Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig

[platform/kernel/u-boot.git] / configs / omap35_logic_defconfig

diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index c7b67f0..e5fcba8 100644 (file)
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -3,28 +3,43 @@ CONFIG_ARM=y
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SYS_TEXT_BASE=0x80100000
+CONFIG_SYS_MALLOC_F_LEN=0x3000
 CONFIG_TI_COMMON_CMD_OPTIONS=y
-# CONFIG_SPL_GPIO_SUPPORT is not set
-CONFIG_SYS_MALLOC_F_LEN=0x4000
+# CONFIG_SPL_GPIO is not set
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-35xx-devkit"
+CONFIG_SPL_TEXT_BASE=0x40200000
 CONFIG_TARGET_OMAP3_LOGIC=y
 # CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x40200000
+CONFIG_LTO=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
 CONFIG_ANDROID_BOOT_IMAGE=y
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="run autoboot"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv preboot;saveenv;"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb"
-CONFIG_VERSION_VARIABLE=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_MAX_SIZE=0xec00
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
+# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 # CONFIG_SPL_FS_EXT4 is not set
+# CONFIG_SPL_I2C is not set
 CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_NAND_DRIVERS=y
+CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_FALCON_BOOT_MMCSD=y
+CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 CONFIG_SYS_PROMPT="OMAP Logic # "
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=1054
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_NAND_OFS=0x240000
@@ -40,23 +55,27 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-35xx-devkit"
+CONFIG_ENV_OVERWRITE=y
 # CONFIG_ENV_IS_IN_FAT is not set
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_OF_TRANSLATE=y
-# CONFIG_SPL_DM_GPIO is not set
 CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
+CONFIG_SYS_NAND_PAGE_COUNT=0x40
+CONFIG_SYS_NAND_PAGE_SIZE=0x800
+CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_DM_ETH=y
 CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x08000000
 CONFIG_SMC911X_32_BIT=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_SINGLE=y
@@ -70,7 +89,6 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 # CONFIG_SPL_DM_USB is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_OMAP is not set