Convert CONFIG_SYS_MAX_FLASH_SECT to Kconfig

[platform/kernel/u-boot.git] / configs / ls1046aqds_nand_defconfig

diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index 09e0218..084d264 100644 (file)
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_LEN=0x102000
@@ -14,6 +15,15 @@ CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart"
 CONFIG_SPL_TEXT_BASE=0x10000000
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL=y
+CONFIG_AHCI=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
 CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_VID=y
 CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv"
@@ -21,14 +31,11 @@ CONFIG_VOL_MONITOR_INA220=y
 CONFIG_VOL_MONITOR_IR36021_SET=y
 CONFIG_FSL_QIXIS=y
 # CONFIG_QIXIS_I2C_ACCESS is not set
-CONFIG_FSL_LS_PPA=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL=y
-CONFIG_AHCI=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0
 CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
@@ -44,8 +51,16 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nand_bootcmd; env exists secureboot && esbc_halt;;"
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x17000
+CONFIG_SPL_PAD_TO=0x40000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x8f000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x1001f000
+CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
 CONFIG_SPL_ENV_SUPPORT=y
@@ -53,6 +68,8 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
@@ -89,7 +106,9 @@ CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_NAND_FSL_IFC=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y