mtd: nand: raw: atmel: Add error handling when rb-gpios missing

[platform/kernel/u-boot.git] / configs / nanopi-r2s-rk3328_defconfig

diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index 0665368..f7ed71e 100644 (file)
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -2,22 +2,27 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
+CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3328=y
 CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_SPL_STACK=0x400000
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 CONFIG_DEBUG_UART_BASE=0xFF130000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_DEBUG_UART=y
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -26,13 +31,19 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x2000000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
@@ -44,8 +55,8 @@ CONFIG_TPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_TPL_OF_PLATDATA=y
 CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_TPL_DM=y
 CONFIG_REGMAP=y
@@ -60,12 +71,12 @@ CONFIG_FASTBOOT_BUF_ADDR=0x800800
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_DM_PMIC=y
@@ -80,15 +91,14 @@ CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y
 CONFIG_TPL_RAM=y
-CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
 CONFIG_SYSINFO=y
 CONFIG_SYSRESET=y
 # CONFIG_TPL_SYSRESET is not set
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_OHCI_HCD=y
@@ -96,6 +106,7 @@ CONFIG_USB_OHCI_GENERIC=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_DWC3=y
 # CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_SPL_TINY_MEMSET=y