Convert CONFIG_SYS_MAX_FLASH_SECT to Kconfig

[platform/kernel/u-boot.git] / configs / ls1088aqds_sdcard_ifc_defconfig

diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig
index 8674814..bc626e3 100644 (file)
--- a/configs/ls1088aqds_sdcard_ifc_defconfig
+++ b/configs/ls1088aqds_sdcard_ifc_defconfig
@@ -2,37 +2,61 @@ CONFIG_ARM=y
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_LS1088AQDS=y
 CONFIG_SYS_TEXT_BASE=0x80400000
+CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x300000
-CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
 CONFIG_SPL_TEXT_BASE=0x1800a000
-CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_AHCI=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_SPL_VID=y
+CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv"
+CONFIG_VOL_MONITOR_LTC3882_READ=y
+CONFIG_VOL_MONITOR_LTC3882_SET=y
+CONFIG_FSL_QIXIS=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0
 # CONFIG_SYS_MALLOC_F is not set
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_SD_BOOT=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_RESET_PHY_R=y
+CONFIG_SPL_MAX_SIZE=0x16000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80100000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x18009ff0
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
@@ -47,27 +71,34 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="DPMAC1@xgmii"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_EARLY_INIT=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
+CONFIG_ESDHC_DETECT_QUIRK=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
+CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
@@ -76,9 +107,10 @@ CONFIG_PHYLIB_10G=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_TERANETICS=y
 CONFIG_PHY_VITESSE=y
+CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y