Convert CONFIG_PCIE1 et al to Kconfig

[platform/kernel/u-boot.git] / configs / P1010RDB-PA_NOR_defconfig

diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig
index abeb433..89fccd6 100644 (file)
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ b/configs/P1010RDB-PA_NOR_defconfig
@@ -1,21 +1,30 @@
 CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0xEFF40000
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
+CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_FSL_FIXED_MMC_LOCATION=y
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -31,10 +40,20 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_FSL_SATA_V2=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_SYS_SPD_BUS_NUM=1
+CONFIG_CHIP_SELECTS_PER_CTRL=1
+CONFIG_SYS_DDR_RAW_TIMING=y
+CONFIG_COMMON_INIT_DDR=y
+CONFIG_SPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -49,7 +68,6 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_ATHEROS=y
@@ -74,3 +92,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_FSL=y