#include <common.h>
#include <command.h>
+#include <dm.h>
+#include <errno.h>
#include <asm/processor.h>
#include <asm/unaligned.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
+#include <dm/root.h>
+
+DECLARE_GLOBAL_DATA_PTR;
#include <usb.h>
#ifdef CONFIG_4xx
#include <asm/4xx_pci.h>
#endif
-#ifndef CONFIG_USB_HUB_MIN_POWER_ON_DELAY
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 100
-#endif
-
#define USB_BUFSIZ 512
+/* TODO(sjg@chromium.org): Remove this when CONFIG_DM_USB is defined */
static struct usb_hub_device hub_dev[USB_MAX_HUB];
static int usb_hub_index;
data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
}
-static int usb_get_port_status(struct usb_device *dev, int port, void *data)
+int usb_get_port_status(struct usb_device *dev, int port, void *data)
{
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
int i;
struct usb_device *dev;
unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2;
- ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
- unsigned short portstatus;
- int ret;
+ const char *env;
dev = hub->pusb_dev;
- /*
- * Enable power to the ports:
- * Here we Power-cycle the ports: aka,
- * turning them off and turning on again.
- */
debug("enabling power on all ports\n");
for (i = 0; i < dev->maxchild; i++) {
- usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
- debug("port %d returns %lX\n", i + 1, dev->status);
- }
-
- /* Wait at least 2*bPwrOn2PwrGood for PP to change */
- mdelay(pgood_delay);
-
- for (i = 0; i < dev->maxchild; i++) {
- ret = usb_get_port_status(dev, i + 1, portsts);
- if (ret < 0) {
- debug("port %d: get_port_status failed\n", i + 1);
- continue;
- }
-
- /*
- * Check to confirm the state of Port Power:
- * xHCI says "After modifying PP, s/w shall read
- * PP and confirm that it has reached the desired state
- * before modifying it again, undefined behavior may occur
- * if this procedure is not followed".
- * EHCI doesn't say anything like this, but no harm in keeping
- * this.
- */
- portstatus = le16_to_cpu(portsts->wPortStatus);
- if (portstatus & (USB_PORT_STAT_POWER << 1)) {
- debug("port %d: Port power change failed\n", i + 1);
- continue;
- }
- }
-
- for (i = 0; i < dev->maxchild; i++) {
usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
debug("port %d returns %lX\n", i + 1, dev->status);
}
- /* Wait for power to become stable */
- mdelay(max(pgood_delay, CONFIG_USB_HUB_MIN_POWER_ON_DELAY));
+ /*
+ * Wait for power to become stable,
+ * plus spec-defined max time for device to connect
+ * but allow this time to be increased via env variable as some
+ * devices break the spec and require longer warm-up times
+ */
+ env = getenv("usb_pgood_delay");
+ if (env)
+ pgood_delay = max(pgood_delay,
+ (unsigned)simple_strtol(env, NULL, 0));
+ debug("pgood_delay=%dms\n", pgood_delay);
+ mdelay(pgood_delay + 1000);
}
void usb_hub_reset(void)
return speed_str;
}
-int hub_port_reset(struct usb_device *dev, int port,
+int legacy_hub_port_reset(struct usb_device *dev, int port,
unsigned short *portstat)
{
- int tries;
+ int err, tries;
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
unsigned short portstatus, portchange;
- debug("hub_port_reset: resetting port %d...\n", port);
+#ifdef CONFIG_DM_USB
+ debug("%s: resetting '%s' port %d...\n", __func__, dev->dev->name,
+ port + 1);
+#else
+ debug("%s: resetting port %d...\n", __func__, port + 1);
+#endif
for (tries = 0; tries < MAX_TRIES; tries++) {
+ err = usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
+ if (err < 0)
+ return err;
- usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
mdelay(200);
if (usb_get_port_status(dev, port + 1, portsts) < 0) {
(portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
(portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
- if ((portchange & USB_PORT_STAT_C_CONNECTION) ||
- !(portstatus & USB_PORT_STAT_CONNECTION))
- return -1;
+ /*
+ * Perhaps we should check for the following here:
+ * - C_CONNECTION hasn't been set.
+ * - CONNECTION is still set.
+ *
+ * Doing so would ensure that the device is still connected
+ * to the bus, and hasn't been unplugged or replaced while the
+ * USB bus reset was going on.
+ *
+ * However, if we do that, then (at least) a San Disk Ultra
+ * USB 3.0 16GB device fails to reset on (at least) an NVIDIA
+ * Tegra Jetson TK1 board. For some reason, the device appears
+ * to briefly drop off the bus when this second bus reset is
+ * executed, yet if we retry this loop, it'll eventually come
+ * back after another reset or two.
