Convert CONFIG_PHYLIB et al to Kconfig

[platform/kernel/u-boot.git] / configs / ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig

diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 96d4479..8dea978 100644 (file)
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS1088ARDB=y
 CONFIG_SYS_TEXT_BASE=0x80400000
+CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -14,8 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
 CONFIG_SPL_TEXT_BASE=0x1800a000
 CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_FSL_LS_PPA=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
@@ -32,12 +33,11 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
-CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DM=y
@@ -58,10 +58,18 @@ CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SCSI_AHCI=y
 # CONFIG_SPL_BLK is not set
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_SYS_I2C_LEGACY=y
+CONFIG_SYS_MXC_I2C1_SPEED=40000000
+CONFIG_SYS_MXC_I2C2_SPEED=40000000
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_SPANSION=y
@@ -70,6 +78,7 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_VITESSE=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
+CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_FSL_LS_MDIO=y