configs: Resync with savedefconfig

[platform/kernel/u-boot.git] / configs / corvus_defconfig

diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 9683c66..ecf61f0 100644 (file)
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -5,7 +5,7 @@ CONFIG_SYS_THUMB_BUILD=y
 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x72000000
+CONFIG_TEXT_BASE=0x72000000
 CONFIG_SYS_MALLOC_LEN=0x460000
 CONFIG_SYS_MALLOC_F_LEN=0x800
 CONFIG_TARGET_CORVUS=y
@@ -15,15 +15,16 @@ CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70007f00
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
 CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK=0x4000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
 CONFIG_SYS_LOAD_ADDR=0x70000000
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70007f00
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -34,8 +35,11 @@ CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0x3000
 CONFIG_SPL_PAD_TO=0x20000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x3000
 CONFIG_SPL_BSS_MAX_SIZE=0x800
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y