+ */
if (portstatus & USB_PORT_STAT_ENABLE)
break;
return 0;
}
+#ifdef CONFIG_DM_USB
+int hub_port_reset(struct udevice *dev, int port, unsigned short *portstat)
+{
+ struct usb_device *udev = dev_get_parentdata(dev);
+
+ return legacy_hub_port_reset(udev, port, portstat);
+}
+#endif
-void usb_hub_port_connect_change(struct usb_device *dev, int port)
+int usb_hub_port_connect_change(struct usb_device *dev, int port)
{
- struct usb_device *usb;
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
unsigned short portstatus;
+ int ret, speed;
/* Check status */
- if (usb_get_port_status(dev, port + 1, portsts) < 0) {
+ ret = usb_get_port_status(dev, port + 1, portsts);
+ if (ret < 0) {
debug("get_port_status failed\n");
- return;
+ return ret;
}
portstatus = le16_to_cpu(portsts->wPortStatus);
/* Disconnect any existing devices under this port */
if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
- (!(portstatus & USB_PORT_STAT_ENABLE))) || (dev->children[port])) {
+ (!(portstatus & USB_PORT_STAT_ENABLE))) ||
+ usb_device_has_child_on_port(dev, port)) {
debug("usb_disconnect(&hub->children[port]);\n");
/* Return now if nothing is connected */
if (!(portstatus & USB_PORT_STAT_CONNECTION))
- return;
+ return -ENOTCONN;
}
mdelay(200);
/* Reset the port */
- if (hub_port_reset(dev, port, &portstatus) < 0) {
- printf("cannot reset port %i!?\n", port + 1);
- return;
+ ret = legacy_hub_port_reset(dev, port, &portstatus);
+ if (ret < 0) {
+ if (ret != -ENXIO)
+ printf("cannot reset port %i!?\n", port + 1);
+ return ret;
}
mdelay(200);
- /* Allocate a new device struct for it */
- usb = usb_alloc_new_device(dev->controller);
-
switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
case USB_PORT_STAT_SUPER_SPEED:
- usb->speed = USB_SPEED_SUPER;
+ speed = USB_SPEED_SUPER;
break;
case USB_PORT_STAT_HIGH_SPEED:
- usb->speed = USB_SPEED_HIGH;
+ speed = USB_SPEED_HIGH;
break;
case USB_PORT_STAT_LOW_SPEED:
- usb->speed = USB_SPEED_LOW;
+ speed = USB_SPEED_LOW;
break;
default:
- usb->speed = USB_SPEED_FULL;
+ speed = USB_SPEED_FULL;
break;
}
+#ifdef CONFIG_DM_USB
+ struct udevice *child;
+
+ ret = usb_scan_device(dev->dev, port + 1, speed, &child);
+#else
+ struct usb_device *usb;
+
+ ret = usb_alloc_new_device(dev->controller, &usb);
+ if (ret) {
+ printf("cannot create new device: ret=%d", ret);
+ return ret;
+ }
+
dev->children[port] = usb;
+ usb->speed = speed;
usb->parent = dev;
usb->portnr = port + 1;
/* Run it through the hoops (find a driver, etc) */
- if (usb_new_device(usb)) {
+ ret = usb_new_device(usb);
+ if (ret < 0) {
/* Woops, disable the port */
- usb_free_device();
+ usb_free_device(dev->controller);
dev->children[port] = NULL;
+ }
+#endif
+ if (ret < 0) {
debug("hub: disabling port %d\n", port + 1);
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
}
+
+ return ret;
}
static int usb_hub_configure(struct usb_device *dev)
{
- int i;
+ int i, length;
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
unsigned char *bitmap;
short hubCharacteristics;
struct usb_hub_descriptor *descriptor;
struct usb_hub_device *hub;
__maybe_unused struct usb_hub_status *hubsts;
+ int ret;
/* "allocate" Hub device */
hub = usb_hub_allocate();
if (hub == NULL)
- return -1;
+ return -ENOMEM;
hub->pusb_dev = dev;
/* Get the the hub descriptor */
- if (usb_get_hub_descriptor(dev, buffer, 4) < 0) {
+ ret = usb_get_hub_descriptor(dev, buffer, 4);
+ if (ret < 0) {
debug("usb_hub_configure: failed to get hub " \
"descriptor, giving up %lX\n", dev->status);
- return -1;
+ return ret;
}
descriptor = (struct usb_hub_descriptor *)buffer;
- /* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */
- i = descriptor->bLength;
- if (i > USB_BUFSIZ) {
- debug("usb_hub_configure: failed to get hub " \
- "descriptor - too long: %d\n", descriptor->bLength);
- return -1;
- }
+ length = min_t(int, descriptor->bLength,
+ sizeof(struct usb_hub_descriptor));
- if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) {
+ ret = usb_get_hub_descriptor(dev, buffer, length);
+ if (ret < 0) {
