Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

[platform/kernel/u-boot.git] / configs / kontron_sl28_defconfig

diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index 29a45ec..05627bb 100644 (file)
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -1,26 +1,33 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_SL28=y
+CONFIG_SYS_MALLOC_LEN=0x202000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x3e0000
 CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-kontron-sl28"
 CONFIG_SPL_TEXT_BASE=0x18010000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f0000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI=y
 # CONFIG_PSCI_RESET is not set
+CONFIG_ARMV8_PSCI=y
+CONFIG_ARMV8_PSCI_RELOCATE=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800eff0
+CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
@@ -30,39 +37,55 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_PCI_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80100000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
 CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_SEPARATE_BSS=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x18009ff0
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_DFU=y
 CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_WDT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_RNG=y
-CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_LIST=""
+CONFIG_OF_LIST="fsl-ls1028a-kontron-sl28 fsl-ls1028a-kontron-sl28-var1 fsl-ls1028a-kontron-sl28-var2 fsl-ls1028a-kontron-sl28-var3 fsl-ls1028a-kontron-sl28-var4"
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETCONSOLE=y
+CONFIG_SYS_RX_ETH_BUFFER=8
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SATA=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_FSL_DDR3=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_SF=y
+CONFIG_SL28CPLD_GPIO=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
+CONFIG_SL28CPLD=y
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y
@@ -76,8 +99,7 @@ CONFIG_DM_DSA=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MSCC_FELIX_SWITCH=y
-CONFIG_NVME=y
-CONFIG_PCI=y
+CONFIG_NVME_PCI=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_RTC_RV8803=y
@@ -88,7 +110,20 @@ CONFIG_FSL_DSPI=y
 CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 # CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
+# CONFIG_USB_XHCI_FSL is not set
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_LAYERSCAPE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+# CONFIG_WATCHDOG is not set
+# CONFIG_WATCHDOG_AUTOSTART is not set
+CONFIG_WDT=y
+CONFIG_WDT_SL28CPLD=y
+CONFIG_WDT_SP805=y
 CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y