Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig

[platform/kernel/u-boot.git] / configs / ls1028aqds_tfa_lpuart_defconfig

diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index bc5f8f4..5dff575 100644 (file)
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x6000
@@ -9,10 +10,10 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds-lpuart"
 CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds-lpuart"
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
@@ -23,7 +24,9 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M"
 CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
@@ -46,12 +49,12 @@ CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+# CONFIG_DDR_SPD is not set
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
-CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
@@ -71,8 +74,6 @@ CONFIG_FSL_ENETC=y
 CONFIG_MDIO_MUX_I2CREG=y
 CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
@@ -87,7 +88,6 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_NXP_FSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y