Prepare v2023.10

[platform/kernel/u-boot.git] / configs / librem5_defconfig

diff --git a/configs/librem5_defconfig b/configs/librem5_defconfig
index e8d57af..166ef5f 100644 (file)
--- a/configs/librem5_defconfig
+++ b/configs/librem5_defconfig
@@ -1,6 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
-CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_TEXT_BASE=0x40200000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
@@ -14,19 +14,21 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mq-librem5-r4"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_LIBREM5=y
+CONFIG_DM_RESET=y
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x187ff0
 CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
-CONFIG_DISTRO_DEFAULTS=y
 CONFIG_REMAKE_ELF=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=0
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_SYS_DEVICE_NULLDEV is not set
@@ -39,7 +41,6 @@ CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x187ff0
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
@@ -48,8 +49,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
-CONFIG_SPL_USB_GADGET=y
-CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_PROMPT="u-boot=> "
 CONFIG_SYS_MAXARGS=64
@@ -119,7 +118,6 @@ CONFIG_FSL_USDHC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DM_ETH=y
 CONFIG_PHY=y
 CONFIG_PHY_IMX8MQ_USB=y
 CONFIG_PINCTRL=y
@@ -131,7 +129,6 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_POWER_I2C=y
-CONFIG_DM_RESET=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
@@ -145,8 +142,10 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_GADGET=y
+CONFIG_SPL_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Purism"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_SDP_LOADADDR=0x40400000
 CONFIG_USB_FUNCTION_ACM=y
+CONFIG_SPL_USB_SDP_SUPPORT=y