Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig

[platform/kernel/u-boot.git] / configs / phycore-imx8mm_defconfig

diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 86772f4..82a52e2 100644 (file)
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -1,47 +1,54 @@
 CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
 CONFIG_SYS_TEXT_BASE=0x40200000
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x10000
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x3C0000
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="phycore-imx8mm"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_PHYCORE_IMX8MM=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3E0000
-CONFIG_DEFAULT_DEVICE_TREE="phycore-imx8mm"
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SEPARATE_BSS=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_POWER_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_SPI_FLASH_MTD=y
+CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_SIZE=4096
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -66,22 +73,30 @@ CONFIG_SPL_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MXC=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
-CONFIG_SYS_EEPROM_SIZE=4096
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
-CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_ES_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_BUS=3
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=80000000
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_TI_DP83867=y
 CONFIG_DM_ETH=y
@@ -95,6 +110,9 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y