CONFIG_ARM=y
+CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_NEXELL=y
-CONFIG_ARCH_S5P4418=y
+CONFIG_SYS_TEXT_BASE=0x74C00000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0x2E0200
+CONFIG_DM_GPIO=y
CONFIG_TARGET_NANOPI2=y
+CONFIG_S5P4418_ONEWIRE=y
+CONFIG_ROOT_DEV=1
+CONFIG_BOOT_PART=1
+CONFIG_ROOT_PART=2
CONFIG_DEFAULT_DEVICE_TREE="s5p4418-nanopi2"
CONFIG_FIT=y
-
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=1
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
CONFIG_SYS_MEMTEST_START=0x71000000
CONFIG_SYS_MEMTEST_END=0xb0000000
-
-CONFIG_CMD_MEMTEST=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-
-# Default is CONFIG_NET=y, in this case:
-# Loading Environment from MMC... ## Warning: Unknown environment variable type 'm'
-# OK
-# CONFIG_CMD_NET=y must be set to avoid this Warning. But then:
-# Net: Net Initialization Skipped
-# No ethernet found.
-# If CONFIG_NET=n is set additionally warning at "make s5p4418_nanopi2_defconfig":
-# arch/../configs/s5p4418_nanopi2_defconfig:24:warning: override: reassigning to symbol CMD_NET
-#
-# --> CONFIG_NET=n set only
-CONFIG_NET=n
-
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_FDISK=y
-CONFIG_CMD_EXT4_IMG_WRITE=y
-CONFIG_CMD_SD_RECOVERY=y
+CONFIG_CMD_BMP=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
-
-CONFIG_PINCTRL=y
-CONFIG_DM_GPIO=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_MMC_ENV_DEV=2
+# CONFIG_NET is not set
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_NEXELL=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_PINCTRL=y
CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_AXP228=y
CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_AXP228=y
-CONFIG_DM_PWM=n
-
-CONFIG_DISPLAY=y
+CONFIG_CONS_INDEX=0
CONFIG_DM_VIDEO=y
-CONFIG_SYS_CONSOLE_BG_COL=0xff
-CONFIG_SYS_CONSOLE_FG_COL=0x00
+CONFIG_DISPLAY=y
CONFIG_VIDEO_NX=y
CONFIG_VIDEO_NX_RGB=y
CONFIG_VIDEO_NX_LVDS=y
CONFIG_VIDEO_NX_HDMI=y
-CONFIG_CMD_BMP=y
-
-## LCD backlight control
-CONFIG_S5P4418_ONEWIRE=y
-CONFIG_PWM_NX is not set
-
-CONFIG_REGEX=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_SPLASH_SOURCE=y
CONFIG_ERRNO_STR=y
-
-CONFIG_SYS_TEXT_BASE=0x74C00000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_CACHELINE_SIZE=64
-
-## System initialize options (board_init_f)
-# board_init_f->init_sequence, call board_early_init_f
-CONFIG_BOARD_LATE_INIT=y
-# board_init_f->init_sequence, call print_cpuinfo
-CONFIG_DISPLAY_CPUINFO=y
-# board_init_f->init_sequence, call show_board_info
-CONFIG_DISPLAY_BOARDINFO=y
-# board_init_f, CONFIG_SYS_ICACHE_OFF
-CONFIG_SYS_DCACHE_OFF=y
-# board_init_r, call arch_misc_init
-CONFIG_ARCH_MISC_INIT=y
-
-CONFIG_BOOTDELAY=1
-CONFIG_ZERO_BOOTDELAY_CHECK=y
-
-## U-Boot Environments
-## refer to common/env_common.c
-
-# CONFIG_ENV_IS_IN_MMC must be set here and not in s5p4418_nanopi2.h
-# otherwise CONFIG_ENV_IS_NOWHERE is set by env/Kconfig and environment
-# (bootargs) are not loaded
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_ENV_OFFSET=0x2E0200
-CONFIG_ENV_SIZE=0x4000
-CONFIG_CMD_SAVEENV=y
-
-## Etc Command definition
-# image info
-CONFIG_CMD_IMI=y
-# add command line history
-CONFIG_CMDLINE_EDITING=y
-CONFIG_CMDLINE_TAG=y
-CONFIG_INITRD_TAG=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_REVISION_TAG=y
-CONFIG_CMD_BOOTZ=y
-
-## serial console configuration
-CONFIG_CONS_INDEX=0
-CONFIG_BAUDRATE=115200
-
-## SD/MMC
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_GENERIC_MMC=y
-CONFIG_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_NEXELL_DWMMC=y
-CONFIG_CMD_MMC=y
-CONFIG_DM_MMC=y
-
-CONFIG_DOS_PARTITION=y
-CONFIG_CMD_FAT=y
-CONFIG_FS_FAT=y
-CONFIG_FAT_WRITE=y
-
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_FS_EXT4=y
-CONFIG_EXT4_WRITE=y
-
-## OF_CONTROL
-CONFIG_FIT_BEST_MATCH=y
-CONFIG_OF_LIBFDT=y
-CONFIG_OF_BOARD_SETUP=y
-
-## BOOTCOMMAND
-CONFIG_ROOT_DEV=1
-CONFIG_BOOT_PART=1
-CONFIG_ROOT_PART=2
-
-# necessary for if-cmd
-CONFIG_HUSH_PARSER=y
-
-# set to 'n' to save memory
-CONFIG_SYS_LONGHELP=y
-
-# For debugging (trace) of MMC-CMDs
-CONFIG_MMC_TRACE=n
projects / platform / kernel / u-boot.git / blobdiff