ QMAKE_CFLAGS_XCB="`$PKG_CONFIG --cflags xcb xcb-image xcb-keysyms xcb-icccm xcb-sync xcb-xfixes xcb-randr 2>/dev/null`"
+ QMAKE_LIBS_XCB="`$PKG_CONFIG --libs xcb xcb-image xcb-keysyms xcb-icccm xcb-sync xcb-xfixes xcb-randr 2>/dev/null`"
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb "xcb" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
+ if compileTest qpa/xcb "xcb" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
CFG_XCB=yes
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb-render "xcb-render" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
+ if compileTest qpa/xcb-render "xcb-render" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
QT_CONFIG="$QT_CONFIG xcb-render"
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb-poll-for-queued-event "xcb-poll-for-queued-event" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
+ if compileTest qpa/xcb-poll-for-queued-event "xcb-poll-for-queued-event" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
CFG_XCB_LIMITED=no
QT_CONFIG="$QT_CONFIG xcb-poll-for-queued-event"
fi
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/xcb-xlib "xcb-xlib" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
+ if compileTest qpa/xcb-xlib "xcb-xlib" $QMAKE_CFLAGS_XCB $QMAKE_LIBS_XCB; then
QT_CONFIG="$QT_CONFIG xcb-xlib"
fi
- if [ "$XPLATFORM_MAEMO" = "yes" ]; then
- # auto-detect XInput2/Xinput support
- if [ "$CFG_XINPUT2" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/xinput2 "XInput2" $L_FLAGS $I_FLAGS $l_FLAGS; then
- CFG_XINPUT2=yes
- CFG_XINPUT=no
+ # auto-detect XInput2 support. Needed by xcb too.
+ if [ "$CFG_XINPUT2" != "no" ]; then
+ if compileTest x11/xinput2 "XInput2"; then
+ CFG_XINPUT2=yes
+ CFG_XINPUT=no
+ else
+ if [ "$CFG_XINPUT2" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
+ echo "XInput2 support cannot be enabled due to functionality tests!"
+ echo " Turn on verbose messaging (-v) to $0 to see the final report."
+ echo " If you believe this message is in error you may use the continue"
+ echo " switch (-continue) to $0 to continue."
+ exit 101
else
- if [ "$CFG_XINPUT2" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
- echo "XInput2 support cannot be enabled due to functionality tests!"
- echo " Turn on verbose messaging (-v) to $0 to see the final report."
- echo " If you believe this message is in error you may use the continue"
- echo " switch (-continue) to $0 to continue."
- exit 101
- else
- CFG_XINPUT2=no
- fi
+ CFG_XINPUT2=no
fi
fi
fi
exit 1
fi
CFG_XCB=no
- QMakeVar add DEFINES QT_NO_XCB
fi
fi
+if [ "$CFG_XCB" = "no" ]; then
+ QMakeVar add DEFINES QT_NO_XCB
+fi
if [ "$CFG_DIRECTFB" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists directfb 2>/dev/null; then
QMAKE_CFLAGS_DIRECTFB=`$PKG_CONFIG --cflags directfb 2>/dev/null`
QMAKE_LIBS_DIRECTFB=`$PKG_CONFIG --libs directfb 2>/dev/null`
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/directfb" "DirectFB" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_DIRECTFB $QMAKE_LIBS_DIRECTFB; then
+ if compileTest qpa/directfb "DirectFB" $QMAKE_CFLAGS_DIRECTFB $QMAKE_LIBS_DIRECTFB; then
CFG_DIRECTFB=yes
elif [ "$CFG_DIRECTFB" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo " DirectFB support cannot be enabled due to functionality tests!"
fi
fi
+if [ "$CFG_LINUXFB" != "no" ]; then
+ if compileTest qpa/linuxfb "LinuxFB"; then
+ CFG_LINUXFB=yes
+ elif [ "$CFG_LINUXFB" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
+ echo " Linux Framebuffer support cannot be enabled due to functionality tests!"
+ echo " Turn on verbose messaging (-v) to $0 to see the final report."
+ echo " If you believe this message is in error you may use the continue"
+ echo " switch (-continue) to $0 to continue."
+ exit 101
+ else
+ CFG_LINUXFB=no
+ fi
+fi
+
+if [ "$CFG_KMS" != "no" ]; then
+ if compileTest qpa/kms "KMS"; then
+ CFG_KMS=yes
+ elif [ "$CFG_KMS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
+ echo " KMS support cannot be enabled due to functionality tests!"
+ echo " Turn on verbose messaging (-v) to $0 to see the final report."
+ echo " If you believe this message is in error you may use the continue"
+ echo " switch (-continue) to $0 to continue."
