Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig

[platform/kernel/u-boot.git] / configs / sama5d27_som1_ek_qspiflash_defconfig

diff --git a/configs/sama5d27_som1_ek_qspiflash_defconfig b/configs/sama5d27_som1_ek_qspiflash_defconfig
index 2fcb10b..8753790 100644 (file)
--- a/configs/sama5d27_som1_ek_qspiflash_defconfig
+++ b/configs/sama5d27_som1_ek_qspiflash_defconfig
@@ -1,18 +1,21 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SAMA5D27_SOM1_EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_som1_ek"
+CONFIG_SPL_TEXT_BASE=0x200000
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
@@ -20,41 +23,37 @@ CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_DEBUG_UART=y
-CONFIG_SPL_TEXT_BASE=0x200000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
-CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_som1_ek"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_BUS=y
-CONFIG_ENV_SPI_BUS=0
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=0
-CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=50000000
-CONFIG_USE_ENV_SPI_MODE=y
-CONFIG_ENV_SPI_MODE=0x0
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
@@ -69,7 +68,6 @@ CONFIG_ATMEL_PIO4=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
 CONFIG_I2C_EEPROM=y
-CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
@@ -86,7 +84,6 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
@@ -96,17 +93,16 @@ CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_BPP16=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
 CONFIG_ATMEL_HLCD=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
-CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT_OVERLAY=y