Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig

[platform/kernel/u-boot.git] / configs / pcm058_defconfig

diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig
index 87cac5c..132942b 100644 (file)
--- a/configs/pcm058_defconfig
+++ b/configs/pcm058_defconfig
@@ -1,70 +1,97 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SYS_MALLOC_LEN=0x800000
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_PCM058=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_MX6Q=y
+CONFIG_MX6_OCRAM_256KB=y
+CONFIG_TARGET_PCM058=y
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-phytec-mira-rdk-nand"
+CONFIG_SPL_TEXT_BASE=0x00908000
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x110000
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI=y
 CONFIG_CMD_HDMIDETECT=y
-CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="run mmcboot;run nandboot"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x18a
 CONFIG_SPL_DMA=y
 CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
+CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
-CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x31400
+CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_SYS_MAXARGS=32
+CONFIG_SYS_PBSIZE=532
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
+# CONFIG_CMD_PINMUX is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
+CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(rootfs)"
 CONFIG_CMD_UBI=y
 # CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_MXS=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
+CONFIG_NAND_MXS_DT=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_FEC_MXC=y
 CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+# CONFIG_PINCONF_RECURSIVE is not set
+CONFIG_SPL_PINCTRL=y
+CONFIG_SPL_PINCONF=y
+# CONFIG_SPL_PINCONF_RECURSIVE is not set
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_SERIAL=y
+CONFIG_MXC_UART=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
-CONFIG_DM_THERMAL=y
-CONFIG_OF_LIBFDT=y
+# CONFIG_SPL_WDT is not set