Convert CONFIG_PCIE1 et al to Kconfig

[platform/kernel/u-boot.git] / configs / T2080QDS_defconfig

diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig
index 2ac50ee..a94fd3f 100644 (file)
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@@ -3,17 +3,43 @@ CONFIG_SYS_TEXT_BASE=0xEFF40000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
+<<<<<<< HEAD
+=======
+CONFIG_ENV_ADDR=0xEFF20000
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080QDS=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_PCIE4=y
+>>>>>>> Convert CONFIG_PCIE1 et al to Kconfig
 CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_VID=y
+CONFIG_VID_FLS_ENV="t208xqds_vdd_mv"
+CONFIG_VOL_MONITOR_IR36021_READ=y
+CONFIG_VOL_MONITOR_IR36021_SET=y
+CONFIG_FSL_QIXIS=y
+# CONFIG_QIXIS_I2C_ACCESS is not set
+CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T2080QDS=y
 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
@@ -22,7 +48,6 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_MP=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
@@ -31,9 +56,18 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),9
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC3"
 CONFIG_DM=y
+CONFIG_FSL_SATA_V2=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DIMM_SLOTS_PER_CTLR=2
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_FSL=y
@@ -52,8 +86,8 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -65,6 +99,7 @@ CONFIG_PHY_TERANETICS=y
 CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
+CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
 CONFIG_MII=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_FSL=y
@@ -74,6 +109,8 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64