Convert CONFIG_PCIE1 et al to Kconfig

[platform/kernel/u-boot.git] / configs / ls1046afrwy_tfa_SECURE_BOOT_defconfig

diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
index 4da4963..1be7002 100644 (file)
--- a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
@@ -1,21 +1,34 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1046AFRWY=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_LEN=0x102000
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_ENV_OFFSET=0x500000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
 CONFIG_QSPI_AHB_INIT=y
-CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
+CONFIG_NXP_ESBC=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_MISC_INIT_R=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -23,19 +36,26 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
-CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
-CONFIG_ENV_ADDR=0x40500000
+CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC3"
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_MMC=y
+# CONFIG_DDR_SPD is not set
+CONFIG_MPC8XXX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_FSL_SEC_MON_BE=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x52
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -43,26 +63,20 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_VITESSE=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_SYS_FMAN_FW_ADDR=0x900000
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
-CONFIG_DM_I2C=y
-CONFIG_DM_GPIO=y
-CONFIG_SECURE_BOOT=y
 CONFIG_RSA=y
-CONFIG_ENV_IS_NOWHERE=y
-CONFIG_CMD_SETEXPR=y