doc: board: ti: Move documentation from README to .rst

[platform/kernel/u-boot.git] / configs / j721e_evm_a72_defconfig

diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
index 5efaff2..214fa8b 100644 (file)
--- a/configs/j721e_evm_a72_defconfig
+++ b/configs/j721e_evm_a72_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_K3=y
+CONFIG_TI_SECURE_DEVICE=y
 CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_GPIO=y
@@ -8,11 +9,15 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_J721E=y
 CONFIG_TARGET_J721E_A72_EVM=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-common-proc-board"
 CONFIG_SPL_TEXT_BASE=0x80080000
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
@@ -22,15 +27,13 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_PSCI_RESET is not set
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;"
 CONFIG_LOGLEVEL=7
 CONFIG_SPL_MAX_SIZE=0xc0000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
@@ -59,8 +62,6 @@ CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
-CONFIG_SPL_USB_GADGET=y
-CONFIG_SPL_DFU=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_SYS_MAXARGS=64
 CONFIG_CMD_ASKENV=y
@@ -75,7 +76,6 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_UFS=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus"
@@ -90,18 +90,13 @@ CONFIG_OF_LIST="k3-j721e-common-proc-board k3-j721e-sk"
 CONFIG_MULTI_DTB_FIT=y
 CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_NOWHERE=y
-CONFIG_ENV_IS_IN_FAT=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
 CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
@@ -174,7 +169,6 @@ CONFIG_RAM=y
 CONFIG_SPL_RAM=y
 CONFIG_REMOTEPROC_TI_K3_DSP=y
 CONFIG_REMOTEPROC_TI_K3_R5F=y
-CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
@@ -199,10 +193,11 @@ CONFIG_USB_CDNS3_GADGET=y
 CONFIG_USB_CDNS3_HOST=y
 CONFIG_SPL_USB_CDNS3_GADGET=y
 CONFIG_USB_GADGET=y
+CONFIG_SPL_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 CONFIG_USB_GADGET_PRODUCT_NUM=0x6163
+CONFIG_SPL_DFU=y
 CONFIG_UFS=y
 CONFIG_CADENCE_UFS=y
 CONFIG_TI_J721E_UFS=y
-CONFIG_OF_LIBFDT_OVERLAY=y