+ exit 101
+ else
+ CFG_KMS=no
+ fi
+fi
+
# Detect libxkbcommon
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists xkbcommon 2>/dev/null; then
QMAKE_CFLAGS_XKBCOMMON="`$PKG_CONFIG --cflags xkbcommon 2>/dev/null`"
fi
# EGL Support
-if [ "$CFG_EGL" != "no" ] && [ "$CFG_OPENGL" != "desktop" ]; then
+if [ "$CFG_EGL" != "no" ]; then
if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists egl 2>/dev/null; then
QMAKE_INCDIR_EGL=`$PKG_CONFIG --cflags-only-I egl 2>/dev/null | sed -e 's,^-I,,g' -e 's, -I, ,g'`
QMAKE_LIBS_EGL=`$PKG_CONFIG --libs egl 2>/dev/null`
QMakeVar set QMAKE_INCDIR_EGL "$QMAKE_INCDIR_EGL"
QMakeVar set QMAKE_LIBS_EGL "$QMAKE_LIBS_EGL"
fi # detect EGL support
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/qpa/egl" "EGL" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_EGL $QMAKE_LIBS_EGL; then
+ if compileTest qpa/egl "EGL" $QMAKE_CFLAGS_EGL $QMAKE_LIBS_EGL; then
CFG_EGL=yes
elif [ "$CFG_EGL" = "yes" ]; then
echo " The EGL functionality test failed; EGL is required by some QPA plugins to manage contexts & surfaces."
fi
if [ "$CFG_EGLFS" != "no" ]; then
- if [ "$CFG_OPENGL" = "es2" ]; then
+ if [ "$CFG_OPENGL" = "es2" ] && [ "$CFG_EVDEV" = "yes" ]; then
CFG_EGLFS="$CFG_EGL"
else
CFG_EGLFS="no"
fi
fi
+if [ "$CFG_KMS" = "yes" ]; then
+ if [ "$CFG_OPENGL" = "es2" ] && [ "$CFG_EGL" = "yes" ]; then
+ CFG_KMS="yes"
+ else
+ CFG_KMS="no"
+ fi
+fi
+
+# Detect accessibility support
+if [ "$CFG_ACCESSIBILITY" != "no" ]; then
+ if [ "$CFG_XCB" = "no" ]; then
+ CFG_ACCESSIBILITY=yes
+ else
+ # linux/xcb accessibility needs dbus and atspi-2
+ if [ "$CFG_DBUS" != "no" ] && [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists "atspi-2" 2>/dev/null; then
+ CFG_ACCESSIBILITY=yes
+ else
+ if [ "$CFG_ACCESSIBILITY" = "auto" ]; then
+ CFG_ACCESSIBILITY=no
+ else
+ echo "Accessibility support needs pkg-config and libatspi2."
+ exit 101
+ fi
+ fi
+ fi
+fi
+
# Determine the default QPA platform
if [ -z "$QT_QPA_DEFAULT_PLATFORM" ]; then
# check the mkspec
QT_QPA_DEFAULT_PLATFORM=`getXQMakeConf QT_QPA_DEFAULT_PLATFORM`
if [ -z "$QT_QPA_DEFAULT_PLATFORM" ]; then
- if [ "$BUILD_ON_MAC" = "yes" ]; then
+ if [ "$XPLATFORM_MINGW" = "yes" ]; then
+ QT_QPA_DEFAULT_PLATFORM="windows"
+ elif [ "$BUILD_ON_MAC" = "yes" ]; then
QT_QPA_DEFAULT_PLATFORM="cocoa"
elif [ "$UNAME_SYSTEM" = "QNX" ]; then
QT_QPA_DEFAULT_PLATFORM="qnx"
QMakeVar set QMAKE_CFLAGS_DIRECTFB "$QMAKE_CFLAGS_DIRECTFB"
QMakeVar set QMAKE_LIBS_DIRECTFB "$QMAKE_LIBS_DIRECTFB"
fi
+if [ "$CFG_LINUXFB" = "yes" ]; then
+ QT_CONFIG="$QT_CONFIG linuxfb"
+fi
+if [ "$CFG_KMS" = "yes" ]; then
+ QT_CONFIG="$QT_CONFIG kms"
+fi
if [ "$BUILD_ON_MAC" = "yes" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/mac/coreservices "CoreServices" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest mac/coreservices "CoreServices"; then
QT_CONFIG="$QT_CONFIG coreservices"
else
QMakeVar add DEFINES QT_NO_CORESERVICES
fi
if [ "$BUILD_ON_MAC" = "no" ] && [ "$XPLATFORM_MINGW" = "no" ] && [ "$XPLATFORM_QNX" = "no" ]; then
- if [ "$CFG_XCB" = "no" ] && [ "$CFG_EGLFS" = "no" ] && [ "$CFG_DIRECTFB" = "no" ]; then
+ if [ "$CFG_XCB" = "no" ] && [ "$CFG_EGLFS" = "no" ] && [ "$CFG_DIRECTFB" = "no" ] && [ "$CFG_LINUXFB" = "no" ] && [ "$CFG_KMS" = "no" ]; then
if [ "$QPA_PLATFORM_GUARD" = "yes" ] &&
- ( [ "$ORIG_CFG_XCB" = "auto" ] || [ "$ORIG_CFG_EGLFS" = "auto" ] || [ "$ORIG_CFG_DIRECTFB" = "auto" ] ); then
+ ( [ "$ORIG_CFG_XCB" = "auto" ] || [ "$ORIG_CFG_EGLFS" = "auto" ] || [ "$ORIG_CFG_DIRECTFB" = "auto" ] || [ "$ORIG_CFG_LINUXFB" = "auto" ] || [ "$ORIG_CFG_KMS" = "auto" ] ); then
echo "No QPA platform plugin enabled!"
