configs: Resync with savedefconfig

[platform/kernel/u-boot.git] / configs / imx8mm-icore-mx8mm-ctouch2_defconfig

diff --git a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
index c95ff3e..f94cf70 100644 (file)
--- a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
+++ b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig
@@ -1,6 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_IMX8M=y
-CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_TEXT_BASE=0x40200000
 CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -11,25 +11,24 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mm-icore-mx8mm-ctouch2"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MM_ICORE_MX8MM=y
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x920000
 CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x40480000
-CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-ctouch2.dtb"
-CONFIG_SPL_MAX_SIZE=0x25000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x910000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x920000
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
@@ -41,6 +40,7 @@ CONFIG_SYS_PROMPT="u-boot=> "
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
+CONFIG_SYS_BOOTM_LEN=0x10000000
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_CRC32 is not set
@@ -74,7 +74,6 @@ CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ATHEROS=y
-CONFIG_DM_ETH=y
 CONFIG_PHY_GIGE=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
@@ -85,9 +84,7 @@ CONFIG_DM_REGULATOR=y
 CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_CONS_INDEX=2
 CONFIG_DM_SERIAL=y
-# CONFIG_SPL_DM_SERIAL is not set
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y