Convert CONFIG_FSL_SATA_V2 to Kconfig

[platform/kernel/u-boot.git] / configs / P1010RDB-PA_NAND_defconfig

diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig
index fca971b..5d8305e 100644 (file)
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@@ -1,13 +1,12 @@
 CONFIG_PPC=y
-CONFIG_SYS_IMMR=0xFFE00000
-CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_TEXT_BASE=0x11000000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
 CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL=y
-CONFIG_TPL_TEXT_BASE=0xD0001000
+CONFIG_TPL_TEXT_BASE=0xD0000000
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_SERIAL=y
@@ -19,7 +18,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
+CONFIG_TPL_SYS_MONITOR_BASE=0xD0000000
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
@@ -32,7 +31,16 @@ CONFIG_SPL_NAND_BOOT=y
 CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
 CONFIG_SPL_INIT_MINIMAL=y
 CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000
+CONFIG_SPL_RELOC_STACK=0xd003fff0
+CONFIG_TPL_GD_ADDR=0xd002c000
+CONFIG_TPL_RELOC_TEXT_BASE=0xd0000000
+CONFIG_TPL_RELOC_STACK=0xd0030000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_TPL=y
 CONFIG_TPL_MAX_SIZE=0x20000
 CONFIG_TPL_DRIVERS_MISC=y
@@ -63,6 +71,7 @@ CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_FSL_SATA_V2=y
 CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666