echo " If you really want to build without a QPA platform plugin you must pass"
echo " -no-qpa-platform-guard to configure. Doing this will"
fi
fi
-[ "$XPLATFORM_MINGW" = "yes" ] && [ "$CFG_PHONON" != "no" ] && CFG_PHONON="yes"
-
# freetype support
[ "$XPLATFORM_MINGW" = "yes" ] && [ "$CFG_LIBFREETYPE" = "auto" ] && CFG_LIBFREETYPE=no
if [ "$CFG_LIBFREETYPE" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/freetype "FreeType" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/freetype "FreeType"; then
CFG_LIBFREETYPE=system
else
CFG_LIBFREETYPE=yes
fi
fi
-if ! "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/stl "STL" $L_FLAGS $I_FLAGS $l_FLAGS &&
+if ! compileTest unix/stl "STL" &&
[ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
echo "STL functionality check failed! Cannot build Qt with this STL library."
echo " Turn on verbose messaging (-v) to $0 to see the final report."
# detect POSIX clock_gettime()
if [ "$CFG_CLOCK_GETTIME" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/clock-gettime "POSIX clock_gettime()" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/clock-gettime "POSIX clock_gettime()"; then
CFG_CLOCK_GETTIME=yes
else
CFG_CLOCK_GETTIME=no
# detect POSIX monotonic clocks
if [ "$CFG_CLOCK_GETTIME" = "yes" ] && [ "$CFG_CLOCK_MONOTONIC" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/clock-monotonic "POSIX Monotonic Clock" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/clock-monotonic "POSIX Monotonic Clock"; then
CFG_CLOCK_MONOTONIC=yes
else
CFG_CLOCK_MONOTONIC=no
# detect mremap
if [ "$CFG_MREMAP" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/mremap "mremap" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/mremap "mremap"; then
CFG_MREMAP=yes
else
CFG_MREMAP=no
# find if the platform provides getaddrinfo (ipv6 dns lookups)
if [ "$CFG_GETADDRINFO" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/getaddrinfo "getaddrinfo" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/getaddrinfo "getaddrinfo"; then
CFG_GETADDRINFO=yes
else
if [ "$CFG_GETADDRINFO" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# find if the platform provides inotify
if [ "$CFG_INOTIFY" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/inotify "inotify" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/inotify "inotify"; then
CFG_INOTIFY=yes
else
if [ "$CFG_INOTIFY" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# find if the platform provides if_nametoindex (ipv6 interface name support)
if [ "$CFG_IPV6IFNAME" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/ipv6ifname "IPv6 interface name" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/ipv6ifname "IPv6 interface name"; then
CFG_IPV6IFNAME=yes
else
if [ "$CFG_IPV6IFNAME" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# find if the platform provides getifaddrs (network interface enumeration)
if [ "$CFG_GETIFADDRS" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/getifaddrs "getifaddrs" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/getifaddrs "getifaddrs"; then
CFG_GETIFADDRS=yes
else
if [ "$CFG_GETIFADDRS" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# detect OpenSSL
if [ "$CFG_OPENSSL" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/openssl "OpenSSL" $L_FLAGS $I_FLAGS $l_FLAGS $MAC_CONFIG_TEST_COMMANDLINE; then
+ if compileTest unix/openssl "OpenSSL"; then
if [ "$CFG_OPENSSL" = "auto" ]; then
CFG_OPENSSL=yes
fi
# detect PCRE
if [ "$CFG_PCRE" != "qt" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/pcre "PCRE" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/pcre "PCRE"; then
CFG_PCRE=system
else
if [ "$CFG_PCRE" = "system" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
# detect OpenVG support
if [ "$CFG_OPENVG" != "no" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
