Convert CONFIG_SYS_MAXARGS to Kconfig

[platform/kernel/u-boot.git] / configs / omap35_logic_somlv_defconfig

diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
index 9f3a88f..8b7af0b 100644 (file)
--- a/configs/omap35_logic_somlv_defconfig
+++ b/configs/omap35_logic_somlv_defconfig
@@ -3,24 +3,25 @@ CONFIG_ARM=y
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SYS_TEXT_BASE=0x80100000
+CONFIG_SYS_MALLOC_F_LEN=0x3000
 CONFIG_TI_COMMON_CMD_OPTIONS=y
 # CONFIG_SPL_GPIO is not set
-CONFIG_SYS_MALLOC_F_LEN=0x3000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-35xx-devkit"
 CONFIG_SPL_TEXT_BASE=0x40200000
 CONFIG_TARGET_OMAP3_LOGIC=y
 # CONFIG_SPL_OMAP3_ID_NAND is not set
 CONFIG_SPL=y
+CONFIG_LTO=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_ANDROID_BOOT_IMAGE=y
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_MONITOR_BASE=0x10000000
+CONFIG_BOOTCOMMAND="run autoboot"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv preboot;saveenv;"
 CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SEPARATE_BSS=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_I2C is not set
@@ -30,8 +31,11 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_FALCON_BOOT_MMCSD=y
+CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 # CONFIG_SPL_POWER is not set
 CONFIG_SYS_PROMPT="OMAP Logic # "
+CONFIG_SYS_MAXARGS=64
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x240000
@@ -62,6 +66,11 @@ CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
+CONFIG_SYS_NAND_PAGE_COUNT=0x40
+CONFIG_SYS_NAND_PAGE_SIZE=0x800
+CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
@@ -82,8 +91,6 @@ CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
 # CONFIG_SPL_DM_USB is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_HAS_OMAP_EHCI_PHY1_RESET_GPIO=y
-CONFIG_OMAP_EHCI_PHY1_RESET_GPIO=4
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_OMAP2PLUS=y
 CONFIG_TWL4030_USB=y