Convert CONFIG_SYS_MALLOC_LEN to Kconfig

[platform/kernel/u-boot.git] / configs / sam9x60ek_mmc_defconfig

diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
index e97b20a..b262332 100644 (file)
--- a/configs/sam9x60ek_mmc_defconfig
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -1,16 +1,19 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x23f00000
 CONFIG_TARGET_SAM9X60EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_NR_DRAM_BANKS=8
 CONFIG_ENV_SIZE=0x4000
+CONFIG_SYS_MALLOC_LEN=0x81000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=200000000
-CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -25,10 +28,14 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_FAT=y
@@ -45,9 +52,13 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
 CONFIG_I2C_EEPROM=y
 CONFIG_MICROCHIP_FLEXCOM=y
-CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
+CONFIG_PMECC_CAP=8
 CONFIG_PHY_MICREL=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y