Convert CONFIG_SYS_BOOTM_LEN to Kconfig

[platform/kernel/u-boot.git] / configs / stm32mp15_dhcor_basic_defconfig

diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index 4e70566..01fbb05 100644 (file)
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -14,6 +14,8 @@ CONFIG_SPL_SPI=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_SYS_LOAD_ADDR=0xc2000000
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000
@@ -23,7 +25,15 @@ CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_CONSOLE_MUX=y
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x3db00
 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x30000000
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_ENV_SUPPORT=y
@@ -37,7 +47,10 @@ CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_SPL_USB_GADGET=y
 CONFIG_SPL_DFU=y
+CONFIG_SPL_TARGET="u-boot.itb"
 CONFIG_SYS_PROMPT="STM32MP> "
+CONFIG_SYS_PBSIZE=1050
+CONFIG_SYS_BOOTM_LEN=0x2000000
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_EXPORTENV is not set
 CONFIG_CMD_EEPROM=y
@@ -58,6 +71,7 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
@@ -70,6 +84,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=nor0:256k(fsbl1),256k(fsbl2),1408k(uboot),64k(
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_ISO_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_OF_LIVE=y
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
@@ -108,6 +123,7 @@ CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y
 CONFIG_DWC_ETH_QOS=y
+CONFIG_KS8851_MLL=y
 CONFIG_PHY=y
 CONFIG_SPL_PHY=y
 CONFIG_PHY_STM32_USBPHYC=y