+ if compileTest unix/openvg "OpenVG"; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG openvg_on_opengl" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
+ elif compileTest unix/openvg "OpenVG" -config openvg_on_opengl; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
CFG_OPENVG_ON_OPENGL=yes
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG lower_case_includes" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG (lc includes)" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
+ elif compileTest unix/openvg "OpenVG (lc includes)" -config lower_case_includes; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
CFG_OPENVG_LC_INCLUDES=yes
- elif "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG openvg_on_opengl lower_case_includes" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/openvg" "OpenVG (lc includes)" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
+ elif compileTest unix/openvg "OpenVG (lc includes)" -config "openvg_on_opengl lower_case_includes"; then
if [ "$CFG_OPENVG" = "auto" ]; then
CFG_OPENVG=yes
fi
CFG_OPENVG=no
fi
fi
- if [ "$CFG_OPENVG" = "yes" ] && "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" "config.tests/unix/shivavg" "ShivaVG" $L_FLAGS $I_FLAGS $l_FLAGS $CONFIG_ARG; then
+ if [ "$CFG_OPENVG" = "yes" ] && compileTest unix/shivavg "ShivaVG"; then
CFG_OPENVG_SHIVA=yes
fi
fi
if [ "$CFG_ALSA" = "auto" ]; then
- if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/alsa "alsa" $L_FLAGS $I_FLAGS $l_FLAGS; then
+ if compileTest unix/alsa "alsa"; then
CFG_ALSA=yes
else
CFG_ALSA=no
if [ "$CFG_JAVASCRIPTCORE_JIT" = "yes" ] || [ "$CFG_JAVASCRIPTCORE_JIT" = "auto" ]; then
if [ "$CFG_ARCH" = "arm" ]; then
- "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/javascriptcore-jit "javascriptcore-jit" $L_FLAGS $I_FLAGS $l_FLAGS
+ compileTest unix/javascriptcore-jit "javascriptcore-jit"
if [ $? != "0" ]; then
CFG_JAVASCRIPTCORE_JIT=no
fi
# ask for all that hasn't been auto-detected or specified in the arguments
#-------------------------------------------------------------------------------
-# ### Vestige
-if [ "$CFG_PHONON_BACKEND" = "yes" ]; then
- QT_CONFIG="$QT_CONFIG phonon-backend"
-fi
+[ "$CFG_CXX11" = "yes" ] && QT_CONFIG="$QT_CONFIG c++11"
# disable accessibility
if [ "$CFG_ACCESSIBILITY" = "no" ]; then
QT_CONFIG="$QT_CONFIG opengles2"
fi
-# safe execution environment
-if [ "$CFG_SXE" != "no" ]; then
- QT_CONFIG="$QT_CONFIG sxe"
-fi
-
# build up the variables for output
if [ "$CFG_DEBUG" = "yes" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}debug"
- QMAKE_CONFIG="$QMAKE_CONFIG debug"
elif [ "$CFG_DEBUG" = "no" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}release"
- QMAKE_CONFIG="$QMAKE_CONFIG release"
fi
if [ "$CFG_SHARED" = "yes" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}-shared"
- QMAKE_CONFIG="$QMAKE_CONFIG shared dll"
+ QT_CONFIG="$QT_CONFIG shared"
elif [ "$CFG_SHARED" = "no" ]; then
QMAKE_OUTDIR="${QMAKE_OUTDIR}-static"
- QMAKE_CONFIG="$QMAKE_CONFIG static"
+ QT_CONFIG="$QT_CONFIG static"
fi
#FIXME: qpa is implicit this should all be removed
fi
[ "$CFG_REDUCE_EXPORTS" = "yes" ] && QT_CONFIG="$QT_CONFIG reduce_exports"
[ "$CFG_REDUCE_RELOCATIONS" = "yes" ] && QT_CONFIG="$QT_CONFIG reduce_relocations"
+[ "$CFG_STRIP" = "no" ] && QMAKE_CONFIG="$QMAKE_CONFIG nostrip"
[ "$CFG_PRECOMPILE" = "yes" ] && QMAKE_CONFIG="$QMAKE_CONFIG precompile_header"
if [ "$CFG_SEPARATE_DEBUG_INFO" = "yes" ]; then
QMakeVar add QMAKE_CFLAGS -g
[ "$CFG_XCB" = "yes" ] && QT_CONFIG="$QT_CONFIG xcb"
[ "$CFG_XINPUT2" = "yes" ] && QT_CONFIG="$QT_CONFIG xinput2"
-[ '!' -z "$D_FLAGS" ] && QMakeVar add DEFINES "$D_FLAGS"
-[ '!' -z "$L_FLAGS" ] && QMakeVar add QMAKE_LIBDIR_FLAGS "$L_FLAGS"
