Convert CONFIG_PCIE1 et al to Kconfig

[platform/kernel/u-boot.git] / configs / T1024RDB_SDCARD_defconfig

diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig
index 8a82082..06bb7b7 100644 (file)
--- a/configs/T1024RDB_SDCARD_defconfig
+++ b/configs/T1024RDB_SDCARD_defconfig
@@ -1,10 +1,8 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
+CONFIG_SYS_TEXT_BASE=0x30000000
 CONFIG_SYS_MALLOC_LEN=0xa00000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MEMTEST_START=0x00200000
-CONFIG_SYS_MEMTEST_END=0x00400000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="t1024rdb"
@@ -15,12 +13,18 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T1024RDB=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/t102xrdb/t1024_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/t102xrdb/t1024_sd_rcw.cfg"
@@ -29,16 +33,28 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x28000
+CONFIG_SPL_PAD_TO=0x40000
 CONFIG_SPL_MMC_BOOT=y
 CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_GD_ADDR=0xfffc8000
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
@@ -60,6 +76,10 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),9
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC4"
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_FSL_DDR3=y
@@ -102,6 +122,7 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64