debug("usb_hub_configure: failed to get hub " \
"descriptor 2nd giving up %lX\n", dev->status);
- return -1;
+ return ret;
}
- memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
+ memcpy((unsigned char *)&hub->desc, buffer, length);
/* adjust 16bit values */
put_unaligned(le16_to_cpu(get_unaligned(
&descriptor->wHubCharacteristics)),
if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
debug("usb_hub_configure: failed to get Status - " \
"too long: %d\n", descriptor->bLength);
- return -1;
+ return -EFBIG;
}
- if (usb_get_hub_status(dev, buffer) < 0) {
+ ret = usb_get_hub_status(dev, buffer);
+ if (ret < 0) {
debug("usb_hub_configure: failed to get Status %lX\n",
dev->status);
- return -1;
+ return ret;
}
#ifdef DEBUG
int ret;
ulong start = get_timer(0);
+#ifdef CONFIG_DM_USB
+ debug("\n\nScanning '%s' port %d\n", dev->dev->name, i + 1);
+#else
+ debug("\n\nScanning port %d\n", i + 1);
+#endif
/*
* Wait for (whichever finishes first)
* - A maximum of 10 seconds
* them again. Works at least with mouse driver */
if (!(portstatus & USB_PORT_STAT_ENABLE) &&
(portstatus & USB_PORT_STAT_CONNECTION) &&
- ((dev->children[i]))) {
+ usb_device_has_child_on_port(dev, i)) {
debug("already running port %i " \
"disabled by hub (EMI?), " \
"re-enabling...\n", i + 1);
return 0;
}
-int usb_hub_probe(struct usb_device *dev, int ifnum)
+static int usb_hub_check(struct usb_device *dev, int ifnum)
{
struct usb_interface *iface;
- struct usb_endpoint_descriptor *ep;
- int ret;
+ struct usb_endpoint_descriptor *ep = NULL;
iface = &dev->config.if_desc[ifnum];
/* Is it a hub? */
if (iface->desc.bInterfaceClass != USB_CLASS_HUB)
- return 0;
+ goto err;
/* Some hubs have a subclass of 1, which AFAICT according to the */
/* specs is not defined, but it works */
if ((iface->desc.bInterfaceSubClass != 0) &&
(iface->desc.bInterfaceSubClass != 1))
- return 0;
+ goto err;
/* Multiple endpoints? What kind of mutant ninja-hub is this? */
if (iface->desc.bNumEndpoints != 1)
- return 0;
+ goto err;
ep = &iface->ep_desc[0];
/* Output endpoint? Curiousier and curiousier.. */
if (!(ep->bEndpointAddress & USB_DIR_IN))
- return 0;
+ goto err;
/* If it's not an interrupt endpoint, we'd better punt! */
if ((ep->bmAttributes & 3) != 3)
- return 0;
+ goto err;
/* We found a hub */
debug("USB hub found\n");
+ return 0;
+
+err:
+ debug("USB hub not found: bInterfaceClass=%d, bInterfaceSubClass=%d, bNumEndpoints=%d\n",
+ iface->desc.bInterfaceClass, iface->desc.bInterfaceSubClass,
+ iface->desc.bNumEndpoints);
+ if (ep) {
+ debug(" bEndpointAddress=%#x, bmAttributes=%d",
+ ep->bEndpointAddress, ep->bmAttributes);
+ }
+
+ return -ENOENT;
+}
+
+int usb_hub_probe(struct usb_device *dev, int ifnum)
+{
+ int ret;
+
+ ret = usb_hub_check(dev, ifnum);
+ if (ret)
+ return 0;
ret = usb_hub_configure(dev);
return ret;
}
+
+#ifdef CONFIG_DM_USB
+int usb_hub_scan(struct udevice *hub)
+{
+ struct usb_device *udev = dev_get_parentdata(hub);
+
+ return usb_hub_configure(udev);
+}
+
+static int usb_hub_post_bind(struct udevice *dev)
+{
+ /* Scan the bus for devices */
+ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+}
+
+static int usb_hub_post_probe(struct udevice *dev)
+{
+ debug("%s\n", __func__);
+ return usb_hub_scan(dev);
+}
+
+static const struct udevice_id usb_hub_ids[] = {
+ { .compatible = "usb-hub" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_generic_hub) = {
+ .name = "usb_hub",
+ .id = UCLASS_USB_HUB,
+ .of_match = usb_hub_ids,
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+
+UCLASS_DRIVER(usb_hub) = {
+ .id = UCLASS_USB_HUB,
+ .name = "usb_hub",
+ .post_bind = usb_hub_post_bind,
+ .post_probe = usb_hub_post_probe,
+ .child_pre_probe = usb_child_pre_probe,
+ .per_child_auto_alloc_size = sizeof(struct usb_device),
+ .per_child_platdata_auto_alloc_size = sizeof(struct usb_dev_platdata),
+};
+
+static const struct usb_device_id hub_id_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
+ .bDeviceClass = USB_CLASS_HUB
+ },
+ { } /* Terminating entry */
+};
+
+USB_DEVICE(usb_generic_hub, hub_id_table);
+
+#endif