-[ '!' -z "$l_FLAGS" ] && QMakeVar add LIBS "$l_FLAGS"
+[ '!' -z "$DEFINES" ] && QMakeVar add DEFINES "$DEFINES"
+[ '!' -z "$L_FLAGS" ] && QMakeVar add LIBS "$L_FLAGS"
if [ "$PLATFORM_MAC" = "yes" ] && [ "$QT_CROSS_COMPILE" = "no" ]; then
if [ "$CFG_RPATH" = "yes" ]; then
QMAKE_CONFIG="$QMAKE_CONFIG absolute_library_soname"
- # set the default rpath to the library installation directory
- RPATH_FLAGS="\"$QT_INSTALL_LIBS\" $RPATH_FLAGS"
fi
elif [ -z "`getXQMakeConf 'QMAKE_(LFLAGS_)?RPATH'`" ]; then
if [ -n "$RPATH_FLAGS" ]; then
CFG_RPATH=no
fi
else
- if [ "$CFG_RPATH" = "yes" ]; then
- # set the default rpath to the library installation directory
- RPATH_FLAGS="\"$QT_INSTALL_LIBS\" $RPATH_FLAGS"
- fi
if [ -n "$RPATH_FLAGS" ]; then
# add the user defined rpaths
QMakeVar add QMAKE_RPATHDIR "$RPATH_FLAGS"
fi
fi
+if [ "$CFG_RPATH" = "yes" ]; then
+ QT_CONFIG="$QT_CONFIG rpath"
+fi
if [ '!' -z "$I_FLAGS" ]; then
# add the user define include paths
QCONFIG_FLAGS="$QCONFIG_FLAGS QT_QML_NO_DEBUGGER"
fi
-case "$COMPILER" in
-g++*)
+case "$QMAKE_CONF_COMPILER" in
+*g++*)
# GNU C++
COMPILER_VERSION=`${QMAKE_CONF_COMPILER} -dumpversion 2>/dev/null`
echo '/* Compile time features */' >>"$outpath/src/corelib/global/qconfig.h.new"
[ '!' -z "$LicenseKeyExt" ] && echo "#define QT_PRODUCT_LICENSEKEY \"$LicenseKeyExt\"" >>"$outpath/src/corelib/global/qconfig.h.new"
+if [ "$CFG_SHARED" = "no" ]; then
+ cat >>"$outpath/src/corelib/global/qconfig.h.new" <<EOF
+/* Qt was configured for a static build */
+#if !defined(QT_SHARED) && !defined(QT_STATIC)
+# define QT_STATIC
+#endif
+
+EOF
+fi
+
if [ "$CFG_LARGEFILE" = "yes" ] && [ "$XPLATFORM_MINGW" != "yes" ]; then
echo "#define QT_LARGEFILE_SUPPORT 64" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
echo "#define QT_REDUCE_RELOCATIONS" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
+# Add compiler sub-architecture support
+echo "" >>"$outpath/src/corelib/global/qconfig.h.new"
+echo "// Compiler sub-arch support" >>"$outpath/src/corelib/global/qconfig.h.new"
+for SUBARCH in SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 AVX AVX2 \
+ IWMMXT NEON \
+ MIPS_DSP MIPS_DSPR2; do
+ eval "VAL=\$CFG_$SUBARCH"
+ case "$VAL" in
+ yes)
+ echo "#define QT_COMPILER_SUPPORTS_$SUBARCH" \
+ >>"$outpath/src/corelib/global/qconfig.h.new"
+ ;;
+ esac
+done
echo "" >>"$outpath/src/corelib/global/qconfig.h.new"
fi
# Add QPA to config.h
-QCONFIG_FLAGS="$QCONFIG_FLAGS Q_WS_QPA QT_NO_QWS_QPF QT_NO_QWS_QPF2"
+QCONFIG_FLAGS="$QCONFIG_FLAGS"
if [ "${CFG_USE_FLOATMATH}" = "yes" ]; then
QCONFIG_FLAGS="${QCONFIG_FLAGS} QT_USE_MATH_H_FLOATS"
esac
done
-
QMakeVar set sql-drivers "$SQL_DRIVERS"
QMakeVar set sql-plugins "$SQL_PLUGINS"
[ "$CFG_PNG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_PNG"
[ "$CFG_JPEG" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_IMAGEFORMAT_JPEG"
[ "$CFG_ZLIB" != "yes" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_ZLIB"
-[ "$CFG_SXE" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SXE"
[ "$CFG_DBUS" = "no" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_DBUS"
# X11/Unix/Mac only configs
CONFIG += $QTCONFIG_CONFIG
QT_ARCH = $CFG_ARCH
QT_HOST_ARCH = $CFG_HOST_ARCH
+QT_CPU_FEATURES = $CFG_CPUFEATURES
+QT_HOST_CPU_FEATURES = $CFG_HOST_CPUFEATURES
+QMAKE_DEFAULT_LIBDIRS = `echo "$DEFAULT_LIBDIRS" | sed 's,^,",;s,$,",' | tr '\n' ' '`
+QMAKE_DEFAULT_INCDIRS = `echo "$DEFAULT_INCDIRS" | sed 's,^,",;s,$,",' | tr '\n' ' '`
QT_EDITION = $Edition
QT_CONFIG += $QT_CONFIG
echo "# pkgconfig" >> "$QTCONFIG.tmp"
echo "PKG_CONFIG_SYSROOT_DIR = $PKG_CONFIG_SYSROOT_DIR" >> "$QTCONFIG.tmp"
echo "PKG_CONFIG_LIBDIR = $PKG_CONFIG_LIBDIR" >> "$QTCONFIG.tmp"
- echo >> $"$QTCONFIG.tmp"
+ echo >> "$QTCONFIG.tmp"
fi
