Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

[platform/kernel/u-boot.git] / configs / phycore-imx8mp_defconfig

diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index fdc136c..42172f3 100644 (file)
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -2,7 +2,6 @@ CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
 CONFIG_SYS_TEXT_BASE=0x40200000
 CONFIG_SYS_MALLOC_LEN=0x2000000
-CONFIG_SYS_MALLOC_F_LEN=0x10000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
@@ -24,17 +23,29 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x98fc00
+CONFIG_SPL_BSS_MAX_SIZE=0x400
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SEPARATE_BSS=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x960000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
@@ -75,13 +86,12 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_ES_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_TI_DP83867=y
 CONFIG_DM_ETH=y