Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig

[platform/kernel/u-boot.git] / configs / lx2160ardb_tfa_defconfig

diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 8798f3e..3040382 100644 (file)
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -18,10 +18,12 @@ CONFIG_SPL_VID=y
 CONFIG_VID_FLS_ENV="lx2160ardb_vdd_mv"
 CONFIG_VOL_MONITOR_LTC3882_READ=y
 CONFIG_VOL_MONITOR_LTC3882_SET=y
+CONFIG_FSL_QIXIS=y
 CONFIG_EMC2305=y
 CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_ENV_ADDR=0x20500000
 CONFIG_AHCI=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_REMAKE_ELF=y
@@ -34,6 +36,9 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
@@ -52,13 +57,15 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0x20500000
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="DPMAC1@xgmii"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DIMM_SLOTS_PER_CTLR=2
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_MPC8XXX_GPIO=y
@@ -83,7 +90,7 @@ CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_FSL_LS_MDIO=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_PCIE_LAYERSCAPE_GEN4=y
@@ -100,6 +107,7 @@ CONFIG_OPTEE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_WDT=y
 CONFIG_WDT_SBSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y