-if [ -n "$CFG_SYSROOT" ]; then
+if [ -n "$CFG_SYSROOT" ] && [ "$CFG_GCC_SYSROOT" = "yes" ]; then
echo "# sysroot" >>"$QTCONFIG.tmp"
- echo `basename "$XQMAKESPEC"` \{ >>"$QTCONFIG.tmp"
+ echo "!host_build {" >>"$QTCONFIG.tmp"
echo " QMAKE_CFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
echo " QMAKE_CXXFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
echo " QMAKE_LFLAGS += --sysroot=\$\$[QT_SYSROOT]" >>"$QTCONFIG.tmp"
if [ -n "$QMAKE_INCDIR_OPENGL_ES2" ]; then
echo "#Qt opengl include path" >> "$QTCONFIG.tmp"
- echo "QMAKE_INCDIR_OPENGL_ES2 = \"$QMAKE_INCDIR_OPENGL_ES2\"" >> "$QTCONFIG.tmp"
+ echo "QMAKE_INCDIR_OPENGL_ES2 = `shellArgumentListToQMakeList "$QMAKE_INCDIR_OPENGL_ES2"`" >> "$QTCONFIG.tmp"
fi
# replace qconfig.pri if it differs from the newly created temp file
#-------------------------------------------------------------------------------
QTMODULE="$outpath/mkspecs/qmodule.pri"
-echo "CONFIG += create_prl link_prl" >> "$QTMODULE.tmp"
+echo "CONFIG += $QMAKE_CONFIG create_prl link_prl" >> "$QTMODULE.tmp"
+echo "QT_BUILD_PARTS += $CFG_BUILD_PARTS" >> "$QTMODULE.tmp"
-# Ensure we can link to uninistalled libraries
-if [ "$BUILD_ON_MAC" != "yes" ] && [ "$XPLATFORM_MINGW" != "yes" ] && linkerSupportsFlag -rpath-link "$outpath/lib"; then
- echo "QMAKE_LFLAGS = -Wl,-rpath-link,\$\$QT_BUILD_TREE/lib \$\$QMAKE_LFLAGS" >> "$QTMODULE.tmp"
-fi
if [ -n "$QT_CFLAGS_PSQL" ]; then
echo "QT_CFLAGS_PSQL = $QT_CFLAGS_PSQL" >> "$QTMODULE.tmp"
fi
#paths
QT_SOURCE_TREE = \$\$quote($relpath)
QT_BUILD_TREE = \$\$quote($outpath)
-QT_BUILD_PARTS = $CFG_BUILD_PARTS
-
-#local paths that cannot be queried from the QT_INSTALL_* properties while building QTDIR
-QMAKE_INCDIR_QT = \$\$QT_BUILD_TREE/include
-QMAKE_LIBDIR_QT = \$\$QT_BUILD_TREE/lib
include(\$\$PWD/mkspecs/qmodule.pri)
-CONFIG += $QMAKE_CONFIG dylib depend_includepath fix_output_dirs no_private_qt_headers_warning QTDIR_build
+CONFIG += dylib fix_output_dirs no_private_qt_headers_warning QTDIR_build
EOF
-#dump the qmake spec
-if [ -d "$outpath/mkspecs/$XPLATFORM" ]; then
- echo "QMAKESPEC = \$\$QT_BUILD_TREE/mkspecs/$XPLATFORM" >> "$CACHEFILE.tmp"
-else
- echo "QMAKESPEC = $XPLATFORM" >> "$CACHEFILE.tmp"
-fi
-
# replace .qmake.cache if it differs from the newly created temp file
if cmp -s "$CACHEFILE.tmp" "$CACHEFILE"; then
rm -f "$CACHEFILE.tmp"
echo "Building for: $XPLATFORM"
fi
-echo "Architecture: $CFG_ARCH"
-echo "Host architecture: $CFG_HOST_ARCH"
+# the missing space before $CFG_FEATURES is intentional
+echo "Architecture: $CFG_ARCH, features:$CFG_CPUFEATURES"
+echo "Host architecture: $CFG_HOST_ARCH, features:$CFG_HOST_CPUFEATURES"
if [ -n "$PLATFORM_NOTES" ]; then
echo "Platform notes:"
else
echo "Debug .................. $CFG_DEBUG"
fi
+if [ "$CFG_RELEASE" = "yes" ] || [ "$CFG_DEBUG_RELEASE" = "yes" ]; then
+ echo "Force debug info ....... $CFG_FORCEDEBUGINFO"
+fi
+echo "C++11 support .......... $CFG_CXX11"
if [ -n "$PKG_CONFIG" ]; then
echo "pkg-config ............. yes"
else
echo "Xfixes support ......... $CFG_XFIXES"
echo "Xrandr support ......... $CFG_XRANDR"
echo "Xi support ............. $CFG_XINPUT"
+echo "Xi2 support ............ $CFG_XINPUT2"
echo "MIT-SHM support ........ $CFG_MITSHM"
echo "FontConfig support ..... $CFG_FONTCONFIG"
echo "XKB Support ............ $CFG_XKB"
fi
echo "EGLFS support .......... $CFG_EGLFS"
echo "DirectFB support ....... $CFG_DIRECTFB"
+echo "LinuxFB support ........ $CFG_LINUXFB"
+echo "KMS support ............ $CFG_KMS"
echo
# complain about not being able to use dynamic plugins if we are using a static build
# build makefiles based on the configuration
#-------------------------------------------------------------------------------
-echo "Finding project files. Please wait..."
