configs: ls1021a-tsn: enable sja1105 switch driver

[platform/kernel/u-boot.git] / configs / sam9x60ek_qspiflash_defconfig

diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig
index 694c74b..292a1ab 100644 (file)
--- a/configs/sam9x60ek_qspiflash_defconfig
+++ b/configs/sam9x60ek_qspiflash_defconfig
@@ -1,17 +1,20 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x23f00000
-CONFIG_TARGET_SAM9X60EK=y
+CONFIG_SYS_MALLOC_LEN=0x81000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60EK=y
 CONFIG_NR_DRAM_BANKS=8
 CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -33,6 +36,8 @@ CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
@@ -52,6 +57,7 @@ CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
@@ -65,6 +71,7 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_PMECC_CAP=8
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y