configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / configs / ls1088aqds_tfa_defconfig

diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig
index 99fb3c0..ae00387 100644 (file)
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@@ -3,33 +3,42 @@ CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS1088AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_LEN=0x0220000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_SPL_VID=y
+CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv"
+CONFIG_VOL_MONITOR_LTC3882_READ=y
+CONFIG_VOL_MONITOR_LTC3882_SET=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -47,26 +56,36 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_ENV_ADDR=0x20500000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
-CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHYLIB_10G=y
@@ -76,14 +95,13 @@ CONFIG_PHY_VITESSE=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_DM_MDIO_MUX=y
+CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_MDIO_MUX_I2CREG=y
 CONFIG_FSL_LS_MDIO=y
 CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_PCF2127=y
@@ -94,7 +112,6 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y