-if [ "$CFG_NOPROCESS" != "yes" ]; then
- "$outpath/bin/qmake" -prl -r "${relpath}/qtbase.pro"
- if [ -f "${relpath}/qtbase.pro" ]; then
- mkfile="${outpath}/Makefile"
- [ -f "$mkfile" ] && chmod +w "$mkfile"
- QTDIR="$outpath" "$outpath/bin/qmake" -spec "$XQMAKESPEC" "${relpath}/qtbase.pro" -o "$mkfile"
- fi
-fi
-
-# .projects -> projects to process
-# .projects.1 -> qt and moc
-# .projects.2 -> subdirs and libs
-# .projects.3 -> the rest
-rm -f .projects .projects.1 .projects.2 .projects.3
-
-QMAKE_PROJECTS=`find "$relpath/." -name '*.pro' -print | sed 's-/\./-/-'`
-if [ -z "$AWK" ]; then
- for p in `echo $QMAKE_PROJECTS`; do
- echo "$p" >> .projects
- done
-else
- cat >projects.awk <<EOF
-BEGIN {
- files = 0
- target_file = ""
- input_file = ""
-
- first = "./.projects.1.tmp"
- second = "./.projects.2.tmp"
- third = "./.projects.3.tmp"
-}
-
-FNR == 1 {
- if ( input_file ) {
- if ( ! target_file )
- target_file = third
- print input_file >target_file
- }
-
- matched_target = 0
- template_lib = 0
- input_file = FILENAME
- target_file = ""
-}
-
-/^(TARGET.*=)/ {
- if ( \$3 == "moc" || \$3 ~ /^Qt/ ) {
- target_file = first
- matched_target = 1
- } else if ( \$3 == "lrelease" || \$3 == "qm_phony_target" ) {
- target_file = second
- matched_target = 1
- }
-}
-
-matched_target == 0 && /^(TEMPLATE.*=)/ {
- if ( \$3 == "subdirs" )
- target_file = second
- else if ( \$3 == "lib" )
- template_lib = 1
- else
- target_file = third
-}
+if [ "$CFG_PROCESS" != "no" ]; then
-matched_target == 0 && template_lib == 1 && /^(CONFIG.*=)/ {
- if ( \$0 ~ /plugin/ )
- target_file = third
+ if [ "$CFG_PROCESS" = "full" ]; then
+ echo "Creating makefiles. Please wait..."
+ "$outpath/bin/qmake" -r "$relpath"
+ echo "Done"
else
- target_file = second
-}
-
-END {
- if ( input_file ) {
- if ( ! target_file )
- target_file = third
- print input_file >>target_file
- }
-}
-
-EOF
-
- rm -f .projects.all
- for p in `echo $QMAKE_PROJECTS`; do
- echo "$p" >> .projects.all
- done
-
- # if you get errors about the length of the command line to awk, change the -l arg
- # to split below
- split -l 100 .projects.all .projects.all.
- for p in .projects.all.*; do
- "$AWK" -f projects.awk `cat $p`
- [ -f .projects.1.tmp ] && cat .projects.1.tmp >> .projects.1
- [ -f .projects.2.tmp ] && cat .projects.2.tmp >> .projects.2
- [ -f .projects.3.tmp ] && cat .projects.3.tmp >> .projects.3
- rm -f .projects.1.tmp .projects.2.tmp .projects.3.tmp $p
- done
- rm -f .projects.all* projects.awk
-
- [ -f .projects.1 ] && cat .projects.1 >>.projects
- [ -f .projects.2 ] && cat .projects.2 >>.projects
- rm -f .projects.1 .projects.2
- if [ -f .projects.3 ] && [ "$OPT_FAST" = "no" ]; then
- cat .projects.3 >>.projects
- rm -f .projects.3
- fi
-fi
-# don't sort Qt and MOC in with the other project files
-# also work around a segfaulting uniq(1)
-if [ -f .sorted.projects.2 ]; then
- sort .sorted.projects.2 > .sorted.projects.2.new
- mv -f .sorted.projects.2.new .sorted.projects.2
- cat .sorted.projects.2 >> .sorted.projects.1
-fi
-[ -f .sorted.projects.1 ] && sort .sorted.projects.1 >> .sorted.projects
-rm -f .sorted.projects.2 .sorted.projects.1
-
-NORM_PROJECTS=0
-FAST_PROJECTS=0
-if [ -f .projects ]; then
- uniq .projects >.tmp
- mv -f .tmp .projects
- NORM_PROJECTS=`cat .projects | wc -l | sed -e "s, ,,g"`
-fi
-if [ -f .projects.3 ]; then
- uniq .projects.3 >.tmp
- mv -f .tmp .projects.3
- FAST_PROJECTS=`cat .projects.3 | wc -l | sed -e "s, ,,g"`
-fi
-echo " `expr $NORM_PROJECTS + $FAST_PROJECTS` projects found."
-echo
-
-PART_ROOTS=
-for part in $CFG_BUILD_PARTS; do
- case "$part" in
- tools) PART_ROOTS="$PART_ROOTS tools" ;;
- libs) PART_ROOTS="$PART_ROOTS src" ;;
- translations) PART_ROOTS="$PART_ROOTS translations" ;;
- examples) PART_ROOTS="$PART_ROOTS examples" ;;
- *) ;;
- esac
-done
-
-if [ "$CFG_DEV" = "yes" ]; then
- PART_ROOTS="$PART_ROOTS tests"
-fi
-
-echo "Creating makefiles. Please wait..."
