binman: Add a prefix before CBFS hex offsets

[platform/kernel/u-boot.git] / configs / stm32mp15_basic_defconfig

diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 4aa184f..27b8525 100644 (file)
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -4,6 +4,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x3000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_TARGET_STM32MP1=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
@@ -11,6 +13,7 @@ CONFIG_SPL_TEXT_BASE=0x2FFC2500
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SYS_PROMPT="STM32MP> "
 # CONFIG_CMD_BOOTD is not set
@@ -43,6 +46,7 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
 CONFIG_ENV_IS_NOWHERE=y
 CONFIG_ENV_IS_IN_EXT4=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
@@ -52,6 +56,7 @@ CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
 CONFIG_ENV_EXT4_FILE="/uboot.env"
 CONFIG_ENV_UBI_PART="UBI"
 CONFIG_ENV_UBI_VOLUME="uboot_config"
+CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
 CONFIG_STM32_ADC=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
@@ -65,6 +70,8 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_STM32_IPCC=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_STM32_SDMMC2=y
@@ -94,6 +101,9 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_REGULATOR_STM32_VREFBUF=y
 CONFIG_DM_REGULATOR_STPMIC1=y
+CONFIG_REMOTEPROC_STM32_COPRO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
 CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_STM32_SERIAL=y
 CONFIG_SPI=y
@@ -110,5 +120,4 @@ CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_WDT=y
-CONFIG_WDT_STM32MP=y
+CONFIG_FDT_FIXUP_PARTITIONS=y