Convert CONFIG_SPL_NAND_BASE et al to Kconfig

[platform/kernel/u-boot.git] / configs / gardena-smart-gateway-at91sam_defconfig

diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig
index 4173ff3..425feb6 100644 (file)
--- a/configs/gardena-smart-gateway-at91sam_defconfig
+++ b/configs/gardena-smart-gateway-at91sam_defconfig
@@ -7,16 +7,18 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_ENV_SIZE=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0x300000
+CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9g25-gardena-smart-gateway"
 CONFIG_DEBUG_UART=y
-CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -25,9 +27,10 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(boots
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SEPARATE_BSS=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_DRIVERS=y
+CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_DM=y
@@ -48,7 +51,6 @@ CONFIG_MTDPARTS_DEFAULT="nand0:1536k(uboot),1024k(unused),512k(dtb_old),4608k(ke
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9g25-gardena-smart-gateway"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupts interrupt-parent interrupts-extended dmas dma-names"
 CONFIG_ENV_IS_IN_UBI=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
@@ -62,13 +64,11 @@ CONFIG_SPL_DM=y
 CONFIG_BLK=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
 CONFIG_DM_ETH=y
@@ -76,7 +76,6 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y