Convert CONFIG_PCIE1 et al to Kconfig

[platform/kernel/u-boot.git] / configs / ls1046ardb_qspi_spl_defconfig

diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index a88baaf..57cebf5 100644 (file)
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -1,6 +1,8 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1046ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_LEN=0x102000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -11,7 +13,6 @@ CONFIG_SYS_I2C_MXC_I2C1=y
 CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
-CONFIG_SYS_MALLOC_LEN=0x102000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
 CONFIG_SPL_TEXT_BASE=0x10000000
@@ -22,7 +23,15 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_AHCI=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
@@ -34,15 +43,29 @@ CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x1f000
+CONFIG_SPL_PAD_TO=0x20000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x8f000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x10020000
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x90000000
 CONFIG_SYS_OS_BASE=0x40980000
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SPL_TARGET="spl/u-boot-spl.pbl"
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_SPL=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
@@ -54,7 +77,6 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
@@ -62,17 +84,23 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_ENV_IS_NOWHERE=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC3"
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 # CONFIG_SPI_FLASH_BAR is not set
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
@@ -83,7 +111,8 @@ CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
-CONFIG_NVME=y
+CONFIG_SYS_FMAN_FW_ADDR=0x40900000
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_PCIE_LAYERSCAPE_EP=y