arm: dts: k3-am642-*: Mark the memory node with u-boot, dm-spl

[platform/kernel/u-boot.git] / configs / dra7xx_hs_evm_defconfig

diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 9b5294c..3c9293d 100644 (file)
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -1,8 +1,8 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_TI_SECURE_DEVICE=y
-CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
@@ -19,20 +19,17 @@ CONFIG_SPL_SPI=y
 CONFIG_ARMV7_LPAE=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT_IMAGE_POST_PROCESS=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
-CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; "
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_BOARD_EARLY_INIT_F=y
 # CONFIG_MISC_INIT_R is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_NAND_DRIVERS=y
@@ -65,6 +62,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RETRY_COUNT=10
 CONFIG_BOOTP_SEND_HOSTNAME=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
@@ -99,8 +97,9 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
 CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x140000
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=76800000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_TI_DP83867=y