Convert CONFIG_HOSTNAME et al to Kconfig

[platform/kernel/u-boot.git] / configs / P1010RDB-PA_NOR_defconfig

diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig
index 9a4a1b5..fe24faa 100644 (file)
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ b/configs/P1010RDB-PA_NOR_defconfig
@@ -1,16 +1,25 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
+CONFIG_TEXT_BASE=0xEFF40000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
+CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_MPC85xx=y
+CONFIG_SYS_INIT_RAM_LOCK=y
 CONFIG_TARGET_P1010RDB_PA=y
 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_USE_UBOOTPATH=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_FSL_FIXED_MMC_LOCATION=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
@@ -18,10 +27,13 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
@@ -33,16 +45,20 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eTSEC1"
-CONFIG_DM=y
+CONFIG_USE_ROOTPATH=y
+CONFIG_FSL_SATA_V2=y
 CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_SYS_SPD_BUS_NUM=1
 CONFIG_CHIP_SELECTS_PER_CTRL=1
+CONFIG_SYS_DDR_RAW_TIMING=y
+CONFIG_COMMON_INIT_DDR=y
+CONFIG_SPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -55,7 +71,10 @@ CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=256
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
@@ -68,7 +87,6 @@ CONFIG_PHY_NATSEMI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_SMSC=y
 CONFIG_PHY_VITESSE=y
-CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
@@ -76,7 +94,8 @@ CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_PCIE_FSL=y
 CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
+CONFIG_RTC_PT7C4338=y
+CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y