-for file in .projects .projects.3; do
- [ '!' -f "$file" ] && continue
- for a in `cat $file`; do
- IN_ROOT=no
- for r in $PART_ROOTS; do
- if echo "$a" | grep "^$r" >/dev/null 2>&1 || echo "$a" | grep "^$relpath/$r" >/dev/null 2>&1; then
- IN_ROOT=yes
- break
- fi
- done
- [ "$IN_ROOT" = "no" ] && continue
+ "$outpath/bin/qmake" "$relpath"
+ fi
- case $a in
- *winmain/winmain.pro)
- if [ "$CFG_NOPROCESS" = "yes" ] || [ "$XPLATFORM_MINGW" != "yes" ]; then
- continue
- fi
- SPEC=$XQMAKESPEC ;;
- */qmake/qmake.pro) continue ;;
- *tools/bootstrap*|*tools/moc*|*tools/rcc*|*tools/uic*|*tools/qdoc*|*tools/qdbusxml2cpp*|*tools/qdbuscpp2xml*) SPEC=$QMAKESPEC ;;
- *) if [ "$CFG_NOPROCESS" = "yes" ]; then
- continue
- else
- SPEC=$XQMAKESPEC
- fi;;
- esac
- dir=`dirname "$a" | sed -e "s;$sepath;.;g"`
- test -d "$dir" || mkdir -p "$dir"
- OUTDIR="$outpath/$dir"
- if [ -f "${OUTDIR}/Makefile" ] && [ "$OPT_FAST" = "yes" ]; then
- # fast configure - the makefile exists, skip it
- # since the makefile exists, it was generated by qmake, which means we
- # can skip it, since qmake has a rule to regenerate the makefile if the .pro
- # file changes...
- [ "$OPT_VERBOSE" = "yes" ] && echo " skipping $a"
- continue;
- fi
- QMAKE_SPEC_ARGS="-spec $SPEC"
- echo $ECHO_N " for $a$ECHO_C"
-
- QMAKE="$outpath/bin/qmake"
- QMAKE_ARGS="$QMAKE_SWITCHES $QMAKE_SPEC_ARGS"
- if [ "$file" = ".projects.3" ]; then
- echo " (fast)"
-
- cat >"${OUTDIR}/Makefile" <<EOF
-# ${OUTDIR}/Makefile: generated by configure
+ if [ "$OPT_FAST" = "yes" ]; then
+ PART_ROOTS=
+ for part in $CFG_BUILD_PARTS; do
+ case "$part" in
+ examples|tests) PART_ROOTS="$PART_ROOTS $part" ;;
+ esac
+ done
+ if [ "x$PART_ROOTS" != "x" ]; then
+ echo
+ echo "Creating stub makefiles. Please wait..."
+ QMAKE="$outpath/bin/qmake"
+ [ "$CFG_DEBUG_RELEASE" = "no" ] && first_tgt="first_target: first" || first_tgt=
+ (cd "$relpath" && find $PART_ROOTS -name '*.pro') | grep -v /testdata/ | while read p; do
+ d=${p%/*}
+ test -f "$outpath/$d/Makefile" && continue
+ echo " for $relpath/$p"
+
+ mkdir -p "$outpath/$d" || exit
+ cat > "$outpath/$d/Makefile" <<EOF || exit
+# $outpath/$d/Makefile: generated by configure
#
# WARNING: This makefile will be replaced with a real makefile.
# All changes made to this file will be lost.
-EOF
- [ "$CFG_DEBUG_RELEASE" = "no" ] && echo "first_target: first" >>${OUTDIR}/Makefile
- cat >>"${OUTDIR}/Makefile" <<EOF
QMAKE = "$QMAKE"
+
+$first_tgt
all clean install qmake first Makefile: FORCE
- \$(QMAKE) $QMAKE_ARGS -o "$OUTDIR" "$a"
- cd "$OUTDIR"
+ \$(QMAKE) $QMAKE_SWITCHES "$relpath/$p"
\$(MAKE) \$@
-
FORCE:
-
EOF
- else
- if [ "$OPT_VERBOSE" = "yes" ]; then
- echo " (`basename $SPEC`)"
- echo "$QMAKE" $QMAKE_ARGS -o "$OUTDIR" "$a"
- else
- echo
- fi
-
- [ -f "${OUTDIR}/Makefile" ] && chmod +w "${OUTDIR}/Makefile"
- QTDIR="$outpath" "$QMAKE" $QMAKE_ARGS -o "$OUTDIR" "$a"
- fi
- done
-done
-rm -f .projects .projects.3
+ done || exit
+ echo "Done"
+ fi
+ fi
+fi
#-------------------------------------------------------------------------------
# check for platforms that we don't yet know about
projects / profile / ivi / qtbase.git / blobdiff