CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
CONFIG_SPL_SYS_ICACHE_OFF=y
CONFIG_SPL_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_AT91=y
-CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
+CONFIG_SPL_LDSCRIPT="arch/arm/cpu/u-boot-spl.lds"
CONFIG_SYS_TEXT_BASE=0x21000000
+CONFIG_SYS_MALLOC_LEN=0x460000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_TAURUS=y
CONFIG_BOARD_TAURUS=y
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_OFFSET=0x100000
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
-CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=18432000
+CONFIG_ENV_OFFSET_REDUND=0x180000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067"
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_CRC32_SUPPORT=y
+CONFIG_SPL_CRC32=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_DRIVERS=y
+CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_BASE=y
+CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
-CONFIG_SYS_XTRACE="n"
+# CONFIG_SYS_XTRACE is not set
# CONFIG_CMD_BDI is not set
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
CONFIG_CMD_NAND=y
# CONFIG_CMD_PINMUX is not set
CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_MTDPARTS=y
-# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_OFFSET_REDUND=0x180000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPL_DM=y
-CONFIG_BLK=y
CONFIG_CLK=y
CONFIG_CLK_AT91=y
CONFIG_DFU_NAND=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
+CONFIG_AT91_GPIO=y
# CONFIG_MMC is not set
+CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
+CONFIG_SYS_NAND_PAGE_COUNT=0x40
+CONFIG_SYS_NAND_PAGE_SIZE=0x800
+CONFIG_SYS_NAND_OOBSIZE=0x40
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
+CONFIG_MACB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
-CONFIG_DEBUG_UART_ATMEL=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
-CONFIG_DM_USB=y
# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
CONFIG_USB_GADGET_VENDOR_NUM=0x0908
CONFIG_WDT=y
CONFIG_WDT_AT91=y
CONFIG_HEXDUMP=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y