disk: convert CONFIG_ISO_PARTITION to Kconfig

[platform/kernel/u-boot.git] / configs / Mele_A1000G_quad_defconfig

diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index 3a746c8..d93757b 100644 (file)
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -1,24 +1,23 @@
-# The Mele A1000G quad is yet another Allwinnner based Android top set box
-# from Mele.
-#
-# It uses the same case as the original Mele A1000 and the same PCB as the M9,
-# the  USM sata storage slot is connected via anusb to sata bridge connected to
-# the otg controller, this renders the micro USB B receptacle non functional.
-#
-# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
-# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
-# RTL R8188EU (USB) wifi and a full size sdcard slot
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_ZQ=120
+CONFIG_INITIAL_USB_SCAN_DELAY=2000
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_AXP221_DCDC1_VOLT=3300
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_DLDO4_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3300
+CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_AXP_ALDO1_VOLT=3300
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_AXP_DLDO4_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y