Convert CONFIG_BOOTP_MAY_FAIL et al to Kconfig

[platform/kernel/u-boot.git] / configs / bitmain_antminer_s9_defconfig

diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig
index 95e0458..f3d5e5d 100644 (file)
--- a/configs/bitmain_antminer_s9_defconfig
+++ b/configs/bitmain_antminer_s9_defconfig
@@ -3,20 +3,26 @@ CONFIG_SYS_VENDOR="bitmain"
 CONFIG_SYS_BOARD="antminer_s9"
 CONFIG_SYS_CONFIG_NAME="bitmain_antminer_s9"
 CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_SYS_L2CACHE_OFF=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_ENV_OFFSET=0x300000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="bitmain-antminer-s9"
 CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0xEFFFFF0
+CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
 CONFIG_DEBUG_UART_CLOCK=50000000
 CONFIG_DEBUG_UART=y
+CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -33,11 +39,11 @@ CONFIG_CMD_FPGA_LOADMK=y
 CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_LOCK_UNLOCK=y
 CONFIG_CMD_PART=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_MAY_FAIL=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -48,25 +54,28 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
-CONFIG_DEFAULT_DEVICE_TREE="bitmain-antminer-s9"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_BOOTP_SERVERIP=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
-CONFIG_DM_GPIO=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ZYNQ=y
 CONFIG_NAND_ZYNQ_USE_BOOTLOADER1_TIMINGS=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 # CONFIG_WATCHDOG is not set
 CONFIG_WDT=y