Convert CONFIG_SPL_STACK to Kconfig

[platform/kernel/u-boot.git] / configs / socfpga_secu1_defconfig

diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig
index cc15644..72cf0d1 100644 (file)
--- a/configs/socfpga_secu1_defconfig
+++ b/configs/socfpga_secu1_defconfig
@@ -13,10 +13,15 @@ CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
 CONFIG_ENV_OFFSET_REDUND=0x120000
 # CONFIG_SPL_LIBDISK_SUPPORT is not set
 # CONFIG_SPL_SPI is not set
+CONFIG_SYS_LOAD_ADDR=0x02000000
 CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_LOAD_ADDR=0x02000000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
 CONFIG_FIT=y
+CONFIG_BOOT_RETRY=y
+CONFIG_BOOT_RETRY_TIME=45
+CONFIG_RESET_TO_RETRY=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 ubi.fm_autoconvert=1 uio_pdrv_genirq.of_id=\"idq,regbank\""
 CONFIG_BOOTCOMMAND="setenv bootcmd 'bridge enable; if test ${bootnum} = 'b'; then run _fpga_loadsafe; else if test ${bootcount} -eq 4; then echo 'Switching copy...'; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; run _fpga_loaduser; fi;echo 'Booting bank $bootnum' && run userload && run userboot;' && setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && saveenv && saveenv && boot;"
@@ -26,11 +31,18 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CLOCKS=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_PAD_TO=0x10000
+CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x0
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
-# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set
 CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
@@ -53,6 +65,8 @@ CONFIG_CMD_UBI=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="zImage"
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 # CONFIG_SPL_BLK is not set
@@ -92,6 +106,7 @@ CONFIG_RTC_M41T62=y
 CONFIG_SPI=y
 CONFIG_SPI_MEM=y
 CONFIG_DESIGNWARE_SPI=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 CONFIG_DESIGNWARE_WATCHDOG=y
 CONFIG_WDT=y
 # CONFIG_GZIP is not set