configs: Resync with savedefconfig

[platform/kernel/u-boot.git] / configs / at91sam9n12ek_nandflash_defconfig

diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig
index b5964de..a964c9a 100644 (file)
--- a/configs/at91sam9n12ek_nandflash_defconfig
+++ b/configs/at91sam9n12ek_nandflash_defconfig
@@ -1,18 +1,21 @@
 CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x26f00000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TEXT_BASE=0x26f00000
 CONFIG_TARGET_AT91SAM9N12EK=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x303f00
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
-CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_DEBUG_UART=y
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
@@ -21,6 +24,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
@@ -38,21 +43,16 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
 CONFIG_NAND_ATMEL=y
-CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
+CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_KS8851_MLL=y
-CONFIG_KS8851_MLL_BASEADDR=0x30000000
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
@@ -63,4 +63,3 @@ CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_ATMEL_HLCD=y