Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig

[platform/kernel/u-boot.git] / configs / pm9263_defconfig

diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig
index 0538a2f..f0767a4 100644 (file)
--- a/configs/pm9263_defconfig
+++ b/configs/pm9263_defconfig
@@ -2,15 +2,21 @@ CONFIG_ARM=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0
-CONFIG_TARGET_PM9263=y
+CONFIG_SYS_MALLOC_LEN=0x50000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ENV_SIZE=0x10000
+CONFIG_TARGET_PM9263=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 "
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run flashboot"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
@@ -20,23 +26,24 @@ CONFIG_SYS_PROMPT="u-boot-pm9263> "
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_JFFS2=y
+CONFIG_JFFS2_DEV="nand0"
+CONFIG_JFFS2_PART_SIZE=0x10000000
 CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0x10040000
 CONFIG_DM=y
 CONFIG_BLK=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
@@ -49,14 +56,14 @@ CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
 CONFIG_DM_SERIAL=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
 CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_BPP8=y
-CONFIG_VIDEO_BPP16=y
+# CONFIG_VIDEO_BPP32 is not set
 CONFIG_LCD=y
+CONFIG_JFFS2_NAND=y