Convert CONFIG_HOSTNAME et al to Kconfig

[platform/kernel/u-boot.git] / configs / imx28_xea_defconfig

diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index 418bd06..b29c62f 100644 (file)
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_SPL_SYS_THUMB_BUILD=y
 CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
+CONFIG_TEXT_BASE=0x40002000
 CONFIG_SYS_MALLOC_F_LEN=0x800
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -20,8 +20,8 @@ CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x90000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_SYS_LOAD_ADDR=0x42000000
+CONFIG_SPL_PAYLOAD="u-boot.img"
 CONFIG_FIT=y
 CONFIG_TIMESTAMP=y
 CONFIG_OF_BOARD_SETUP=y
@@ -32,9 +32,12 @@ CONFIG_BOOTCOMMAND="run ${bootpri} ; run ${bootsec}"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="run prebootcmd"
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x20000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
@@ -42,12 +45,16 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_MMC_TINY=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x44000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x400
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x40
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_SPL=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
@@ -76,8 +83,9 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="xea"
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_DEVRES=y
 CONFIG_MXS_GPIO=y
@@ -98,7 +106,6 @@ CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ADDR=1
 CONFIG_PHY_FIXED=y
-CONFIG_DM_ETH=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y