Convert CONFIG_SPL_STACK to Kconfig

[platform/kernel/u-boot.git] / configs / verdin-imx8mp_defconfig

diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
index e95dd21..2107047 100644 (file)
--- a/configs/verdin-imx8mp_defconfig
+++ b/configs/verdin-imx8mp_defconfig
@@ -1,13 +1,10 @@
 CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
 CONFIG_SYS_TEXT_BASE=0x40200000
-CONFIG_SYS_MALLOC_F_LEN=0x10000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x40000000
-CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFDE00
 CONFIG_SYS_I2C_MXC_I2C1=y
@@ -24,9 +21,11 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
+CONFIG_SYS_LOAD_ADDR=0x43500000
+CONFIG_SYS_MEMTEST_START=0x40000000
+CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_LOAD_ADDR=0x43500000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_VERBOSE=y
@@ -35,22 +34,28 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile imx8mp-verdin-${variant}-${fdt_board}.dtb"
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx8mp-verdin-${variant}-${fdt_board}.dtb"
 CONFIG_LOG=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_BSS_MAX_SIZE=0x400
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SEPARATE_BSS=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x960000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="Verdin iMX8MP # "
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2081
 # CONFIG_BOOTM_NETBSD is not set
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_EXPORTENV is not set
@@ -123,6 +128,7 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_POWER_I2C=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y