#include <common.h>
#include <virtex2.h>
#include <spartan2.h>
+#include <spartan3.h>
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
#if 0
#define FPGA_DEBUG
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!xilinx_validate (desc, __FUNCTION__)) {
+ if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Loader...\n",
__FUNCTION__);
ret_val = Spartan2_load (desc, buf, bsize);
__FUNCTION__);
#endif
break;
+ case Xilinx_Spartan3:
+#if defined(CONFIG_FPGA_SPARTAN3)
+ PRINTF ("%s: Launching the Spartan-III Loader...\n",
+ __FUNCTION__);
+ ret_val = Spartan3_load (desc, buf, bsize);
+#else
+ printf ("%s: No support for Spartan-III devices.\n",
+ __FUNCTION__);
+#endif
+ break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Loader...\n",
__FUNCTION__);
ret_val = Virtex2_load (desc, buf, bsize);
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!xilinx_validate (desc, __FUNCTION__)) {
+ if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Reader...\n",
__FUNCTION__);
ret_val = Spartan2_dump (desc, buf, bsize);
__FUNCTION__);
#endif
break;
+ case Xilinx_Spartan3:
+#if defined(CONFIG_FPGA_SPARTAN3)
+ PRINTF ("%s: Launching the Spartan-III Reader...\n",
+ __FUNCTION__);
+ ret_val = Spartan3_dump (desc, buf, bsize);
+#else
+ printf ("%s: No support for Spartan-III devices.\n",
+ __FUNCTION__);
+#endif
+ break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined( CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Reader...\n",
__FUNCTION__);
ret_val = Virtex2_dump (desc, buf, bsize);
{
int ret_val = FPGA_FAIL;
- if (xilinx_validate (desc, __FUNCTION__)) {
+ if (xilinx_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Xilinx_Spartan2:
printf ("Spartan-II\n");
break;
+ case Xilinx_Spartan3:
+ printf ("Spartan-III\n");
+ break;
case Xilinx_Virtex2:
printf ("Virtex-II\n");
break;
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
Spartan2_info (desc);
#else
/* just in case */
__FUNCTION__);
#endif
break;
+ case Xilinx_Spartan3:
+#if defined(CONFIG_FPGA_SPARTAN3)
+ Spartan3_info (desc);
+#else
+ /* just in case */
+ printf ("%s: No support for Spartan-III devices.\n",
+ __FUNCTION__);
+#endif
+ break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
Virtex2_info (desc);
#else
/* just in case */
/* Add new family types here */
default:
/* we don't need a message here - we give one up above */
+ ;
}
} else
printf ("No Device Function Table.\n");
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!xilinx_validate (desc, __FUNCTION__)) {
+ if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
ret_val = Spartan2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Spartan-II devices.\n",
__FUNCTION__);
#endif
break;
+ case Xilinx_Spartan3:
+#if defined(CONFIG_FPGA_SPARTAN3)
+ ret_val = Spartan3_reloc (desc, reloc_offset);
+#else
+ printf ("%s: No support for Spartan-III devices.\n",
+ __FUNCTION__);
+#endif
+ break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
ret_val = Virtex2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Virtex-II devices.\n",
return ret_val;
}
-#endif /* CONFIG_FPGA & CFG_FPGA_XILINX */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_XILINX */