Convert CONFIG_FSL_DEVICE_DISABLE to Kconfig

[platform/kernel/u-boot.git] / configs / pico-imx8mq_defconfig

diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig
index 1b0d12c..1b49eb2 100644 (file)
--- a/configs/pico-imx8mq_defconfig
+++ b/configs/pico-imx8mq_defconfig
@@ -1,6 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
-CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_TEXT_BASE=0x40200000
 CONFIG_SYS_MALLOC_LEN=0x600000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -21,6 +21,7 @@ CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_REMAKE_ELF=y
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
@@ -30,14 +31,26 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x1f000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x180000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x187ff0
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
 # CONFIG_BOOTM_NETBSD is not set
+CONFIG_SYS_BOOTM_LEN=0x8000000
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
@@ -69,7 +82,6 @@ CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ATHEROS=y
-CONFIG_DM_ETH=y
 CONFIG_PHY_GIGE=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
@@ -83,5 +95,6 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_POWER_I2C=y
 CONFIG_DM_RESET=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y