Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig

[platform/kernel/u-boot.git] / configs / ls1021atwr_sdcard_ifc_defconfig

diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index f44d72c..3159226 100644 (file)
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -1,4 +1,6 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
 CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -8,6 +10,9 @@ CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x300000
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
 CONFIG_SPL_TEXT_BASE=0x10000000
@@ -16,11 +21,15 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SD_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT"
+CONFIG_RAMBOOT_PBL=y
+CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg"
+CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg"
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -28,15 +37,17 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SPL_WATCHDOG=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPIO=y
@@ -53,6 +64,9 @@ CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x53
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y